[ipxe-devel] arbel sanboot ib_srp - Error: Not enough space

[Lee Staples]

Have finally managed to get a working null modem cable, so would be grateful
if some one could take a look and advise what my unexcepted response means.


IBSRP 0x20ce4 for fe800000:00000000:0005ad00:00040965 0005ad00:00040964
CMRC 0x20d24 using QPN 154405
SRP 0x21214
00000000000000000005ad00000466cd->0005ad00000409640005ad0000040964
SRP 0x21214 tag 00000001 LOGIN_REQ:
00000000 : 00 00 00 00 00 00 00 00-69 50 58 45 00 00 00 01 :
........iPXE....
00000010 : 00 00 00 50 00 00 00 00-02 00 00 00 00 00 00 00 :
...P............
00000020 : 00 00 00 00 00 00 00 00-00 05 ad 00 00 04 66 cd :
..............f.
00000030 : 00 05 ad 00 00 04 09 64-00 05 ad 00 00 04 09 64 :
.......d.......d
CM 0x21274 created for IBDEV 0x1f444 QPN 154405
CM 0x21274 connecting to fe800000:00000000:0005ad00:00040965
0005ad00:00040964
CM 0x21274 unexpected response (attribute 0010)
CMRC 0x20d24 disconnected: Operation not supported (http://ipxe.org/3c1e6003
)
SRP 0x21214 closed: Operation not supported (http://ipxe.org/3c1e6003)
Could not open SAN device: Operation not supported (http://ipxe.org/3c1e6003
)
Could not boot from
ib_srp::::fe800000000000000005ad0000040965::0005ad0000040964::0005ad0000040964:0005ad0000040964:
Operation not supported (http://ipxe.org/3c1e6003)
CMRC 0x20d24 shutting down
CMRC 0x20d24 receive error: Operation canceled (http://ipxe.org/0b1360a0)
CMRC 0x20d24 receive error: Operation canceled (http://ipxe.org/0b1360a0)

On 4 February 2011 00:08, Michael Brown <mbrown at fensystems.co.uk> wrote:

>  On Thursday 03 Feb 2011 21:52:39 Lee Staples wrote:
> > I'm trying to sanboot using ib_srp on mellanox III Ex and have used all
> the
> > default setting to make a 15b36282.rom
> >
> > However, when the system going to boot it gives the error message.
> >
> >    Error: Not enough space   http://ipxe.org/err/31216006
> >
> > Can you advise if there are setting I need to adjust from default to free
> >  up enough space?
> >
> > If needed I can rerun with debug options and get a packet dump, or
> anything
> > else that may assist.
>
> iPXE doesn't support RC queue pairs for Arbel HCAs yet.  There is work-in-
> progress in the "arbel" branch in my personal repository:
>
>  http://git.ipxe.org/people/mcb30/ipxe.git/shortlog/refs/heads/arbel
>
> This wasn't working when I last tested it back in September.  I have just
> rebased this branch onto the latest iPXE master; you could try it and see
> if
> it works for you.
>
> Michael
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20110212/b5b85bf2/attachment.htm>