[ipxe-devel] HP NC523SFP / QLogic 82XX (QLogic cLOM8214) UNDI Driver - Network communication - DHCP

[Felnhofer, Roland]

Hi Michael,

thank you for your response!
I've compiled bin/ipxe.pxe and used it for my tests. Now it seems to work. 
Thank you very much!

Kind regards
Roland



-----Original Message-----
From: Michael Brown [mailto:mcb30 at ipxe.org]
Sent: Freitag, 19. Juni 2015 14:28
To: Felnhofer, Roland; 'ipxe-devel at lists.ipxe.org'
Subject: Re: [ipxe-devel] HP NC523SFP / QLogic 82XX (QLogic cLOM8214) UNDI 
Driver - Network communication - DHCP

On 17/06/15 09:08, Felnhofer, Roland wrote:
> we have currently the following issue with iPXE:
>
> We have 6 HP DL380 each with 2 HP NC523SFP 10Gb NICs. PXE is only
> enabled on the first port of the first NIC.
>
> We using chain-loading to load the iPXE stack.

Which iPXE binary are you chainloading?  I'm assuming that you are currently 
using bin/undionly.kpxe.

You could try using bin/ipxe.pxe (which should, I think, contain a native 
driver for this NIC).

Michael
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4573 bytes
Desc: not available
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20150624/bdb5015c/attachment.p7s>