[ipxe-devel] Ipxe boot

[James A. Peltier]

----- Original Message -----
| I wanted to pick someone's brain on this issue. I'm new to ipxe and had to
| set up a ipxe server, I am running into an issue with getting the image on
| to a physical machine. I initially thought it was a driver issue but I found
| my nic card (Intel wg82567lm) in the list of supported cards. I drawing a
| blank as to what to check in my configuration. The error I get on the
| physical machine is 0x040ee119, I'm using server 2008 r2, dhcp service
| running, wds, and iis. And like I mentioned  if I start a vm virtual box and
| set it to pxe it picks up the configurations with no problem? Is there
| something I should be look at more closely.

some cards take a bit longer to initialize than others.  Some switches, same thing.  I just do a dhcp || retry and that often gets around the issue.

-- 
James A. Peltier
IT Services - Research Computing Group
Simon Fraser University - Burnaby Campus
Phone   : 604-365-6432
Fax     : 778-782-3045
E-Mail  : jpeltier at sfu.ca
Website : http://www.sfu.ca/itservices
Twitter : @sfu_rcg
Powering Engagement Through Technology