[ipxe-devel] BMC 57765 on an iMac12,2

[Jeison S.]

The DHCP request only appears in the syslog after step 3 when I do the
following:
1. Boot the client machine into ipxe,
2. issue the dhcp command,
3. restart the client machine

When I boot back into ipxe, the (seemingly endless) DHCP messages stop
appearing in syslog.

Debug info:
Waiting for link-up on net0... Link is up at 1000 Mbps. full duplex
Flow control is on for TX and on for RX
EEE is disabled

syslog:
Feb 15 11:23:02 sandy dhcpd: DHCPDISCOVER from 3c:07:54:04:d2:fd via eth0
Feb 15 11:23:02 sandy dhcpd: DHCPOFFER on 192.168.101.10 to
3c:07:54:04:d2:fd via eth0
Feb 15 11:23:03 sandy dhcpd: DHCPREQUEST for 192.168.101.10
(192.168.101.254) from 3c:07:54:04:d2:fd via eth0
Feb 15 11:23:03 sandy dhcpd: DHCPACK on 192.168.101.10 to 3c:07:54:04:d2:fd
via eth0
Feb 15 11:23:03 sandy dhcpd: DHCPINFORM from 192.168.101.10 via eth0
Feb 15 11:23:03 sandy dhcpd: DHCPACK to 192.168.101.10 (3c:07:54:04:d2:fd)
via eth0
Feb 15 11:23:04 sandy dhcpd: DHCPINFORM from 192.168.101.10 via eth0
Feb 15 11:23:04 sandy dhcpd: DHCPACK to 192.168.101.10 (3c:07:54:04:d2:fd)
via eth0
Feb 15 11:23:05 sandy dhcpd: DHCPINFORM from 192.168.101.10 via eth0
Feb 15 11:23:05 sandy dhcpd: DHCPACK to 192.168.101.10 (3c:07:54:04:d2:fd)
via eth0
...
Feb 15 11:23:17 sandy dhcpd: DHCPINFORM from 192.168.101.10 via eth0
Feb 15 11:23:17 sandy dhcpd: DHCPACK to 192.168.101.10 (3c:07:54:04:d2:fd)
via eth0
Feb 15 11:23:18 sandy dhcpd: DHCPINFORM from 192.168.101.10 via eth0
Feb 15 11:23:18 sandy dhcpd: DHCPACK to 192.168.101.10 (3c:07:54:04:d2:fd)
via eth0


Jeison


On Wed, Feb 15, 2012 at 07:48, Michael Brown <mbrown at fensystems.co.uk>wrote:

> On Tuesday 14 Feb 2012 22:10:46 Jeison S. wrote:
> > Thanks for the new drivers. I'm not able to get a dhcp address for
> > BMC57765. iPXE detects the card and I'm able to manually assign an IP
> > address but I can't ping it from the server.
> >
> > When I run ifstat it shows:
> > net0: <mac address> using 14e4-16b4 on PCI02:00.0 (open)
> >   [Link:up, TX:8 TXE:0  RX:0 RXE:0]
> >
> > (Note that I ran the dhcp command 3 times)
> >
> > Is there any information I can supply to help troubleshoot?
>
> According to ifstat, you're never receiving any packets.
>
> Does the server see the DHCP request packets sent by the client?
>
> You could try building with DEBUG=tg3,tg3_hw,tg3_phy
>
> Michael
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20120215/b186ea46/attachment.htm>