[ipxe-devel] Could not find hard disk in EFI mode

[Ali Shirvani]

Thanks Christian, I tried `exit` and `exit 1` both return to the UEFI menu
of my system.

On Sun, Jun 28, 2020 at 9:21 AM Christian Nilsson <nikize at gmail.com> wrote:

>
>
> On Sun, 28 Jun 2020, 13:35 Ali Shirvani, <aj.shirvani at gmail.com> wrote:
>
>> Hi all,
>> I created a bootable USB with ipxe.efi. I can boot my system in UEFI mode
>> and that USB stick, but when I try to sanboot from hard drive I got
>> following error:
>>
>> `Boot from SAN device 0x80 failed, no such device`
>>
>> Also I added some print statements to the `efi_block.c` and I found that
>> in `efi_block_boot` sandev_find could not find the device.
>>
>> But I can boot my system with `sanboot` when I use BIOS instead of UEFI.
>> Would you please help me to fix this?
>>
>> Regards,
>> Ali
>> _______________________________________________
>> ipxe-devel mailing list
>> ipxe-devel at lists.ipxe.org
>> https://lists.ipxe.org/mailman/listinfo/ipxe-devel
>
>
>
> Hi
> iPXE is made for booting over network, the hack to use sanboot to boot
> from disk is not something that you should take as "supported".
> Use exit instead, see the FAQ in the forum as well.
>
>
>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20200628/ffaedc9f/attachment.htm>