[ipxe-devel] HP ML350 G6 support

[Divya]

Thanks John for the response. By enabling the PXE ROM, do you mean to enable
tg3 NIC for PXE boot in BIOS? I have enabled it ( i am able to do gpxe boot
on this), but stil. Also how do you find out the what Netboot agent version
the card has?? ( during gpxe boot, it says HP UNDI PXE-2.1  v10.4.6 -> is
this the netboot agent version? )

Thanks & Regards,
Divya

On Tue, Sep 20, 2011 at 8:12 PM, John Julien <john at julienfamily.com> wrote:

> Neither of these cards have a native driver for iPXE.  There is a tg3 and
> bnx2 driver but they don't support these cards.   Your best bet is to enable
> the PXE ROM on the 14e4:1678 card and let iPXE use the UNDI driver provided
> by Broadcom.   If the bnx2 card has Netboot Agent 6.0.11, which it probably
> will, you will not be able to use the UNDI driver on that card as it is also
> incompatible with iPXE.
>
>
>
> On Sep 20, 2011, at 8:17 PM, Divya wrote:
>
> Hi,
>   I am trying to boot from ipxe iso image on HP ML 350 G6 server. I can go to the cmd line. "ifstat" does not list any n/w interfaces. On exit from shell ipxe reports "No more network devices".
>
>
> The server has onboard tg3 NICS ( 14e4: 1678 ). Tried with bnx2 add on card (14e4: 1639), this doesn't work too. Am I missing anything?
>
> Thanks & Regards,
> Divya
>
>
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo/ipxe-devel
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20110921/73cc180d/attachment.htm>