[ipxe-devel] addendum [was Re: sanhook timeout in spite of correct target + no ping ]

[Oliver Rath]

Hi list,

in addition to my results:

- ipxe boots properly (tftp)
- ipxe-script starts properly
- on debug=iscsi the sanhook says "start negotiation .." then timeout
- tcpdump of the client-start shows thee tftp-traffic, then silence
(some mdns-calls ..)
- the client-pc has 3 nics, booting from the first one
- ipxe has been compiled with the git code from yesterday

HTH
Oliver

On 30.01.2014 20:46, Oliver Rath wrote:
> Hi list,
>
> i have some strange error here: The command
>
> sanhook --drive 0x80
> iscsi:192.168.10.254::::iqn.2012-03.org.linuxtest.liotarget
>
> timed out, although the correct target is set.
>
> If I connect another PC to the same cable and search, i find it:
>
> # iscsi_discovery 192.168.10.254
> iscsiadm: No active sessions.
> Set target iqn.2012-03.org.linuxtest.liotarget to automatic login over
> tcp to portal 192.168.10.254:3260
> Logging out of session [sid: 1, target:
> iqn.2012-03.org.linuxtest.liotarget, portal: 192.168.10.254,3260]
> Logout of [sid: 1, target: iqn.2012-03.org.linuxtest.liotarget, portal:
> 192.168.10.254,3260]: successful
> discovered 1 targets at 192.168.10.254
>
>
> In the same case:
>
> ping 192.168.10.254
>
> (it is compiled in) times out in ipxe). FYI: The parameter -t oder
> --timeout cannot be set.
> Furthermore i cannot ping the machine where ipxe runs although (seen in
> config menu) the IP seems to be set.
>
> Are there maybe restrictions in iscsi target name?
>
> Tfh!
>
> Regards,
> Oliver
>
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel