[ipxe-devel] ipxe hangs on boot when receiving a jumbo frame

[ahmed]

Hi again,

using ipxe.pxe instead seems to fix the problem.
Thanks a lot

Ahmed

Le 21/04/2015 17:43, Michael Brown a écrit :
> On 21/04/15 16:36, ahmed wrote:
>> ifstat indicate that we are using undionly
>> "net0: XX:XX:XX:XX:XX:XX using undionly on UNDI-PCI82:00.1 (closed)
>>
>>    [Link:up, TX:0 TXE:0 RX:0 RXE:0]"
>>
>> seems that this one does not support jumbo
> 
> OK.  That means that you are using the underlying OEM UNDI driver, over
> which we have no control.  Is this a NIC which is natively supported by
> iPXE?  Try using ipxe.pxe instead of undionly.kpxe and see if that makes
> a difference.
> 
> Michael
>