[ipxe-devel] SOLVED [was: Win8 reboot fails after sysprep]

Oliver Rath rath at mglug.de
Fri Aug 16 15:25:46 UTC 2013


Hi list,

it seemss to be in fact a hardware (driver?) problem: I changed to Intel
NICs (in our case Intel 1000 GT) and all works fine incl. sysprep.

Oliver


Am 16.08.2013 03:48, schrieb Oliver Rath:
> Hi list,
> 
> i work here with win8, which is created on an iscsi-volume (lio-target).
> The installation runs fine. Now i wantet to clone this to a similar pc,
> so ich sysprepped it and restarted for test on the same pc.
> 
> ipxe starts well, win8 _starts_ well, but after a few seconds it hangs,
> then it reboots with a failure "inacessible boot device"
> 
> wireshark logged as last action an iscsi-command, followed by an "nop
> in", repeated several times.
> 
> Has anybody experience with sysprepping on an iscsi-device? In the net
> there are no experienes found.
> 
> btw, first i had the same issue like hech with the zeroed mac-address,
> but this was able to be solved by new nics.
> 
> Im using undionly.kkpxe with poweroff and reboot enabled.
> 
> Any experience here with sysprepping on a iscsi-target?
> 
> Tfh!
> 
> Oliver
> 
> 
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
> 




More information about the ipxe-devel mailing list