[ipxe-devel] pxe - ipxe compatibility issue

[Daniel Braniss]

hi,
is there something else I can do to track down the problem?
thanks,
	danny

On Jun 21, 2014, at 2:37 PM, Daniel Braniss <danny at cs.huji.ac.il> wrote:

> 
> On Jun 21, 2014, at 1:38 PM, Michael Brown <mcb30 at ipxe.org> wrote:
> 
>> On 21/06/14 09:18, Daniel Braniss wrote:
>>> the error I get is:
>>> 	ipxe.org/063760
>> 
>> That error indicates that the packet could not be sent immediately because the destination has not yet been resolved via ARP.  As long as you keep polling (via PXENV_UDP_READ), the packet will get transmitted as soon as the ARP reply arrives.
> 
> it tries for over 2 minutes with no response since the write fails.
> 
> no arp request is going out!, I’m sniffing the net. just a reminder, the link is good, undionly gets loaded via tftp,
> the ipxe script as well, dhcp request/acks too.
> 
>>> since this host has 2 NICS, one onboard - realtek, and one PCI Intel - and this is the one I using,
>>> I decided to try the onboard, and in this case undionly hangs! even if I remove the intel card.
>>> 
>>> the real problem is on a SBC from PCEngines that has 3 realteks on board and have the same problem.
>> 
>> That sounds like a totally unrelated problem.
> same here, it was a wild guess, that maybe it was trying that interface. it’s now disabled by the bios.
> 
>> 
>> Michael
>