[ipxe-devel] Help: iPXE iSCSI boot for Windows 10 19H1

[Qing Zheng]

Really appreciate expert advice on this problem.

Regards,
Qing

From: Qing Zheng
Sent: Friday, August 2, 2019 10:22 AM
To: 'ipxe-devel at lists.ipxe.org' <ipxe-devel at lists.ipxe.org>
Subject: RE: Help: iPXE iSCSI boot for Windows 10 19H1

Sorry one correction. I did NOT have this problem with RS4 and RS5.

Thanks
Qing

From: Qing Zheng
Sent: Wednesday, July 31, 2019 2:48 PM
To: ipxe-devel at lists.ipxe.org<mailto:ipxe-devel at lists.ipxe.org>
Subject: Help: iPXE iSCSI boot for Windows 10 19H1

Hi,

  I use wimboot (UEFI mode) to install Windows10-19h1-18362 on an iSCSI disk. The installation was successful. However when Windows reboot itself after the installation. I get the following error message

" Your PC ran into a problem and needs to restart. We'll restart for you
  For more information about this issue and possible fixes, visit https://www.windows.com/stopcode

  If you call a support person, give them this info:
  Stop code: DRIVER IRQL NOT LESS OR EQUAL
  What failed: dump NDIS.SYS
"
After auto restart, you will get the same error message. I did have this problem with RS4. Will try RS5.

Any idea what might cause this problem and how to fix it?

Thanks in advance.
Qing

-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20190820/2590c61b/attachment.htm>