[ipxe-devel] Create rom image with embedded script [SEC=UNCLASSIFIED]

[Andrew Dwyer]

Dwyer, Andrew <Andrew.Dwyer at ...> writes:
> I'm hitting ctrl+b at the first prompt because that's the only one I
> get.  After that the screen goes blank and then the devices in the boot
> order attempt to boot.
> 
> I'm doing this on a HP Z400 which has a HP branded BIOS.  The network
> card definitely appears in the boot order selection with the stock Intel
> pxe rom, but when I replace it with iPXE it disappears.
> 
> The BIOS detection line:
> 
> iPXE (http://ipxe.org) 37:09.0 1000 PCI3.00 PnP PMM+004D1200+004E1EF0
> D740

Does anyone have any suggestions for me on this issue?  I'm still having the
same problem of iPXE on my network card not showing up as a bootable device.

Thanks

Andrew