[ipxe-devel] Can't get IP address under UEFI shell boot by snponly.efi

[Geert Stappers]

> On Thu, Apr 29, 2021 at 01:27:11PM +0800, will.yy.mao at foxconn.com wrote:
> 
> 
> Hi iPXE developers,
> 
>    Our new project met one issue that the SUT can't get IP address under UEFI shell boot by snponly.efi
> 
>    At old project, the SUT can get IP address by below step;
>    1. PXE Boot by snponly.efi
>    2. snponly.efi load UEFI shell(bootx64.efi)
>    3. unload snponly.efi under UEFI shell
>    4. run "connect -r" and "ifconfig -s eth0 dhcp" to get IP address
> 
>    Our NPI  project open DMAr function, the SUT can't boot by old snponly.efi( build version: 30f9 ), we get
>    lastest ipxe source code and make snponly.efi(build version: g3ae83),
>     Repeat the above steps, the SUT can't get IP address.
>    The old project also can't get IP address boot by new snponly.efi.
> 
>    Appreciate your help.

My help was removing HTML noise.
Visit https://lists.ipxe.org/pipermail/ipxe-devel/2021-April/007422.html
and compare with https://lists.ipxe.org/pipermail/ipxe-devel/2021-April/007423.html
for a better picture. In other words: Have a decent e-mail client.



Groeten
Geert Stappers
-- 
Silence is hard to parse