November 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Nov 4 08:24:20 UTC 2015
Ending: Mon Nov 30 12:06:54 UTC 2015
Messages: 42

• [ipxe-devel] %lld format patch   James Harper
  • [ipxe-devel] %lld format patch   Michael Brown
    • [ipxe-devel] %lld format patch   James Harper
      • [ipxe-devel] %lld format patch   Michael Brown
    • [ipxe-devel] %lld format patch   James Harper
• [ipxe-devel] boot.php no permitted   Jerome PlayzMC
• [ipxe-devel] [PATCH] Intel i210/i211: Add PCI IDs for flashless operation   Kyösti Mälkki
  • [ipxe-devel] [PATCH] Intel i210/i211: Add PCI IDs for flashless operation   Michael Brown
• [ipxe-devel] Timed delays in wimboot   Earl Chew
  • [ipxe-devel] Timed delays in wimboot   Robin Smidsrød
    • [ipxe-devel] Timed delays in wimboot   Earl Chew
• [ipxe-devel] Patch: Correct marking of end in strtoul()   Earl Chew
• [ipxe-devel] Patch: Support %u in printf() et al   Earl Chew
• [ipxe-devel] Patch: Introduce revocable_pause()   Earl Chew
• [ipxe-devel] Patch: Add support for rebootdelay   Earl Chew
• [ipxe-devel] Patch: Add support for pausedelay   Earl Chew
• [ipxe-devel] UEFI not working - "snp->undi.receive() 8000h:9h" flood   Tore Anderson
  • [ipxe-devel] UEFI not working - "snp->undi.receive() 8000h:9h" flood   Michael Brown
    • [ipxe-devel] UEFI not working - "snp->undi.receive() 8000h:9h" flood   Tore Anderson
      • [ipxe-devel] UEFI not working - "snp->undi.receive() 8000h:9h" flood   Michael Brown
      • [ipxe-devel] UEFI not working - "snp->undi.receive() 8000h:9h" flood   Tore Anderson
• [ipxe-devel] Running into problems with Broadcom NICs (14e4-1681 and 14e4-1687)   Jeremy Mlazovsky
• [ipxe-devel] - Close network device (really power down, and bring it back up again)   Torgeir.Wulfsberg at kongsberg.com
  • [ipxe-devel] - Close network device (really power down, and bring it back up again)   Michael Brown
    • [ipxe-devel] - Close network device (really power down, and bring it back up again)   Torgeir.Wulfsberg at kongsberg.com
• [ipxe-devel] Operation is not supported   Aka F
• [ipxe-devel] Enable NET_PROTO_IPV6 by default [in UEFI builds]?   Tore Anderson
• [ipxe-devel] Boot fails if advertised IPv6 prefix isn't on-link   Tore Anderson
  • [ipxe-devel] Boot fails if advertised IPv6 prefix isn't on-link   Hannes Reinecke
• [ipxe-devel] Boot failure when SLAAC and DHCPv6 IA_NA are both used   Tore Anderson
  • [ipxe-devel] Boot failure when SLAAC and DHCPv6 IA_NA are both used   Wissam Shoukair
    • [ipxe-devel] Boot failure when SLAAC and DHCPv6 IA_NA are both used   Tore Anderson
      • [ipxe-devel] Boot failure when SLAAC and DHCPv6 IA_NA are both used   Wissam Shoukair
• [ipxe-devel] Operation not supported   Ben Hildred
• [ipxe-devel] [ipxe] Add set option to prompt to save the input key as a variable (#40)   renini
• [ipxe-devel] [PATCH ipxe] build: Enable IPv6 for qemu   Cole Robinson
• [ipxe-devel] [ipxe] add nfs block dev support (#41)   cleverca22
• [ipxe-devel] - Chainload WDS/SCCM2012 server, with hp8570w and undionly.kpxe, WinPE freezing...   Torgeir.Wulfsberg at kongsberg.com
• [ipxe-devel] [OpenBSD]: Error: unknown pseudo-op: `.reloc' + ld:arch/i386/scripts/i386.lds:97: syntax error   Jiri B
• [ipxe-devel] Chainload WDS/SCCM2012 server, with hp8570w and undionly.kpxe, WinPE freezing...   Torgeir.Wulfsberg at kongsberg.com
• [ipxe-devel] IPXE support for ARM64   Sharma Bhupesh
  • [ipxe-devel] IPXE support for ARM64   Andreas Hammarskjöld

Last message date: Mon Nov 30 12:06:54 UTC 2015
Archived on: Sun Aug 11 10:22:56 UTC 2024

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...