[ipxe-devel] IPXE compilation error with arm64

[Meenakshi Aggarwal]

Hi Michael,

It might be possible that I am doing something wrong,

I am using following steps to launch iPXE:

Shell> fs0:
FS0:\> 808610d3.efi
iPXE initialising devices...ok



iPXE 1.0.0+ (2d79) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE EFI Menu

iPXE> ifstat                             
iPXE> dhcp
iPXE> ifstat
iPXE> config

..................
  reverse-usernam <not specified>                                               
  buildarch...... arm64                                                         
  dhcp-server.... <not specified>                                               
  errno.......... 0x2c1de087                                                    
  platform....... efi                                                           
  priority....... <not specified>                                               
  scriptlet...... <not specified>                                               
  unixtime....... 0x58f6f45e                                                    
  version........ 1.0.0+ (2d79)   
................


Ifstat command is not showing any detected interface.

Here   errno.......... 0x2c1de087    is coming  .

Please help me with what I am missing>


Thanks,
Meenakshi
                                            
-----Original Message-----
From: Michael Brown [mailto:mcb30 at ipxe.org] 
Sent: Tuesday, April 18, 2017 4:53 PM
To: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>; Andreas Fink <afink at list.fink.org>
Cc: ipxe-devel at lists.ipxe.org
Subject: Re: [ipxe-devel] IPXE compilation error with arm64

On 18/04/17 12:20, Meenakshi Aggarwal wrote:
> None of these commands work from iPXE shell:
> Ifstat, dhcp, route etc

You are almost certainly doing something wrong.  You need to give more information so that we can work out what it is.  Saying "it does not work" does not help.

Michael