[ipxe-devel] no dhcp after reboot

[Robin Smidsrød]

On 03.03.2014 02:43, Oliver Rath wrote:
> Hi list,
> 
> i have some strange effects: If i execute a ipxe-script in the following
> way:
> 
> 1. chainload ipxe-image+script (usb-stick)
> 2. chainload ipxe-srcipt over net (with --autofree --replace)
> 3. loading linux / initrd-image + boot
> 4. reboot with ctrl+alt+delete (warm reboot)
> 
> then ipxe-dhcp wont get an ip-address (error 0x040ee119)
> 
> After unplug drain supply i get an ip again.
> 
> It is possible the is still some pollution from the old script?

This is usually a problem with the reset code of the driver in question.
You shouldn't by any chance be using a realtek on that hardware? Had a
similar report on IRC today and something on the forum some days ago:
http://forum.ipxe.org/showthread.php?tid=7216

Follow the debug instructions mcb30 gave on the forum and see what it
says about the PHY status and the other info.

-- Robin