[ipxe-devel] blank screen, then back to grub. What to do next?

[Christian Nilsson]

Hi,
Always start with using the absolute latest ipxe git master, you can find a
prbuilt image at http://boot.ipxe.org
Check that the ipxe version works with other boot methods, that means using
ipxe.usb on a usb stick or ipxe.pxe chained over the network.

/Christian

On Fri, Oct 7, 2016 at 5:38 AM, Ian Kelling <ian at iankelling.org> wrote:

> Wondering how I would go about debugging this?
>
> Ipxe version is from debian package 1.0.0+git-20150424.a25a16d-1,
> the relevenat grub2 command to load ipxe is this:
> linux16 /boot_debiantesting/ipxe.lkrn
>
> The screen goes black for a few seconds, then goes back to grub.
> This is on an x200 laptop with libreboot bios.
> The ethernet card is intel 8086:10f5, listed on the expected to work
> page.
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20161007/b4a71f1f/attachment.htm>