[ipxe-devel] iPXE hang on reboot after linux running in KVM?

[Jarrod Johnson]

Additionally, if I go to SeaBIOS 0.6.1, it hangs on firstboot in the same
place.

On Fri, Feb 11, 2011 at 10:57 AM, Jarrod Johnson <
jarrod.b.johnson+ipxe at gmail.com> wrote:

>
>
> On Fri, Feb 11, 2011 at 10:43 AM, Michael Brown <mbrown at fensystems.co.uk>wrote:
>
>> On Friday 11 Feb 2011 15:35:10 Jarrod Johnson wrote:
>> > Running RHEL6 as KVM HOST and replaced the e1000 rom with iPXE.  iPXE
>> runs
>> > fine on first VM boot, but if I let the VM boot into RHEL6 guest and
>> then
>> > reboot from RHEL, iPXE hangs with 'PMM+3FFCAD20' as the last thing
>> printed.
>> > (usually has +3FF8Ad00 after when it works).
>>
>> That looks like very strange output.  Could you post the whole of both of
>> the
>> working and non-working ROM banner lines?
>>
>> Thanks,
>>
>
> Michael
>>
>
> Here are two screenshots, the good one is on fresh boot, the hang always
> happens if I allow Kernel to load and reboot.  If I do 'reboot' from grub,
> iPXE won't hang, the qemu-kvm instance *must* actually start the kernel
> before this happens.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20110211/e5ff6b5e/attachment.htm>