[ipxe-devel] [External] FW: [PATCH] [intel] Add Intel I210 Gigabit Ethernet PCI ID

[Robin Smidsrød]

Compile with DEBUG=intel and report which of the tests at
http://ipxe.org/dev/driver fail (with the PCI_ROM line in place).
Accompanying screenshots of the red debug text output would be most
useful in tracking things down, as it shows the register state when
things go wrong. If you have a serial cable you can of course use that
instead of taking a photo.

-- Robin

On 04.02.2014 00:47, Post, Donald L UTAS wrote:
> Also MAC address being reported for the three devices is bogus. If I boot linux, I can view the mac addresses and they are what I expect (correct first 3 hex digits for vendor, etc..). ifconf reports the same MAC address for all three and it does not have the right vendor OUI..  The driver is working somewhat in that the link state is reported correctly. If I unplug the link and ifconf the link is reported as down. Plugged in and it is reported as up.
> 
> Any help is greatly appreciated...
> 
> -Don
> 
> -----Original Message-----
> From: ipxe-devel-bounces at ipxe.org [mailto:ipxe-devel-bounces at ipxe.org] On Behalf Of Post, Donald L UTAS
> Sent: Monday, February 03, 2014 6:39 PM
> To: ipxe-devel at ipxe.org
> Subject: [External] [ipxe-devel] FW: [PATCH] [intel] Add Intel I210 Gigabit Ethernet PCI ID
> 
> Hi,
> 
> We just upgraded to a new version of our SBC and it has 3 of the Intel i210 devices and they were not being recognized. The device number was different than the one mentioned in this patch. My i210 device is 0x8086,0x157b. I added this device id to the list in intel.c. 
> 
> PCI_ROM ( 0x8086, 0x157b, "i210-x", "I210 x",  0 ),
> 
>  ifconf now detects the devices, but reports a configuration error of 0x040ee119. 
> 
> Configuring (net0 xx:xx:xx:xx:xx:xx)............................ Error 0x040ee119
> 
> I was wondering if anyone has tried using an i210 with this device id and if so what changes may be necessary.  I pulled my snapshot via git at 11am this morning.
> 
> Thanks!
> 
> -Don
> 
> -----Original Message-----
> From: ipxe-devel-bounces at ipxe.org [mailto:ipxe-devel-bounces at ipxe.org] On Behalf Of Jens Rottmann
> Sent: Wednesday, February 06, 2013 8:25 AM
> To: ipxe-devel at ipxe.org
> Subject: [ipxe-devel] [PATCH] [intel] Add Intel I210 Gigabit Ethernet PCI ID
> 
> [intel] Add Intel I210 Gigabit Ethernet PCI ID
> 
> Managed to net-boot without further changes, obviously chip is similar enough to its predecessors.
> 
> Signed-off-by: Jens Rottmann <JRottmann at LiPPERTembedded.de>
> ---
> 
> --- ipxe-b757df7/src/drivers/net/intel.c
> +++ ipxe/src/drivers/net/intel.c
> @@ -945,6 +945,7 @@
>  	PCI_ROM ( 0x8086, 0x1525, "82567v-4", "82567V-4", 0 ),
>  	PCI_ROM ( 0x8086, 0x1526, "82576-5", "82576", 0 ),
>  	PCI_ROM ( 0x8086, 0x1527, "82580-f2", "82580 Fiber", 0 ),
> +	PCI_ROM ( 0x8086, 0x1533, "i210", "I210", 0 ),
>  	PCI_ROM ( 0x8086, 0x294c, "82566dc-2", "82566DC-2", 0 ),
>  	PCI_ROM ( 0x8086, 0x2e6e, "cemedia", "CE Media Processor", 0 ),  }; _
> 
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>