[ipxe-devel] New to SAN booting - need help debugging

[Michael]

 Hello,

I am trying to set up my first iscsi bootable machine.  I am attempting
with both Fedora 16 and 17.

I set up the iscsi target following these instructions here:

http://www.server-world.info/en/note?os=Fedora_17&p=iscsi

The installation of Fedora seems to go well, it can see the iscsi disk,
installs to it without issue, etc.

Upon reboot, the machine fails to boot.  I think I am running into an issue
with iPXE, but I am not 100% sure.


Here is the output of tgtadm
tgtadm --mode target --op show
Target 1: iqn.2012-09.net.blandford:target00
    System information:
        Driver: iscsi
        State: ready
    I_T nexus information:
        I_T nexus: 12
            Initiator: iqn.2012-09.net.blandford:target00
            Connection: 0
                IP Address: 192.168.1.19
    LUN information:
        LUN: 0
            Type: controller
            SCSI ID: IET     00010000
            SCSI SN: beaf10
            Size: 0 MB, Block size: 1
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            Backing store type: null
            Backing store path: None
            Backing store flags:
        LUN: 1
            Type: disk
            SCSI ID: IET     00010001
            SCSI SN: beaf11
            Size: 16106 MB, Block size: 512
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            Backing store type: rdwr
            Backing store path: /dev/mapper/iscsi-Test
            Backing store flags:
    Account information:
    ACL information:
        192.168.1.19

Attached is ipxe when it fails to attach to the disk.

I am not sure how to proceed.  Any suggestions?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20120902/3e5bb045/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ipxe.png
Type: image/png
Size: 13360 bytes
Desc: not available
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20120902/3e5bb045/attachment.png>