[ipxe-devel] Problem loading Windows 7 on ISCSI (bootmgr damaged or not present)

[ruben at cmg.jovenclub.cu]

Hi good morning I need help from a specialist in this motherboard, it is 
I'm setting up a network of thin clients in any way windows 7 can boot 
the operating system over the network using iSCSI always gives the same 
bootmgr corrupted or low memory errors. In country bought multiple 
computers with these characteristics and all are the same problem. I 
thought about writing the PXE ROM in the EEPROM of the network card but 
I think with that does not fix the problem. sometimes I received the 
bootmgr is not loaded for that memory is very low and hence does not 
happen in any of the variants I've tried, I've tried with Ardence and 
ccboot but all failed, however with a hard disk connected the operating 
system starts the network works perfectly and everything goes well, do 
not understand what may be happening when I try to boot from the network 
if ISCSI apparently is the same process, I need help here are the model 
of my motherboard in advance thank you very much.

Motherboard: PEGATRON CORPORATION BYT-X1
Bios: American Megatrends Inc
P014AP0
07/23/2014

Ethernet controller
Model: "Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller"
________________________________________________________________________
V Simposio Internacional de comunidad, entretenimiento y redes sociales, 
del 14 al 18 de marzo de 2016 en el Palacio de Convenciones de La Habana.
http://www.informaticahabana.cu/es/eventos/show/100