[ipxe-devel] ipxe hangs on boot when receiving a jumbo frame

[Michael Brown]

On 21/04/15 16:36, ahmed wrote:
> ifstat indicate that we are using undionly
> "net0: XX:XX:XX:XX:XX:XX using undionly on UNDI-PCI82:00.1 (closed)
>
>    [Link:up, TX:0 TXE:0 RX:0 RXE:0]"
>
> seems that this one does not support jumbo

OK.  That means that you are using the underlying OEM UNDI driver, over 
which we have no control.  Is this a NIC which is natively supported by 
iPXE?  Try using ipxe.pxe instead of undionly.kpxe and see if that makes 
a difference.

Michael