[ipxe-devel] Issues with some Network Cards

[sujan karanjeet]

Hello Everyone,

I've been having issues booting up with some network controllers like
Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller (10/100/1000MBit).
The system finds the DHCP IP address and gets into iPXE but it gets stuck
while trying to get the link up (net0). Could someone please help me with
this.


This is what I see when booting:

iPXE initialising devices...ok
>
> iPXE 1.0.0+ (e0478) -- Open Source Network Boot Firmware --
> http://ipxe.org
> Features: HTTP iSCSI DNS TFTP AoE SRP bzImage ELF MBOOT PXE PXEXT Menu
>
> net 0 :00:17:42:c8:0c:8c:8e using m88e8055 on PCI00:00.0 (open)
> [Link: down, TX:0 TXE:0 RX:0 RXE:0]
> [Link status: Down (http:/ipxe.org/38086101)]
> Waiting for link-up on net0.............. --- Gets stuck here ---
>


Thanks in advance,
Sujan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20140728/7ffc3a6d/attachment.htm>