[ipxe-devel] arbel sanboot ib_srp - Error: Not enough space

Lee Staples lee.staples at gmail.com
Fri Feb 4 08:08:57 UTC 2011


On 4 February 2011 08:00, Lee Staples <lee.staples at gmail.com> wrote:

> Hi Michael,
>
> Have quickly tried it before heading off to work now fail's with
>
>   Operation not Supportted: http://ipxe.org/err/3c1e6003
>
> Could you advise on best debug options I should uses to assist with get to
> the root cause.
>
> Thanks
>
> Lee
>
>   On 4 February 2011 00:08, Michael Brown <mbrown at fensystems.co.uk> wrote:
>
>>  On Thursday 03 Feb 2011 21:52:39 Lee Staples wrote:
>> > I'm trying to sanboot using ib_srp on mellanox III Ex and have used all
>> the
>> > default setting to make a 15b36282.rom
>> >
>> > However, when the system going to boot it gives the error message.
>> >
>> >    Error: Not enough space   http://ipxe.org/err/31216006
>> >
>> > Can you advise if there are setting I need to adjust from default to
>> free
>> >  up enough space?
>> >
>> > If needed I can rerun with debug options and get a packet dump, or
>> anything
>> > else that may assist.
>>
>> iPXE doesn't support RC queue pairs for Arbel HCAs yet.  There is work-in-
>> progress in the "arbel" branch in my personal repository:
>>
>>  http://git.ipxe.org/people/mcb30/ipxe.git/shortlog/refs/heads/arbel
>>
>> This wasn't working when I last tested it back in September.  I have just
>> rebased this branch onto the latest iPXE master; you could try it and see
>> if
>> it works for you.
>>
>> Michael
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20110204/894f0657/attachment.htm>


More information about the ipxe-devel mailing list