[ipxe-devel] DHCP failures - HP R1

[Arun SAG]

Hi, (+ipxe-devel)

Thanks for getting back.

On Wed, Jan 18, 2017 at 4:10 PM, Christian Nilsson <nikize at gmail.com> wrote:

> >Your nic does not receive any packets at all, or rather the ipxe UNDI
> >interface does not see any packets.
> >There have been some undi related fixes since the version you are
> >using https://git.ipxe.org/ipxe.git/commit/fd95c so you could try to
> > update your build and try again.
>

We updated the IPXE to the latest. (git#26050fd) Still i am seeing the same
issue.

> You might also want to try to use ipxe.pxe instead of undionly.kpxe if
> > there is native drivers for your nic available in ipxe that is. (I'm
> > assuming you are using undionly.kpxe based on the output)
> > What is the actual NIC model you are using, and what ROM provides the
> > UNDI interface for that NIC?
>
>
I will try using ipxe.pxe. Is there a list of hardware/network interface
cards supported by ipxe.pxe?
We have variety of hardware and interface cards, i don't think ipxe.pxe is
gonna work on all. But it is
worth a shot.

The NIC model is:   eth1 (igb): Intel I350 Gigabit, 1Gb/s <full-duplex>
The hardware model is:  http://h20564.www2.hpe.com/hp
sc/swd/public/readIndex?sp4ts.oid=7812743
(We do see a BIOS update available for this model. - Will it help to update
the BIOS? )
firmware-version: 1.52.0



-- 
Arun S A G
http://zer0c00l.in/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20170118/3f32026f/attachment.htm>