[ipxe-devel] some problem when initial devices in ipxe.efi

Yixuan Huang yixuan178 at gmail.com
Mon Jul 15 05:15:23 UTC 2013


Hello Jarron,
I have tested today with your patch, and build snponly.efi, but it seems
not recognized my nics.
>>>
xCAT Network Boot Agent
iPXE 1.0.3-130715(f411d) -- Open source ..
Features: HTTP HTTPS iSCSI DNS TFTP EFI
No more network devices
xNBA initialising devices... ok



Thanks,
yixuan


On Fri, Jul 12, 2013 at 7:33 AM, Jarrod Johnson
<jarrod.b.johnson at gmail.com>wrote:

> Meant to post to list.  In short, snponly.efi can be chainloaded from a
> PXE boot in UEFI as an application (
> https://git.ipxe.org/vendor/xcat/ipxe.git/shortlog)  It has a patch not
> yet accepted into ipxe main.
>
> However, you mentioned going from .iso.  That needs an extra step.  Either
> an intermediate loader to switch around the loaded image handle prior to
> execution, or a patch to ipxe shoring up it's support for non-IPXE SNP
> drivers to go beyond loaded image.  I had been hoping to get to the latter,
> but a combination of not having enough time or intelligence has gotten in
> the way.
>
>
> On Thu, Jul 11, 2013 at 1:36 AM, Yixuan Huang <yixuan178 at gmail.com> wrote:
>
>> Oh, don't notice to list. :-)
>> Thanks Robin
>>
>> Hello Guys,
>> If I want to use ipxe in EFI mode, any easy way to built one? Now, I have
>> ipxe.efi, snponly,efi, snpnet.efi, 80861521.efi, (my nic is intel e1000,
>> 8086/1521),  but it cannot detect that NIC.
>> Robin said we can use as EFI driver, Iwant to know how to execute it. Any
>> documentation?
>>
>> Thanks,
>> yixuan
>>
>>
>> On Wed, Jul 10, 2013 at 9:38 PM, Robin Smidsrød <robin at smidsrod.no>wrote:
>>
>>> I don't know. Please keep the conversation on the list, not in private.
>>>
>>> Most likely some of the other people on the list can answer that. I also
>>> believe it's been answered before. Don't remember when. Check the
>>> mailing-list archives.
>>>
>>> -- Robin
>>>
>>> On 10.07.2013 12:22, Yixuan Huang wrote:
>>> > hello Robin,
>>> > Thanks for your information.
>>> > But if I want to launch from uefi shell, how can I do? Any
>>> documentation
>>> > in ipxe.org <http://ipxe.org>?
>>> > And do you know if ipxe support as app in the furture?
>>> >
>>> > Thanks,
>>> > Eugene
>>> >
>>> > Thanks,
>>> > yixuan
>>>
>>> >
>>> >
>>> > On Wed, Jul 10, 2013 at 5:34 PM, Robin Smidsrød <robin at smidsrod.no
>>> > <mailto:robin at smidsrod.no>> wrote:
>>> >
>>> >     iPXE as an UEFI app doesn't yet work. You'll need to load it as a
>>> driver
>>> >     or rom, AFAIK.
>>> >
>>> >     -- Robin
>>> >
>>> >     On 10.07.2013 09 <tel:10.07.2013%2009>:56, Yixuan Huang wrote:
>>> >     > when I used snponly.efi, (make bin-x86-64/snponly.efi) same
>>> issue.
>>> >     >
>>> >     > Thanks,
>>> >     > yixuan
>>> >     >
>>> >     >
>>> >     > On Wed, Jul 10, 2013 at 3:27 PM, Yixuan Huang <
>>> yixuan178 at gmail.com
>>> >     <mailto:yixuan178 at gmail.com>
>>> >     > <mailto:yixuan178 at gmail.com <mailto:yixuan178 at gmail.com>>>
>>> wrote:
>>> >     >
>>> >     >     Hello,
>>> >     >     I built ipxe.efi in my rhel6.4 platform with git clone that
>>> latest
>>> >     >     code level.
>>> >     >     And I enable ftp/https protocols.
>>> >     >
>>> >     >     my system is ibm x3650m4, last time when i used pre-build
>>> binary
>>> >     >     ipxe.iso,
>>> >     >     network cards can be set and http can work.
>>> >     >
>>> >     >     But this time, it seems no nic worked. i first boot from
>>> >     uefi-shell,
>>> >     >     then run ipxe.efi.
>>> >     >
>>> >     >     screen like following:
>>> >     >     ipxe 1.0.0+(9361) ...
>>> >     >     Features: FTP HTTP HTTPS DNS TFTP EFI Menu
>>> >     >     No more network devices
>>> >     >     iPXE initialsing device...
>>> >     >
>>> >     >     it will hang...
>>> >     >
>>> >     >     question:
>>> >     >     * how can i build other nic drivers or which one can support
>>> >     all nics?
>>> >     >
>>> >     >
>>> >     >     Thanks,
>>> >     >     yixuan
>>> >     >
>>> >     >
>>> >     >
>>> >     >
>>> >     > _______________________________________________
>>> >     > ipxe-devel mailing list
>>> >     > ipxe-devel at lists.ipxe.org <mailto:ipxe-devel at lists.ipxe.org>
>>>
>>> >     > https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>>> >     >
>>> >
>>> >     _______________________________________________
>>> >     ipxe-devel mailing list
>>> >     ipxe-devel at lists.ipxe.org <mailto:ipxe-devel at lists.ipxe.org>
>>> >     https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>>> >
>>> >
>>>
>>>
>>
>> _______________________________________________
>> ipxe-devel mailing list
>> ipxe-devel at lists.ipxe.org
>> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20130715/8ff48b3c/attachment.htm>


More information about the ipxe-devel mailing list