April 2015 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Apr 1 07:26:14 UTC 2015
Ending: Thu Apr 30 14:57:12 UTC 2015
Messages: 148

• [ipxe-devel] [PATCH 0/7] IPv6 and iBFT update   Hannes Reinecke
• [ipxe-devel] [PATCH 1/7] icmpv6: Decode error codes   Hannes Reinecke
• [ipxe-devel] [PATCH 2/7] dhcpv6: Fallback to using DUID-LL for empty UUID   Hannes Reinecke
• [ipxe-devel] [PATCH 3/7] ipv6: Update link-local route when configuring network device   Hannes Reinecke
• [ipxe-devel] [PATCH 4/7] ipv6: Allow manual network configuration   Hannes Reinecke
• [ipxe-devel] [PATCH 5/7] iscsi: Parse IPv6 address for rootpath   Hannes Reinecke
• [ipxe-devel] [PATCH 6/7] ibft: IPv6 support   Hannes Reinecke
• [ipxe-devel] [PATCH 7/7] ibft: multiple session support   Hannes Reinecke
• [ipxe-devel] EFI booting   Christian Hesse
• [ipxe-devel] [PATCH 1/1] make sure not to generate position independent code   Christian Hesse
• [ipxe-devel] Serial port info   Bjørnar Ness
• [ipxe-devel] kernel panic with ipxe.efi   Christian Hesse
• [ipxe-devel] Serial port info   Ján ONDREJ (SAL)
• [ipxe-devel] kernel panic with ipxe.efi   Christian Nilsson
• [ipxe-devel] kernel panic with ipxe.efi   Christian Hesse
• [ipxe-devel] kernel panic with ipxe.efi   Andreas Fink
• [ipxe-devel] kernel panic with ipxe.efi   Christian Hesse
• [ipxe-devel] kernel panic with ipxe.efi   Robin Smidsrød
• [ipxe-devel] kernel panic with ipxe.efi   Christian Hesse
• [ipxe-devel] Could not open SAN device: Connection reset   Frankd DiMitri
• [ipxe-devel] kernel panic with ipxe.efi   Robin Smidsrød
• [ipxe-devel] [ipxe] [build] Rewrite parserom.pl to support multiple source files (#35)   Robin Smidsrød
• [ipxe-devel] kernel panic with ipxe.efi   Christian Hesse
• [ipxe-devel] kernel panic with ipxe.efi   Christian Hesse
• [ipxe-devel] [PATCH 1/1] [build] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] EFI booting   Christian Hesse
• [ipxe-devel] [PATCH 1/1] make sure not to generate position independent code   Christian Hesse
• [ipxe-devel] [PATCH 1/1] [build] Fix no-PIE workaround for i386 builds   Christian Hesse
• [ipxe-devel] iPXE and NIC with fiber cable medium   GribanovAnton
• [ipxe-devel] RFE: update error page for LIO   Alexander Todorov
• [ipxe-devel] [PATCH 1/1] [build] reintroduce support for mkisofs and genisoimage   Christian Hesse
• [ipxe-devel] Embedding certificates   Nicolas Sylvain
• [ipxe-devel] Regarding Error 0x040ee119 while running dhcp command in IPXE prompt   Shishir Pahi
• [ipxe-devel] [PATCH 0/7] ipxe: update pxe boot roms for qemu   Gerd Hoffmann
• [ipxe-devel] [PATCH 1/7] ipxe: update from 35c53797 to dc795b9   Gerd Hoffmann
• [ipxe-devel] [PATCH 2/7] ipxe: rm local config in cleanup   Gerd Hoffmann
• [ipxe-devel] [PATCH 3/7] ipxe: add local patches   Gerd Hoffmann
• [ipxe-devel] [PATCH 4/7] ipxe: disable load file protocol   Gerd Hoffmann
• [ipxe-devel] [PATCH 5/7] ipxe: add qemu branding   Gerd Hoffmann
• [ipxe-devel] [PATCH 6/7] ipxe: don't override GITVERSION   Gerd Hoffmann
• [ipxe-devel] [PATCH 7/7] ipxe: update binaries   Gerd Hoffmann
• [ipxe-devel] [PATCH 0/2] virtio-net shutdown fix for ExitBootServices()   Laszlo Ersek
• [ipxe-devel] [PATCH 1/2] virtio-net: downgrade iobuf-level debug messages to DBGC2   Laszlo Ersek
• [ipxe-devel] [PATCH 2/2] virtio-net: reset virtio NICs when booting under UEFI   Laszlo Ersek
• [ipxe-devel] [PATCH 2/2] virtio-net: reset virtio NICs when booting under UEFI   Michael Brown
• [ipxe-devel] [PATCH 1/2] virtio-net: downgrade iobuf-level debug messages to DBGC2   Michael Brown
• [ipxe-devel] [PATCH 2/2] virtio-net: reset virtio NICs when booting under UEFI   Laszlo Ersek
• [ipxe-devel] [PATCH 2/2] virtio-net: reset virtio NICs when booting under UEFI   Laszlo Ersek
• [ipxe-devel] [Qemu-devel] [PATCH 3/7] ipxe: add local patches   Andreas Färber
• [ipxe-devel] [PATCH 2/2] virtio-net: reset virtio NICs when booting under UEFI   Michael Brown
• [ipxe-devel] [ipxe] [build] Rewrite parserom.pl to support multiple source files (#35)   Michael Brown
• [ipxe-devel] [ipxe] tftp booting from a windows TFTP server gives issues. (#31)   Michael Brown
• [ipxe-devel] [ipxe] Restore code to strip an initial '/' from TFTP RRQ. (#19)   Michael Brown
• [ipxe-devel] RFE: update error page for LIO   Robin Smidsrød
• [ipxe-devel] [PATCH 1/1] [build] reintroduce support for mkisofs and genisoimage   Robin Smidsrød
• [ipxe-devel] RFE: update error page for LIO   Alexander Todorov
• [ipxe-devel] Embedding certificates   Nicolas Sylvain
• [ipxe-devel] [RESEND PATCH] efi_snp: improve compliance with the EFI_SIMPLE_NETWORK_PROTOCOL spec   Gerd Hoffmann
• [ipxe-devel] [RESEND PATCH] [efi] make load file protocol optional   Gerd Hoffmann
• [ipxe-devel] [Qemu-devel] [PATCH 3/7] ipxe: add local patches   Gerd Hoffmann
• [ipxe-devel] compilation fails on openbsd   Jiri B
• [ipxe-devel] HTTP proxy support   Jeffers, Steven
• [ipxe-devel] Realtek 8111/8168b   Evan Prohaska
• [ipxe-devel] new user post reply   Renato R
• [ipxe-devel] Error for CPU Kernal   GIRISH BAMMANAWADI
• [ipxe-devel] Wimboot fail to proprelly work on some hardware and config   The Phantom
• [ipxe-devel] [PATCH 1/1] [build] reintroduce support for mkisofs and genisoimage   Christian Hesse
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Nilsson
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Nilsson
• [ipxe-devel] ipxe hangs on boot when receiving a jumbo frame   ahmed
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] FTP connection with Wimboot   Christian Nilsson
• [ipxe-devel] EFI type image load support   Michael Brown
• [ipxe-devel] LACP issues   Michael Brown
• [ipxe-devel] Wimboot from GRUB2 PXE with UEFI on HP Gen9   Michael Brown
• [ipxe-devel] [PATCH] Update PCI device IDs for Intel 82599 and X540 10G NICs   Michael Brown
• [ipxe-devel] [Mohon Peak] Add support for internal SGMII controller   Michael Brown
• [ipxe-devel] Could not open SAN device: Connection reset   Michael Brown
• [ipxe-devel] ipxe hangs on boot when receiving a jumbo frame   Michael Brown
• [ipxe-devel] [Mohon Peak] Add support for internal SGMII controller   Patrick Agrain
• [ipxe-devel] ipxe hangs on boot when receiving a jumbo frame   ahmed
• [ipxe-devel] ipxe hangs on boot when receiving a jumbo frame   Michael Brown
• [ipxe-devel] ipxe hangs on boot when receiving a jumbo frame   ahmed
• [ipxe-devel] 0xc000000d   Christian Nilsson
• [ipxe-devel] error 0x040ee186   Christian Nilsson
• [ipxe-devel] Error for CPU Kernal   Christian Nilsson
• [ipxe-devel] Regarding Error 0x040ee119 while running dhcp command in IPXE prompt   Christian Nilsson
• [ipxe-devel] wimboot error   Christian Nilsson
• [ipxe-devel] Regarding Error 0x040ee119 while running dhcp command in IPXE prompt   Shishir Pahi
• [ipxe-devel] iPXE Question - Used with Auto Deploy   Austen Simpson
• [ipxe-devel] [PATCH 1/1] [intel] Add PCI device IDs for Intel I218-LM and I218-V   Christian Hesse
• [ipxe-devel] iPXE Question - Used with Auto Deploy   Michael Brown
• [ipxe-devel] [PATCH 1/1] [intel] Add PCI device IDs for Intel I218-LM and I218-V   Michael Brown
• [ipxe-devel] iPXE Question - Used with Auto Deploy   Austen Simpson
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] 0xc000000d   Steevie Mize
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Nilsson
• [ipxe-devel] [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)   Christian Hesse
• [ipxe-devel] [PATCH 1/2] make variables const   Christian Hesse
• [ipxe-devel] [PATCH 2/2] [ath9k] remove confusing logic inversion in an ANI variable   Christian Hesse
• [ipxe-devel] The problem with operation of IMA of images of HDD is more than 2GB   Alex
• [ipxe-devel] [PATCH 1/2] make variables const   Michael Brown
• [ipxe-devel] [PATCH 2/2] [ath9k] remove confusing logic inversion in an ANI variable   Michael Brown
• [ipxe-devel] IPv6 / iBFT patches   Hannes Reinecke
• [ipxe-devel] [PATCH 1/1] [build] Fix no-PIE workaround for i386 builds   Christian Hesse
• [ipxe-devel] [PATCH 1/1] [build] Fix no-PIE workaround for i386 builds   Michael Brown
• [ipxe-devel] [PATCH 1/7] icmpv6: Decode error codes   Michael Brown
• [ipxe-devel] [PATCH 3/7] ipv6: Update link-local route when configuring network device   Michael Brown
• [ipxe-devel] [PATCH 2/7] dhcpv6: Fallback to using DUID-LL for empty UUID   Michael Brown
• [ipxe-devel] [PATCH 4/7] ipv6: Allow manual network configuration   Michael Brown
• [ipxe-devel] [PATCH 1/1] [build] Fix no-PIE workaround for i386 builds   Christian Hesse
• [ipxe-devel] [PATCH 4/7] ipv6: Allow manual network configuration   Marin Hannache
• [ipxe-devel] [PATCH] [bios] Add ANSI blink attribute   Christian Nilsson
• [ipxe-devel] 2d12603b   Robin Smidsrød
• [ipxe-devel] IPv6 ipxe problem   Robin Smidsrød
• [ipxe-devel] DHCP configuring error 0x40ee186   Robin Smidsrød
• [ipxe-devel] Cannot boot from wire or usb, hangs on initializing devices.   Robin Smidsrød
• [ipxe-devel] Boot Issue   Robin Smidsrød
• [ipxe-devel] iPXE and NIC with fiber cable medium   Robin Smidsrød
• [ipxe-devel] Realtek 8111/8168b   Robin Smidsrød
• [ipxe-devel] FTP connection with Wimboot   Robin Smidsrød
• [ipxe-devel] [PATCH 1/1] [intel] Add PCI device IDs for Intel I218-LM and I218-V   Robin Smidsrød
• [ipxe-devel] IPv6 / iBFT patches   Robin Smidsrød
• [ipxe-devel] [PATCH 4/7] ipv6: Allow manual network configuration   Hannes Reinecke
• [ipxe-devel] [PATCH 1/7] icmpv6: Decode error codes   Hannes Reinecke
• [ipxe-devel] [PATCH 2/7] dhcpv6: Fallback to using DUID-LL for empty UUID   Hannes Reinecke
• [ipxe-devel] [PATCH 3/7] ipv6: Update link-local route when configuring network device   Hannes Reinecke
• [ipxe-devel] Realtek 8111/8168b   Christian Stroehmeier
• [ipxe-devel] windows 8 doesn't boot from undionly.kkpxe   Jeong Woo Seo
• [ipxe-devel] Realtek 8111/8168b   Michael Brown
• [ipxe-devel] windows 8 doesn't boot from undionly.kkpxe   Michael Brown
• [ipxe-devel] starting ipxe.hd from a *running* winxp (or from winxp bootloader)?   Oliver Rath
• [ipxe-devel] [PATCHv2 00/10] IPv6 and iBFT update   Hannes Reinecke
• [ipxe-devel] [PATCH 01/10] icmpv6: Decode error codes   Hannes Reinecke
• [ipxe-devel] [PATCH 02/10] dhcpv6: Fallback to using DUID-LL for empty UUID   Hannes Reinecke
• [ipxe-devel] [PATCH 03/10] ethernet: do not construct EUI-64 identifier for empty MAC   Hannes Reinecke
• [ipxe-devel] [PATCH 04/10] ipv6: Update link-local route when configuring network device   Hannes Reinecke
• [ipxe-devel] [PATCH 05/10] ndp: make IPv6 prefix user-settable   Hannes Reinecke
• [ipxe-devel] [PATCH 06/10] ndp: make IPv6 gateway user-settable   Hannes Reinecke
• [ipxe-devel] [PATCH 07/10] ipv6: Allow manual network configuration   Hannes Reinecke
• [ipxe-devel] [PATCH 08/10] iscsi: Parse IPv6 address for rootpath   Hannes Reinecke
• [ipxe-devel] [PATCH 09/10] ibft: IPv6 support   Hannes Reinecke
• [ipxe-devel] [PATCH 10/10] ibft: multiple session support   Hannes Reinecke
• [ipxe-devel] [PATCH 10/10] ibft: multiple session support   Robin Smidsrød

Last message date: Thu Apr 30 14:57:12 UTC 2015
Archived on: Sun Aug 11 10:22:55 UTC 2024

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...