[ipxe-devel] Boot in IPv6

Oliver Rath oliver at greenunit.de
Tue Sep 9 09:25:51 BST 2014


Hi Wissam,

there is no official standard yet for pxe-booting over IPv6. So you have
to look into your Bios for IPv6-pxe-availability and configure it for
loading a i.e. undionly.kpxe-file via IPv6 over tftp.

Then you can proceed with ipxe in the new IPv6-way.

If your network cards supports flashing an ipxe-binary, you can try
generating a bootrom for your card.

Hth,
Oliver


Am 09.09.2014 um 10:18 schrieb Wissam Shoukair:
> Hi all,
> 
> I’m new to the IPv6 interface in iPXE. How I can boot only over IPv6 ?
> 
>  
> 
> Thanks,
> 
> Wissam Shoukair
> 
> 
> 
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
> 


-- 
GreenUnit.UG
Agnes-Pockels-Bogen 1
D - 80992 München
Tel.: +49 89 8905729-15
Fax:  +49 89 8905729-29
mailto:oliver.rath at greenunit.de

Geschäftsführer: Dipl.-Ing. Günter Rath
Amtsgericht München, HRB 187881
Internet: www.greenunit.de


More information about the ipxe-devel mailing list