[ipxe-devel] Addendum [was Re: Dual BIOS and EFI boot ISO]

[Christian Nilsson]

Didn't Christian Hesse already point you to a possible patch to do
this?: https://github.com/ipxe/ipxe/pull/50

It is true that you will need 2 different ipxe binaries embeded into
the iso (one for pcbios and one for efi)
However the above patch does just that, with the gotcha that each of
the binaries must be built first (the build dependency does not yet
work for this build target)

On Sun, Jan 29, 2017 at 8:36 PM, Dean Westhead <dean at westhead.net> wrote:
> Hi James,
>
> Yes that is exactly what I am trying to do.
>
> I must admit that I have no idea how Centos (or the other distributions), do
> this.
>
> Dean.
>
> Sent from Nine
> ________________________________
> From: "James A. Peltier" <jpeltier at sfu.ca>
> Sent: 29 Jan 2017 18:28
> To: Dean Westhead
> Cc: Oliver Rath; ipxe-devel
> Subject: Re: [ipxe-devel] Addendum [was Re: Dual BIOS and EFI boot ISO]
>
> You are trying to create an ISO image that supports both BIOS and UEFI boot
> modes, similar to how a CentOS 7 ISO image is able to boot both.  This is
> not possible given how iPXE currently creates it's ISO images.  As far as I
> am aware, the ISOs to not contain relocatable code that can allow for a
> unified entry point for both platforms.  Perhaps I am wrong in this, but I
> don't see any way to do it currently.
>
> ----- On 29 Jan, 2017, at 01:18, Dean Westhead <dean at westhead.net> wrote:
>
> Hi Oliver,
>
> Thanks for that info.
>
>  have already done that part and the BIOS ISO and the EFI ISO works fine and
> boots and detects what system it is on etc.
>
> The problem I have is the part that in that forum that states :
>
> "But as far as the iPXE Binary goes, you need to go up one level to the DHCP
> server"
>
> The problem I have is that in our server environment, we dont use DHCP ...
> everything has a static IP.
>
> That is not a problem with iPXE .... I have an embeded script that when the
> ISO is booted it opens a console and asks the user for the IP, subnet mask,
> gateway and DNS server. It then uses this
> info to open the NIC, connect to the network and chain the menus etc from
> our central build server.
>
> This all works fine if I boot either the BIOS ISO or the EFI ISO and the
> servers build fine depending on which environment they are booted into.
>
> What I am now trying to do is not have two different ISO's .... one for BIOS
> and one for EFI.
>
> I would like to boot one ISO and that ISO will detect and run either the
> BIOS boot sequence or the EFI sequence. I basically need an ISO that will
> boot and do the function of the DHCP server by loading the correct iPXE
> binary for either
> BIOS or EFI.
>
> This may not be possible but so far I have not found anything that iPXE
> couldnt do !
>
> Thanks.
>
> Dean.
>
>
>
> ________________________________
> From: "Oliver Rath" <oliver at greenunit.de>
> To: "ipxe-devel" <ipxe-devel at lists.ipxe.org>
> Sent: Sunday, 29 January, 2017 07:12:51
> Subject: [ipxe-devel] Addendum [was Re:  Dual BIOS and EFI boot ISO]
>
> Hi Dean,
>
> you can also use the DHCP Client Architecture option (code 93) will indicate
> the client architecture as specified by RFC 4578, see the NOTES here:
> http://www.ipxe.org/cfg/platform
>
> Hth,
>
> Oliver
>
>
> On 28.01.2017 20:32, Dean Westhead wrote:
>
> Hi,
>
> I am able to create an iPXE BIOS bootable iso and a iPXE EFI bootable ISO
> ... is there a way to create one ISO that will boot on both environments and
> detect which one needs booting ?
>
> I know that the major linux distributions do this with their build media but
> is this possible with the iPXE ?
>
> Thanks.
>
> Dean.
>
>
>
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>
>
>
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>
>
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>
>
> --
> James A. Peltier
> IT Services - Research Computing Group
> Simon Fraser University - Burnaby Campus
> Phone   : 604-365-6432
> Fax     : 778-782-3045
> E-Mail  : jpeltier at sfu.ca
> Website : http://www.sfu.ca/itservices
> Twitter : @sfu_rcg
> Powering Engagement Through Technology
>
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>