[ipxe-devel] Set Router at iPXE level

Steve Cross hairlesshobo at stevecross.org
Tue Jul 2 13:41:48 UTC 2013

And I have tried searching it and googling it without any luck. Shows just
how much info really is out there. Thanks folks!
*Steve Cross*
hairlesshobo at stevecross.org

On Tue, Jul 2, 2013 at 4:06 AM, Robin Smidsrød <robin at smidsrod.no> wrote:

> On 02.07.2013 03:15, Steve Cross wrote:
> > Another issue I was dealing with brought up a good point. By default,
> > when working with Windows and iSCSI it sets a static route to the router
> > provided by DHCP, even if the iSCSI server and client are on the same
> > subnet. Using the DHCP option "option routers <ip of iSCSI server>" you
> > can force it to communicate directly. Is there any equivilent setting
> > when working with iPXE by itself (NOT chainloaded from DHCP, but running
> > from say, a usb thumb drive)
> That's already on the FAQ in the forum:
> http://forum.ipxe.org/showthread.php?tid=5948
> > Or am I totally missing something here?
> Easy to miss. So much accumulated info on that forum.
> -- Robin
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20130702/9317c057/attachment.htm>

More information about the ipxe-devel mailing list