[ipxe-devel] [Etherboot-discuss] Error while generating rom image from rom-o-matic.net

[xbgmsharp]

Hi all,

http://rom-o-matic.net is out of date and not maintain.
It was use to build gPXE.

You need to use http://rom-o-matic.eu to generate iPXE.
The NBI support can be enable directly from the rom-o-matic.eu

Please use iPXE and not gPXE.

Francois

On 2014-07-01 14:46, Michael Brown wrote:
> On 01/07/14 13:06, Vinod Nadiadwala wrote:
>> thank you for the reply, but i am using other pc's in networking 
>> having
>> etherboot cards, and i am booting clients using thinstation .nbi 
>> image,
>> now i want to add more pc's which is having onboard lan, i am want 
>> burn
>> flash and replace .pxe boot loader in bios with the etherboot for 
>> vendor
>> id : 0x10ec, 0x8168
>> 
>> Please guide what can be done in this case.
>> 
>> Note: I have downloaded etherboot images from rom-o-matic.net
>> <http://rom-o-matic.net> around 1 month before without any error, but 
>> i
>> have lost the image from my hdd, please fix error on the etherboot 
>> site
>> if possible as i don't have experience with gpxe and ipxe etc..
> 
> You could downgrade your entire system to a seven-year-old distro; you
> would probably then be able to compile the seven-year-old code.
> 
> If you build iPXE with NBI support enabled (which is off by default),
> then you should be able to boot your existing thinstation images.
> Other people may be prepared to help you use obsolete code; I'm afraid
> my only advice is going to be to use the existing code in which the
> problems you are experiencing have already been fixed.
> 
> Michael
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel