[ipxe-devel] Newbie question on making Intel NIC rom 8086:105E

[Calvin Chen]

Hi,

I am trying to make a rom for Intel PRO/1000 PT with 8086:105E and failed.
Is there any specific parameter with Intel NIC?

Attached the build error message. Thank you
Build failed. Status = 2build.php:Build options:*Build directory
is:*/tmp/MDCROM966kbV

$_POST['ofmt'] = "ROM binary (flashable) image (.rom)"
$_POST['nic'] = "all-drivers"
$_POST['pci_vendor_code'] = "8086"
$_POST['pci_device_code'] = "105E"
Flags:$flags contains 45 elements:
$flags[PRODUCT_NAME]=""
$flags[PRODUCT_SHORT_NAME]="iPXE"
$flags[CONSOLE_PCBIOS]="on"
$flags[CONSOLE_SERIAL]="off"
$flags[BANNER_TIMEOUT]="20"
$flags[KEYBOARD_MAP]="us"
$flags[LOG_LEVEL]="LOG_NONE"
$flags[NET_PROTO_IPV4]="on"
$flags[COMCONSOLE]="0x3F8"
$flags[COMPRESERVE]="off"
$flags[COMSPEED]="115200"
$flags[COMDATA]="8"
$flags[COMPARITY]="0"
$flags[COMSTOP]="1"
$flags[DOWNLOAD_PROTO_TFTP]="on"
$flags[DOWNLOAD_PROTO_HTTP]="on"
$flags[DOWNLOAD_PROTO_HTTPS]="off"
$flags[DOWNLOAD_PROTO_FTP]="off"
$flags[SANBOOT_PROTO_ISCSI]="on"
$flags[SANBOOT_PROTO_AOE]="on"
$flags[DNS_RESOLVER]="on"
$flags[NMB_RESOLVER]="off"
$flags[IMAGE_ELF]="on"
$flags[IMAGE_NBI]="on"
$flags[IMAGE_MULTIBOOT]="on"
$flags[IMAGE_PXE]="on"
$flags[IMAGE_SCRIPT]="on"
$flags[IMAGE_BZIMAGE]="on"
$flags[IMAGE_COMBOOT]="on"
$flags[AUTOBOOT_CMD]="on"
$flags[NVO_CMD]="on"
$flags[CONFIG_CMD]="on"
$flags[IFMGMT_CMD]="on"
$flags[IWMGMT_CMD]="on"
$flags[ROUTE_CMD]="on"
$flags[IMAGE_CMD]="on"
$flags[DHCP_CMD]="on"
$flags[SANBOOT_CMD]="on"
$flags[LOGIN_CMD]="on"
$flags[TIME_CMD]="off"
$flags[DIGEST_CMD]="off"
$flags[CRYPTO_80211_WEP]="on"
$flags[CRYPTO_80211_WPA]="on"
$flags[CRYPTO_80211_WPA2]="on"
$flags[NETDEV_DISCARD_RATE]="0"
Make output:Make command: make -C '/tmp/MDCROM966kbV' 'bin/8086105e.rom'
GITVERSION=bf15 2>&1

make: Entering directory `/tmp/MDCROM966kbV'
  [DEPS] arch/i386/prefix/romprefix.S
  [DEPS] arch/i386/prefix/mromprefix.S
  [DEPS] arch/x86/core/debugcon.c
  [DEPS] arch/i386/interface/vmware/vmconsole.c
  [DEPS] arch/i386/interface/syslinux/comboot_call.c
  [DEPS] arch/i386/interface/pcbios/vesafb.c
  [DEPS] arch/i386/interface/pcbios/bios_smbios.c
  [DEPS] arch/i386/firmware/pcbios/bios_console.c
  [DEPS] arch/i386/core/video_subr.c
  [DEPS] config/config_route.c
  [DEPS] config/config_romprefix.c
  [DEPS] config/config_net80211.c
  [DEPS] config/config_infiniband.c
  [DEPS] config/config_fc.c
  [DEPS] config/config_ethernet.c
  [DEPS] config/config.c
  [DEPS] usr/imgtrust.c
  [DEPS] usr/autoboot.c
  [DEPS] interface/smbios/smbios_settings.c
  [DEPS] interface/smbios/smbios.c
  [DEPS] interface/efi/efi_snp_hii.c
  [DEPS] interface/efi/efi_snp.c
  [DEPS] interface/efi/efi_smbios.c
  [DEPS] interface/efi/efi_driver.c
  [DEPS] interface/efi/efi_console.c
  [DEPS] net/udp/syslog.c
  [DEPS] net/tcp/syslogs.c
  [DEPS] net/tcp/oncrpc.c
  [DEPS] net/netdevice.c
  [DEPS] core/serial_console.c
  [DEPS] core/serial.c
  [DEPS] core/main.c
  [DEPS] core/log.c
  [DEPS] core/image.c
  [DEPS] core/downloader.c
make: Leaving directory `/tmp/MDCROM966kbV'
make: Entering directory `/tmp/MDCROM966kbV'
  [BUILD] bin/downloader.o
  [BUILD] bin/image.o
  [BUILD] bin/log.o
  [BUILD] bin/main.o
  [BUILD] bin/serial.o
  [BUILD] bin/serial_console.o
make: *** No rule to make target `../.git/index', needed by
`bin/version.o'.  Stop.
make: Leaving directory `/tmp/MDCROM966kbV'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20140101/a628f6a8/attachment.htm>