[ipxe-devel] TFTP upload

[Martin Habets]

Sort of depends how much data needs saving and the format it is in.
I use syslog (port 514) output to capture output of test scripts and sometimes debug info. This is normally limited to plain ASCII text.

syslog can be enabled in the ISC DHCP server using
  option log-servers <ip>
in dhcpd.conf.

Martin

On 29/11/17 15:22, Alex Vaserfirer wrote:
> Hi,
> 
> One of our vendors, a software developer has opinion that there is no “write file” implementation in ipxe. And this is why the application developed by the vendor is not able to safe test reports to network using TFTP protocol.
> 
> If this is the case, can you please suggest a possible solution?
> 
> Thank you.
> 
> 
> 
> Alex Vaserfirer
> /Principal Engineer/
> office: 1 (972) 633-3409
> Alex.Vaserfirer at unicomengineering.com <mailto:Alex.Vaserfirer at unicomengineering.com>
> 
>   <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.unicomengineering.com_&d=DwMFAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=bDlNVsDKWqgsXKsUqLzxzrHgU4goVVoc1iZd-NYisK0&m=6D2qvYs99xw_gNmurw9M2Tj2mtvytTe-MfFAHSvLU88&s=qsCdk6MecE_Q81qE6fO3S-XbfQA67k0dIr4nJAVNMsU&e=><https://urldefense.proofpoint.com/v2/url?u=http-3A__www.unicomengineering.com_&d=DwMFAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=bDlNVsDKWqgsXKsUqLzxzrHgU4goVVoc1iZd-NYisK0&m=6D2qvYs99xw_gNmurw9M2Tj2mtvytTe-MfFAHSvLU88&s=qsCdk6MecE_Q81qE6fO3S-XbfQA67k0dIr4nJAVNMsU&e=>
> 
> 
> 
> **********************************************************************
> This message (including any attachments) contains confidential information that is PRIVILEGED, CONFIDENTIAL and/or ATTORNEY WORK PRODUCT and is intended only for the individual(s) named herein. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this message in error, please notify the UNICOM Engineering, Inc. Postmaster (postmaster at unicomengineering.com <mailto:postmaster at unicomengineering.com>) of the error immediately, do not read or use the email and any attachments in any manner, destroy all copies, and delete it from your system if the communication was sent via email. UNICOM Engineering, Inc., (781) 332-1000 Fax: (781) 770-2000
> **********************************************************************
> 
> 
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>