[ipxe-devel] HP NC523SFP / QLogic 82XX (QLogic cLOM8214) UNDI Driver - Network communication - DHCP

[Michael Brown]

On 17/06/15 09:08, Felnhofer, Roland wrote:
> we have currently the following issue with iPXE:
>
> We have 6 HP DL380 each with 2 HP NC523SFP 10Gb NICs. PXE is only
> enabled on the first port of the first NIC.
>
> We using chain-loading to load the iPXE stack.

Which iPXE binary are you chainloading?  I'm assuming that you are 
currently using bin/undionly.kpxe.

You could try using bin/ipxe.pxe (which should, I think, contain a 
native driver for this NIC).

Michael