[ipxe-devel] [PATCH] [igbvf] Add igbvf driver
Alex Williamson
alex.williamson at redhat.com
Fri Dec 10 20:57:21 UTC 2010
Driver for Intel 82576 based virtual functions, based on Intel source
code available at:
http://sourceforge.net/projects/e1000 (igbvf-1.0.7)
Based on initial port from Eric Keller <ekeller at princeton.edu>.
Signed-off-by: Alex Williamson <alex.williamson at redhat.com>
---
src/Makefile | 1
src/drivers/net/igbvf/Makefile | 36 +
src/drivers/net/igbvf/igbvf.h | 375 +++++++++
src/drivers/net/igbvf/igbvf_defines.h | 1395 +++++++++++++++++++++++++++++++++
src/drivers/net/igbvf/igbvf_main.c | 955 +++++++++++++++++++++++
src/drivers/net/igbvf/igbvf_mbx.c | 404 ++++++++++
src/drivers/net/igbvf/igbvf_mbx.h | 87 ++
src/drivers/net/igbvf/igbvf_osdep.h | 121 +++
src/drivers/net/igbvf/igbvf_regs.h | 338 ++++++++
src/drivers/net/igbvf/igbvf_vf.c | 454 +++++++++++
src/drivers/net/igbvf/igbvf_vf.h | 345 ++++++++
src/include/ipxe/errfile.h | 1
12 files changed, 4512 insertions(+), 0 deletions(-)
create mode 100644 src/drivers/net/igbvf/Makefile
create mode 100644 src/drivers/net/igbvf/igbvf.h
create mode 100644 src/drivers/net/igbvf/igbvf_defines.h
create mode 100644 src/drivers/net/igbvf/igbvf_main.c
create mode 100644 src/drivers/net/igbvf/igbvf_mbx.c
create mode 100644 src/drivers/net/igbvf/igbvf_mbx.h
create mode 100644 src/drivers/net/igbvf/igbvf_osdep.h
create mode 100644 src/drivers/net/igbvf/igbvf_regs.h
create mode 100644 src/drivers/net/igbvf/igbvf_vf.c
create mode 100644 src/drivers/net/igbvf/igbvf_vf.h
diff --git a/src/Makefile b/src/Makefile
index a4815a7..d51591e 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -64,6 +64,7 @@ SRCDIRS += drivers/net
SRCDIRS += drivers/net/e1000
SRCDIRS += drivers/net/e1000e
SRCDIRS += drivers/net/igb
+SRCDIRS += drivers/net/igbvf
SRCDIRS += drivers/net/phantom
SRCDIRS += drivers/net/rtl818x
SRCDIRS += drivers/net/ath5k
diff --git a/src/drivers/net/igbvf/Makefile b/src/drivers/net/igbvf/Makefile
new file mode 100644
index 0000000..dc99311
--- /dev/null
+++ b/src/drivers/net/igbvf/Makefile
@@ -0,0 +1,36 @@
+################################################################################
+#
+# Intel(R) 82576 Virtual Function Linux driver
+# Copyright(c) 2009 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82576 VF ethernet driver
+#
+
+obj-$(CONFIG_IGBVF) += igbvf.o
+
+igbvf-objs := igbvf_vf.o \
+ igbvf_mbx.o \
+ igbvf_main.o
diff --git a/src/drivers/net/igbvf/igbvf.h b/src/drivers/net/igbvf/igbvf.h
new file mode 100644
index 0000000..3d2a090
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf.h
@@ -0,0 +1,375 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGBVF_H_
+#define _IGBVF_H_
+
+#include "igbvf_vf.h"
+
+/* Forward declarations */
+struct igbvf_info;
+struct igbvf_adapter;
+
+/* Interrupt defines */
+#define IGBVF_START_ITR 648 /* ~6000 ints/sec */
+
+/* Tx/Rx descriptor defines */
+#define IGBVF_DEFAULT_TXD 256
+#define IGBVF_MAX_TXD 4096
+#define IGBVF_MIN_TXD 80
+
+#define IGBVF_DEFAULT_RXD 256
+#define IGBVF_MAX_RXD 4096
+#define IGBVF_MIN_RXD 80
+
+#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
+ */
+#define IGBVF_RX_PTHRESH 16
+#define IGBVF_RX_HTHRESH 8
+#define IGBVF_RX_WTHRESH 1
+
+#define IGBVF_TX_PTHRESH 8
+#define IGBVF_TX_HTHRESH 1
+#define IGBVF_TX_WTHRESH 1
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define IGBVF_TX_QUEUE_WAKE 32
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define IGBVF_EEPROM_APME 0x0400
+
+#define IGBVF_MNG_VLAN_NONE (-1)
+
+enum igbvf_boards {
+ board_vf,
+};
+
+struct igbvf_queue_stats {
+ u64 packets;
+ u64 bytes;
+};
+
+/*
+ * wrappers around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct igbvf_buffer {
+ dma_addr_t dma;
+ dma_addr_t page_dma;
+ struct sk_buff *skb;
+ union {
+ /* Tx */
+ struct {
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ };
+ /* Rx */
+ struct {
+ struct page *page;
+ unsigned int page_offset;
+ };
+ };
+ struct page *page;
+};
+
+struct igbvf_ring {
+ struct igbvf_adapter *adapter; /* backlink */
+ void *desc; /* pointer to ring memory */
+ dma_addr_t dma; /* phys address of ring */
+ unsigned int size; /* length of ring in bytes */
+ unsigned int count; /* number of desc. in ring */
+
+ u16 next_to_use;
+ u16 next_to_clean;
+
+ u16 head;
+ u16 tail;
+
+ /* array of buffer information structs */
+ struct igbvf_buffer *buffer_info;
+#if 0
+ struct napi_struct napi;
+
+ char name[IFNAMSIZ + 5];
+#endif
+ u32 eims_value;
+ u32 itr_val;
+ u16 itr_register;
+ int set_itr;
+
+ struct sk_buff *rx_skb_top;
+
+ struct igbvf_queue_stats stats;
+};
+
+/* board specific private data structure */
+struct igbvf_adapter {
+#if 0
+ struct timer_list watchdog_timer;
+ struct timer_list blink_timer;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+
+ const struct igbvf_info *ei;
+
+ struct vlan_group *vlgrp;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 polling_interval;
+ u16 mng_vlan_id;
+ u16 link_speed;
+ u16 link_duplex;
+
+ spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
+
+ /* track device up/down/testing state */
+ unsigned long state;
+
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ /*
+ * Tx
+ */
+ struct igbvf_ring *tx_ring /* One per active queue */
+ ____cacheline_aligned_in_smp;
+
+ unsigned long tx_queue_len;
+ unsigned int restart_queue;
+ u32 txd_cmd;
+
+ bool detect_tx_hung;
+ u8 tx_timeout_factor;
+
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+
+ /* Tx stats */
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u32 tx_dma_failed;
+
+ /*
+ * Rx
+ */
+ struct igbvf_ring *rx_ring;
+
+ /* Rx stats */
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 alloc_rx_buff_failed;
+ u32 rx_dma_failed;
+
+ unsigned int rx_ps_hdr_size;
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+ spinlock_t stats_lock; /* prevent concurrent stats updates */
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+
+ /* The VF counters don't clear on read so we have to get a base
+ * count on driver start up and always subtract that base on
+ * on the first update, thus the flag..
+ */
+ struct e1000_vf_stats stats;
+ u64 zero_base;
+
+ struct igbvf_ring test_tx_ring;
+ struct igbvf_ring test_rx_ring;
+ u32 test_icr;
+
+ u32 msg_enable;
+ struct msix_entry *msix_entries;
+ int int_mode;
+ u32 eims_enable_mask;
+ u32 eims_other;
+ u32 int_counter0;
+ u32 int_counter1;
+
+ u32 eeprom_wol;
+ u32 wol;
+ u32 pba;
+
+ bool fc_autoneg;
+
+ unsigned long led_status;
+
+ unsigned int flags;
+ unsigned long last_reset;
+ u32 *config_space;
+#endif
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_device *pdev;
+ struct net_device_stats net_stats;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+
+ u32 min_frame_size;
+ u32 max_frame_size;
+
+ u32 max_hw_frame_size;
+
+#define NUM_TX_DESC 8
+#define NUM_RX_DESC 8
+
+ struct io_buffer *tx_iobuf[NUM_TX_DESC];
+ struct io_buffer *rx_iobuf[NUM_RX_DESC];
+
+ union e1000_adv_tx_desc *tx_base;
+ union e1000_adv_rx_desc *rx_base;
+
+ uint32_t tx_ring_size;
+ uint32_t rx_ring_size;
+
+ uint32_t tx_head;
+ uint32_t tx_tail;
+ uint32_t tx_fill_ctr;
+
+ uint32_t rx_curr;
+
+ uint32_t ioaddr;
+ uint32_t irqno;
+
+ uint32_t tx_int_delay;
+ uint32_t tx_abs_int_delay;
+ uint32_t txd_cmd;
+};
+
+struct igbvf_info {
+ enum e1000_mac_type mac;
+ unsigned int flags;
+ u32 pba;
+ void (*init_ops)(struct e1000_hw *);
+ s32 (*get_variants)(struct igbvf_adapter *);
+};
+
+/* hardware capability, feature, and workaround flags */
+#define IGBVF_FLAG_RX_CSUM_DISABLED (1 << 0)
+
+#define IGBVF_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
+ (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define IGBVF_RX_DESC_ADV(R, i) \
+ (&(((union e1000_adv_rx_desc *)((R).desc))[i]))
+#define IGBVF_TX_DESC_ADV(R, i) \
+ (&(((union e1000_adv_tx_desc *)((R).desc))[i]))
+#define IGBVF_TX_CTXTDESC_ADV(R, i) \
+ (&(((struct e1000_adv_tx_context_desc *)((R).desc))[i]))
+
+enum igbvf_state_t {
+ __IGBVF_TESTING,
+ __IGBVF_RESETTING,
+ __IGBVF_DOWN
+};
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+extern char igbvf_driver_name[];
+extern const char igbvf_driver_version[];
+
+extern void igbvf_check_options(struct igbvf_adapter *adapter);
+extern void igbvf_set_ethtool_ops(struct net_device *netdev);
+#ifdef ETHTOOL_OPS_COMPAT
+extern int ethtool_ioctl(struct ifreq *ifr);
+#endif
+
+extern int igbvf_up(struct igbvf_adapter *adapter);
+extern void igbvf_down(struct igbvf_adapter *adapter);
+extern void igbvf_reinit_locked(struct igbvf_adapter *adapter);
+extern void igbvf_reset(struct igbvf_adapter *adapter);
+extern int igbvf_setup_rx_resources(struct igbvf_adapter *adapter);
+extern int igbvf_setup_tx_resources(struct igbvf_adapter *adapter);
+extern void igbvf_free_rx_resources(struct igbvf_adapter *adapter);
+extern void igbvf_free_tx_resources(struct igbvf_adapter *adapter);
+extern void igbvf_update_stats(struct igbvf_adapter *adapter);
+extern void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter);
+extern void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter);
+
+extern unsigned int copybreak;
+
+static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
+{
+ return readl(hw->hw_addr + reg);
+}
+
+static inline void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+ writel(val, hw->hw_addr + reg);
+}
+#define er32(reg) E1000_READ_REG(hw, E1000_##reg)
+#define ew32(reg,val) E1000_WRITE_REG(hw, E1000_##reg, (val))
+#define e1e_flush() er32(STATUS)
+
+#endif /* _IGBVF_H_ */
diff --git a/src/drivers/net/igbvf/igbvf_defines.h b/src/drivers/net/igbvf/igbvf_defines.h
new file mode 100644
index 0000000..7cf4ddb
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_defines.h
@@ -0,0 +1,1395 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+#ifndef _IGBVF_DEFINES_H_
+#define _IGBVF_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_LSCWE 0x00000010 /* Link Status wake up enable */
+#define E1000_WUC_LSCWO 0x00000020 /* Link Status wake up override */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /*Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC E1000_WUFC_LNKC
+#define E1000_WUS_MAG E1000_WUFC_MAG
+#define E1000_WUS_EX E1000_WUFC_EX
+#define E1000_WUS_MC E1000_WUFC_MC
+#define E1000_WUS_BC E1000_WUFC_BC
+#define E1000_WUS_ARP E1000_WUFC_ARP
+#define E1000_WUS_IPV4 E1000_WUFC_IPV4
+#define E1000_WUS_IPV6 E1000_WUFC_IPV6
+#define E1000_WUS_FLX0 E1000_WUFC_FLX0
+#define E1000_WUS_FLX1 E1000_WUFC_FLX1
+#define E1000_WUS_FLX2 E1000_WUFC_FLX2
+#define E1000_WUS_FLX3 E1000_WUFC_FLX3
+#define E1000_WUS_FLX_FILTERS E1000_WUFC_FLX_FILTERS
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+/* Reserved (bits 4,5) in >= 82575 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Definable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Definable Pin 5 */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Definable Pin 6 */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */
+/* SDP 4/5 (bits 8,9) are reserved in >= 82575 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIX_SERDES 0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_CANC 0x04000000 /* Int delay cancellation */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+/* IAME enable bit (27) was removed in >= 82575 */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Int acknowledge Auto-mask */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error
+ * detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity
+ * error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_I2CCMD_REG_ADDR_SHIFT 16
+#define E1000_I2CCMD_REG_ADDR 0x00FF0000
+#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
+#define E1000_I2CCMD_PHY_ADDR 0x07000000
+#define E1000_I2CCMD_OPCODE_READ 0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
+#define E1000_I2CCMD_RESET 0x10000000
+#define E1000_I2CCMD_READY 0x20000000
+#define E1000_I2CCMD_INTERRUPT_ENA 0x40000000
+#define E1000_I2CCMD_ERROR 0x80000000
+#define E1000_MAX_SGMII_PHY_REG_ADDR 255
+#define E1000_I2CCMD_PHY_TIMEOUT 200
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 13
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_ENABLE_MASK 0x00000007
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+/* Enable Neighbor Discovery Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+/* Enable MNG packets to host memory */
+#define E1000_MANC_EN_MNG2HOST 0x00200000
+/* Enable IP address filtering */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+/* Receive Control */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min thresh size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min thresh size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min thresh size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+
+/*
+ * Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM 0x01
+#define E1000_SWFW_PHY0_SM 0x02
+#define E1000_SWFW_PHY1_SM 0x04
+#define E1000_SWFW_CSR_SM 0x08
+
+/* FACTPS Definitions */
+#define E1000_FACTPS_LFS 0x40000000 /* LAN Function Select */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock
+ * indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through
+ * PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external
+ * LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to ME */
+#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
+
+/*
+ * Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+#define E1000_CONNSW_ENRGSRC 0x4
+#define E1000_PCS_CFG_PCS_EN 8
+#define E1000_PCS_LCTL_FLV_LINK_UP 1
+#define E1000_PCS_LCTL_FSV_10 0
+#define E1000_PCS_LCTL_FSV_100 2
+#define E1000_PCS_LCTL_FSV_1000 4
+#define E1000_PCS_LCTL_FDV_FULL 8
+#define E1000_PCS_LCTL_FSD 0x10
+#define E1000_PCS_LCTL_FORCE_LINK 0x20
+#define E1000_PCS_LCTL_LOW_LINK_LATCH 0x40
+#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
+#define E1000_PCS_LCTL_AN_ENABLE 0x10000
+#define E1000_PCS_LCTL_AN_RESTART 0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
+#define E1000_PCS_LCTL_AN_SGMII_BYPASS 0x80000
+#define E1000_PCS_LCTL_AN_SGMII_TRIGGER 0x100000
+#define E1000_PCS_LCTL_FAST_LINK_TIMER 0x1000000
+#define E1000_PCS_LCTL_LINK_OK_FIX 0x2000000
+#define E1000_PCS_LCTL_CRS_ON_NI 0x4000000
+#define E1000_ENABLE_SERDES_LOOPBACK 0x0410
+
+#define E1000_PCS_LSTS_LINK_OK 1
+#define E1000_PCS_LSTS_SPEED_10 0
+#define E1000_PCS_LSTS_SPEED_100 2
+#define E1000_PCS_LSTS_SPEED_1000 4
+#define E1000_PCS_LSTS_DUPLEX_FULL 8
+#define E1000_PCS_LSTS_SYNK_OK 0x10
+#define E1000_PCS_LSTS_AN_COMPLETE 0x10000
+#define E1000_PCS_LSTS_AN_PAGE_RX 0x20000
+#define E1000_PCS_LSTS_AN_TIMED_OUT 0x40000
+#define E1000_PCS_LSTS_AN_REMOTE_FAULT 0x80000
+#define E1000_PCS_LSTS_AN_ERROR_RWS 0x100000
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state.
+ * Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution
+ * disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+
+/* Constants used to interpret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /*PCI-X bus speed 100-133 MHz*/
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#define PHY_FORCE_TIME 20
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x00000020
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x00002000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_SHIFT 8 /* POPTS shift */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+/* Extended desc bits for Linksec and timesync */
+
+/* Transmit Control */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+
+/* Transmit Arbitration Count */
+#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Header split receive */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+#define E1000_RFCTL_LEF 0x00040000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLD_SHIFT 12
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
+
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+
+#define ETHERNET_FCS_SIZE 4
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+/* PBA constants */
+#define E1000_PBA_6K 0x0006 /* 6KB */
+#define E1000_PBA_8K 0x0008 /* 8KB */
+#define E1000_PBA_10K 0x000A /* 10KB */
+#define E1000_PBA_12K 0x000C /* 12KB */
+#define E1000_PBA_14K 0x000E /* 14KB */
+#define E1000_PBA_16K 0x0010 /* 16KB */
+#define E1000_PBA_18K 0x0012
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_26K 0x001A
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_35K 0x0023
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB */
+#define E1000_PBA_64K 0x0040 /* 64KB */
+
+#define E1000_PBS_16K E1000_PBA_16K
+#define E1000_PBS_24K E1000_PBA_24K
+
+#define IFS_MAX 80
+#define IFS_MIN 40
+#define IFS_RATIO 4
+#define IFS_STEP 10
+#define MIN_NUM_XMITS 1000
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_VMMB 0x00000100 /* VM MB event */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver
+ * should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* Q0 Rx desc FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* Q0 Tx desc FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity err */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* Q1 Rx desc FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* Q1 Tx desc FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW
+ * bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates
+ * an interrupt */
+#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
+#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
+
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* Q0 Rx desc FIFO
+ * parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* Q0 Tx desc FIFO
+ * parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer
+ * parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity
+ * error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* Q1 Rx desc FIFO
+ * parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* Q1 Tx desc FIFO
+ * parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Cause Set */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Tx desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* Q0 Rx desc FIFO
+ * parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* Q0 Tx desc FIFO
+ * parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer
+ * parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity
+ * error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* Q1 Rx desc FIFO
+ * parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* Q1 Tx desc FIFO
+ * parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
+/* Enable the counting of descriptors still to be processed. */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address */
+/*
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots. However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAH_POOL_MASK 0x03FC0000
+#define E1000_RAH_POOL_1 0x00040000
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_NVM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_MBX 15
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define FIBER_LINK_UP_LIMIT 50
+#define COPPER_LINK_UP_LIMIT 10
+#define PHY_AUTO_NEG_LIMIT 45
+#define PHY_FORCE_LIMIT 20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+#define MDIO_OWNERSHIP_TIMEOUT 10
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT 10
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+
+/* PCI Express Control */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define E1000_GCR_CAP_VER2 0x00040000
+
+#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local Tx is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
+
+/* NVM Control */
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* NVM Data In */
+#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
+#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_EECD_TYPE 0x00002000 /* NVM Type (1-SPI, 0-Microwire) */
+#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
+#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
+
+#define E1000_NVM_SWDPIN0 0x0001 /* SWDPIN 0 NVM Value */
+#define E1000_NVM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
+#define E1000_FLASH_UPDATES 2000
+
+/* NVM Word Offsets */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004
+#define NVM_VERSION 0x0005
+#define NVM_SERDES_AMPLITUDE 0x0006 /* SERDES output amplitude */
+#define NVM_PHY_CLASS_WORD 0x0007
+#define NVM_INIT_CONTROL1_REG 0x000A
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_SWDEF_PINS_CTRL_PORT_1 0x0010
+#define NVM_INIT_CONTROL3_PORT_B 0x0014
+#define NVM_INIT_3GIO_3 0x001A
+#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020
+#define NVM_INIT_CONTROL3_PORT_A 0x0024
+#define NVM_CFG 0x0012
+#define NVM_FLASH_VERSION 0x0032
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+
+#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD0F_PAUSE 0x1000
+#define NVM_WORD0F_ASM_DIR 0x2000
+#define NVM_WORD0F_ANE 0x0800
+#define NVM_WORD0F_SWPDIO_EXT_MASK 0x00F0
+#define NVM_WORD0F_LPLU 0x0001
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+#define NVM_WORD1A_ASPM_MASK 0x000C
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM 0xBABA
+
+#define NVM_MAC_ADDR_OFFSET 0
+#define NVM_PBA_OFFSET_0 8
+#define NVM_PBA_OFFSET_1 9
+#define NVM_RESERVED_WORD 0xFFFF
+#define NVM_PHY_CLASS_A 0x8000
+#define NVM_SERDES_AMPLITUDE_MASK 0x000F
+#define NVM_SIZE_MASK 0x1C00
+#define NVM_SIZE_SHIFT 10
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+#define NVM_SWDPIO_EXT_SHIFT 4
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
+#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
+#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
+#define NVM_WRDI_OPCODE_SPI 0x04 /* NVM reset Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+#define NVM_WRSR_OPCODE_SPI 0x01 /* NVM write Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI 0x01
+#define NVM_STATUS_WEN_SPI 0x02
+#define NVM_STATUS_BP0_SPI 0x04
+#define NVM_STATUS_BP1_SPI 0x08
+#define NVM_STATUS_WPEN_SPI 0x80
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCI_HEADER_TYPE_REGISTER 0x0E
+#define PCIE_LINK_STATUS 0x12
+#define PCIE_DEVICE_CONTROL2 0x28
+
+#define PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define PCIE_LINK_WIDTH_MASK 0x3F0
+#define PCIE_LINK_WIDTH_SHIFT 4
+#define PCIE_DEVICE_CONTROL2_16ms 0x0005
+
+#ifndef ETH_ADDR_LEN
+#define ETH_ADDR_LEN 6
+#endif
+
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs. */
+/*
+ * I = Integrated
+ * E = External
+ */
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define GG82563_E_PHY_ID 0x01410CA0
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+#define M88_VENDOR 0x0141
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+/*
+ * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
+ * 0=Normal 10BASE-T Rx Threshold
+ */
+#define M88E1000_PSCR_EN_10BT_EXT_DIST 0x0080
+/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+/*
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+/*
+ * 1 = Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
+/*
+ * Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT 5
+#define GG82563_REG(page, reg) \
+ (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG 30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL \
+ GG82563_REG(0, 16) /* PHY Specific Control */
+#define GG82563_PHY_SPEC_STATUS \
+ GG82563_REG(0, 17) /* PHY Specific Status */
+#define GG82563_PHY_INT_ENABLE \
+ GG82563_REG(0, 18) /* Interrupt Enable */
+#define GG82563_PHY_SPEC_STATUS_2 \
+ GG82563_REG(0, 19) /* PHY Specific Status 2 */
+#define GG82563_PHY_RX_ERR_CNTR \
+ GG82563_REG(0, 21) /* Receive Error Counter */
+#define GG82563_PHY_PAGE_SELECT \
+ GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2 \
+ GG82563_REG(0, 26) /* PHY Specific Control 2 */
+#define GG82563_PHY_PAGE_SELECT_ALT \
+ GG82563_REG(0, 29) /* Alternate Page Select */
+#define GG82563_PHY_TEST_CLK_CTRL \
+ GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */
+
+#define GG82563_PHY_MAC_SPEC_CTRL \
+ GG82563_REG(2, 21) /* MAC Specific Control Register */
+#define GG82563_PHY_MAC_SPEC_CTRL_2 \
+ GG82563_REG(2, 26) /* MAC Specific Control 2 */
+
+#define GG82563_PHY_DSP_DISTANCE \
+ GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+#define GG82563_PHY_KMRN_MODE_CTRL \
+ GG82563_REG(193, 16) /* Kumeran Mode Control */
+#define GG82563_PHY_PORT_RESET \
+ GG82563_REG(193, 17) /* Port Reset */
+#define GG82563_PHY_REVISION_ID \
+ GG82563_REG(193, 18) /* Revision ID */
+#define GG82563_PHY_DEVICE_ID \
+ GG82563_REG(193, 19) /* Device ID */
+#define GG82563_PHY_PWR_MGMT_CTRL \
+ GG82563_REG(193, 20) /* Power Management Control */
+#define GG82563_PHY_RATE_ADAPT_CTRL \
+ GG82563_REG(193, 25) /* Rate Adaptation Control */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \
+ GG82563_REG(194, 16) /* FIFO's Control/Status */
+#define GG82563_PHY_KMRN_CTRL \
+ GG82563_REG(194, 17) /* Control */
+#define GG82563_PHY_INBAND_CTRL \
+ GG82563_REG(194, 18) /* Inband Control */
+#define GG82563_PHY_KMRN_DIAGNOSTIC \
+ GG82563_REG(194, 19) /* Diagnostic */
+#define GG82563_PHY_ACK_TIMEOUTS \
+ GG82563_REG(194, 20) /* Acknowledge Timeouts */
+#define GG82563_PHY_ADV_ABILITY \
+ GG82563_REG(194, 21) /* Advertised Ability */
+#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \
+ GG82563_REG(194, 23) /* Link Partner Advertised Ability */
+#define GG82563_PHY_ADV_NEXT_PAGE \
+ GG82563_REG(194, 24) /* Advertised Next Page */
+#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \
+ GG82563_REG(194, 25) /* Link Partner Advertised Next page */
+#define GG82563_PHY_KMRN_MISC \
+ GG82563_REG(194, 26) /* Misc. */
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+
+/* SerDes Control */
+#define E1000_GEN_CTL_READY 0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT 8
+#define E1000_GEN_POLL_TIMEOUT 640
+
+#endif /* _IGBVF_DEFINES_H_ */
diff --git a/src/drivers/net/igbvf/igbvf_main.c b/src/drivers/net/igbvf/igbvf_main.c
new file mode 100644
index 0000000..04d546c
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_main.c
@@ -0,0 +1,955 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ Copyright(c) 2010 Eric Keller <ekeller at princeton.edu>
+ Copyright(c) 2010 Red Hat Inc.
+ Alex Williamson <alex.williamson at redhat.com>
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+#include "igbvf.h"
+
+/**
+ * igbvf_setup_tx_resources - allocate Tx resources (Descriptors)
+ *
+ * @v adapter e1000 private structure
+ *
+ * @ret rc Returns 0 on success, negative on failure
+ **/
+int igbvf_setup_tx_resources ( struct igbvf_adapter *adapter )
+{
+ DBG ( "igbvf_setup_tx_resources\n" );
+
+ /* Allocate transmit descriptor ring memory.
+ It must not cross a 64K boundary because of hardware errata #23
+ so we use malloc_dma() requesting a 128 byte block that is
+ 128 byte aligned. This should guarantee that the memory
+ allocated will not cross a 64K boundary, because 128 is an
+ even multiple of 65536 ( 65536 / 128 == 512 ), so all possible
+ allocations of 128 bytes on a 128 byte boundary will not
+ cross 64K bytes.
+ */
+
+ adapter->tx_base =
+ malloc_dma ( adapter->tx_ring_size, adapter->tx_ring_size );
+
+ if ( ! adapter->tx_base ) {
+ return -ENOMEM;
+ }
+
+ memset ( adapter->tx_base, 0, adapter->tx_ring_size );
+
+ DBG ( "adapter->tx_base = %#08lx\n", virt_to_bus ( adapter->tx_base ) );
+
+ return 0;
+}
+
+/**
+ * igbvf_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+void igbvf_free_tx_resources ( struct igbvf_adapter *adapter )
+{
+ DBG ( "igbvf_free_tx_resources\n" );
+
+ free_dma ( adapter->tx_base, adapter->tx_ring_size );
+}
+
+/**
+ * igbvf_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+void igbvf_free_rx_resources ( struct igbvf_adapter *adapter )
+{
+ int i;
+
+ DBG ( "igbvf_free_rx_resources\n" );
+
+ free_dma ( adapter->rx_base, adapter->rx_ring_size );
+
+ for ( i = 0; i < NUM_RX_DESC; i++ ) {
+ free_iob ( adapter->rx_iobuf[i] );
+ }
+}
+
+/**
+ * igbvf_refill_rx_ring - allocate Rx io_buffers
+ *
+ * @v adapter e1000 private structure
+ *
+ * @ret rc Returns 0 on success, negative on failure
+ **/
+static int igbvf_refill_rx_ring ( struct igbvf_adapter *adapter )
+{
+ int i, rx_curr;
+ int rc = 0;
+ union e1000_adv_rx_desc *rx_curr_desc;
+ struct e1000_hw *hw = &adapter->hw;
+ struct io_buffer *iob;
+
+ DBGP ("igbvf_refill_rx_ring\n");
+
+ for ( i = 0; i < NUM_RX_DESC; i++ ) {
+ rx_curr = ( ( adapter->rx_curr + i ) % NUM_RX_DESC );
+ rx_curr_desc = adapter->rx_base + rx_curr;
+
+ if ( rx_curr_desc->wb.upper.status_error & E1000_RXD_STAT_DD )
+ continue;
+
+ if ( adapter->rx_iobuf[rx_curr] != NULL )
+ continue;
+
+ DBG2 ( "Refilling rx desc %d\n", rx_curr );
+
+ iob = alloc_iob ( MAXIMUM_ETHERNET_VLAN_SIZE );
+ adapter->rx_iobuf[rx_curr] = iob;
+
+ rx_curr_desc->wb.upper.status_error = 0;
+
+ if ( ! iob ) {
+ DBG ( "alloc_iob failed\n" );
+ rc = -ENOMEM;
+ break;
+ } else {
+ rx_curr_desc->read.pkt_addr = virt_to_bus ( iob->data );
+ rx_curr_desc->read.hdr_addr = 0;
+ ew32 ( RDT(0), rx_curr );
+ }
+ }
+ return rc;
+}
+
+/**
+ * igbvf_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static void igbvf_irq_disable ( struct igbvf_adapter *adapter )
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32 ( EIMC, ~0 );
+}
+
+/**
+ * igbvf_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static void igbvf_irq_enable ( struct igbvf_adapter *adapter )
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32 ( EIAC, IMS_ENABLE_MASK );
+ ew32 ( EIAM, IMS_ENABLE_MASK );
+ ew32 ( EIMS, IMS_ENABLE_MASK );
+}
+
+/**
+ * igbvf_irq - enable or Disable interrupts
+ *
+ * @v adapter e1000 adapter
+ * @v action requested interrupt action
+ **/
+static void igbvf_irq ( struct net_device *netdev, int enable )
+{
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+
+ DBG ( "igbvf_irq\n" );
+
+ if ( enable ) {
+ igbvf_irq_enable ( adapter );
+ } else {
+ igbvf_irq_disable ( adapter );
+ }
+}
+
+/**
+ * igbvf_process_tx_packets - process transmitted packets
+ *
+ * @v netdev network interface device structure
+ **/
+static void igbvf_process_tx_packets ( struct net_device *netdev )
+{
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+ uint32_t i;
+ uint32_t tx_status;
+ union e1000_adv_tx_desc *tx_curr_desc;
+
+ /* Check status of transmitted packets
+ */
+ DBGP ( "process_tx_packets: tx_head = %d, tx_tail = %d\n", adapter->tx_head,
+ adapter->tx_tail );
+
+ while ( ( i = adapter->tx_head ) != adapter->tx_tail ) {
+
+ tx_curr_desc = ( void * ) ( adapter->tx_base ) +
+ ( i * sizeof ( *adapter->tx_base ) );
+
+ tx_status = tx_curr_desc->wb.status;
+ DBG ( " tx_curr_desc = %#08lx\n", virt_to_bus ( tx_curr_desc ) );
+ DBG ( " tx_status = %#08x\n", tx_status );
+
+ /* if the packet at tx_head is not owned by hardware it is for us */
+ if ( ! ( tx_status & E1000_TXD_STAT_DD ) )
+ break;
+
+ DBG ( "Sent packet. tx_head: %d tx_tail: %d tx_status: %#08x\n",
+ adapter->tx_head, adapter->tx_tail, tx_status );
+
+ netdev_tx_complete ( netdev, adapter->tx_iobuf[i] );
+ DBG ( "Success transmitting packet, tx_status: %#08x\n",
+ tx_status );
+
+ /* Decrement count of used descriptors, clear this descriptor
+ */
+ adapter->tx_fill_ctr--;
+ memset ( tx_curr_desc, 0, sizeof ( *tx_curr_desc ) );
+
+ adapter->tx_head = ( adapter->tx_head + 1 ) % NUM_TX_DESC;
+ }
+}
+
+/**
+ * igbvf_process_rx_packets - process received packets
+ *
+ * @v netdev network interface device structure
+ **/
+static void igbvf_process_rx_packets ( struct net_device *netdev )
+{
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t i;
+ uint32_t rx_status;
+ uint32_t rx_len;
+ uint32_t rx_err;
+ union e1000_adv_rx_desc *rx_curr_desc;
+
+ DBGP ( "igbvf_process_rx_packets\n" );
+
+ /* Process received packets
+ */
+ while ( 1 ) {
+ i = adapter->rx_curr;
+
+ rx_curr_desc = ( void * ) ( adapter->rx_base ) +
+ ( i * sizeof ( *adapter->rx_base ) );
+ rx_status = rx_curr_desc->wb.upper.status_error;
+
+ DBG2 ( "Before DD Check RX_status: %#08x, rx_curr: %d\n",
+ rx_status, i );
+
+ if ( ! ( rx_status & E1000_RXD_STAT_DD ) )
+ break;
+
+ if ( adapter->rx_iobuf[i] == NULL )
+ break;
+
+ DBG ( "E1000_RCTL = %#08x\n", er32 (RCTL) );
+
+ rx_len = rx_curr_desc->wb.upper.length;
+
+ DBG ( "Received packet, rx_curr: %d rx_status: %#08x rx_len: %d\n",
+ i, rx_status, rx_len );
+
+ rx_err = rx_status;
+
+ iob_put ( adapter->rx_iobuf[i], rx_len );
+
+ if ( rx_err & E1000_RXDEXT_ERR_FRAME_ERR_MASK ) {
+
+ netdev_rx_err ( netdev, adapter->rx_iobuf[i], -EINVAL );
+ DBG ( "igbvf_process_rx_packets: Corrupted packet received!"
+ " rx_err: %#08x\n", rx_err );
+ } else {
+ /* Add this packet to the receive queue. */
+ netdev_rx ( netdev, adapter->rx_iobuf[i] );
+ }
+ adapter->rx_iobuf[i] = NULL;
+
+ memset ( rx_curr_desc, 0, sizeof ( *rx_curr_desc ) );
+
+ adapter->rx_curr = ( adapter->rx_curr + 1 ) % NUM_RX_DESC;
+ }
+}
+
+/**
+ * igbvf_poll - Poll for received packets
+ *
+ * @v netdev Network device
+ */
+static void igbvf_poll ( struct net_device *netdev )
+{
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+ uint32_t rx_status;
+ union e1000_adv_rx_desc *rx_curr_desc;
+
+ DBGP ( "igbvf_poll\n" );
+
+ rx_curr_desc = ( void * ) ( adapter->rx_base ) +
+ ( adapter->rx_curr * sizeof ( *adapter->rx_base ) );
+ rx_status = rx_curr_desc->wb.upper.status_error;
+
+ if ( ! ( rx_status & E1000_RXD_STAT_DD ) )
+ return;
+
+ igbvf_process_tx_packets ( netdev );
+
+ igbvf_process_rx_packets ( netdev );
+
+ igbvf_refill_rx_ring ( adapter );
+}
+
+/**
+ * igbvf_config_collision_dist_generic - Configure collision distance
+ * @hw: pointer to the HW structure
+ *
+ * Configures the collision distance to the default value and is used
+ * during link setup. Currently no func pointer exists and all
+ * implementations are handled in the generic version of this function.
+ **/
+void igbvf_config_collision_dist ( struct e1000_hw *hw )
+{
+ u32 tctl;
+
+ DBG ("igbvf_config_collision_dist");
+
+ tctl = er32 (TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+ ew32 (TCTL, tctl);
+ e1e_flush();
+}
+
+/**
+ * igbvf_configure_tx - Configure Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igbvf_configure_tx ( struct igbvf_adapter *adapter )
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl, txdctl;
+
+ DBG ( "igbvf_configure_tx\n" );
+
+ /* disable transmits while setting up the descriptors */
+ tctl = er32 ( TCTL );
+ ew32 ( TCTL, tctl & ~E1000_TCTL_EN );
+ e1e_flush();
+ mdelay (10);
+
+ ew32 ( TDBAH(0), 0 );
+ ew32 ( TDBAL(0), virt_to_bus ( adapter->tx_base ) );
+ ew32 ( TDLEN(0), adapter->tx_ring_size );
+
+ DBG ( "E1000_TDBAL(0): %#08x\n", er32 ( TDBAL(0) ) );
+ DBG ( "E1000_TDLEN(0): %d\n", er32 ( TDLEN(0) ) );
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ ew32 ( TDH(0), 0 );
+ ew32 ( TDT(0), 0 );
+
+ adapter->tx_head = 0;
+ adapter->tx_tail = 0;
+ adapter->tx_fill_ctr = 0;
+
+ txdctl = er32(TXDCTL(0));
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ ew32 ( TXDCTL(0), txdctl );
+
+ txdctl = er32 ( TXDCTL(0) );
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ ew32 ( TXDCTL(0), txdctl );
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_IFCS;
+
+ /* Advanced descriptor */
+ adapter->txd_cmd |= E1000_ADVTXD_DCMD_DEXT;
+
+ /* (not part of cmd, but in same 32 bit word...) */
+ adapter->txd_cmd |= E1000_ADVTXD_DTYP_DATA;
+
+ /* enable Report Status bit */
+ adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS;
+
+ /* Program the Transmit Control Register */
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ igbvf_config_collision_dist ( hw );
+
+ /* Enable transmits */
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ e1e_flush();
+}
+
+/* igbvf_reset - bring the hardware into a known good state
+ *
+ * This function boots the hardware and enables some settings that
+ * require a configuration cycle of the hardware - those cannot be
+ * set/changed during runtime. After reset the device needs to be
+ * properly configured for Rx, Tx etc.
+ */
+void igbvf_reset ( struct igbvf_adapter *adapter )
+{
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Allow time for pending master requests to run */
+ if ( mac->ops.reset_hw(hw) )
+ DBG ("PF still resetting\n");
+
+ mac->ops.init_hw ( hw );
+
+ if ( is_valid_ether_addr(adapter->hw.mac.addr) ) {
+ memcpy ( netdev->hw_addr, adapter->hw.mac.addr, ETH_ALEN );
+ }
+}
+
+extern void igbvf_init_function_pointers_vf(struct e1000_hw *hw);
+
+/**
+ * igbvf_sw_init - Initialize general software structures (struct igbvf_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igbvf_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit igbvf_sw_init ( struct igbvf_adapter *adapter )
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_device *pdev = adapter->pdev;
+ int rc;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+
+ pci_read_config_byte ( pdev, PCI_REVISION_ID, &hw->revision_id );
+
+ pci_read_config_word ( pdev, PCI_COMMAND, &hw->bus.pci_cmd_word );
+
+ adapter->max_frame_size = MAXIMUM_ETHERNET_VLAN_SIZE + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ /* Set various function pointers */
+ igbvf_init_function_pointers_vf ( &adapter->hw );
+
+ rc = adapter->hw.mac.ops.init_params ( &adapter->hw );
+ if (rc) {
+ DBG ("hw.mac.ops.init_params(&adapter->hw) Failure\n");
+ return rc;
+ }
+
+ rc = adapter->hw.mbx.ops.init_params ( &adapter->hw );
+ if (rc) {
+ DBG ("hw.mbx.ops.init_params(&adapter->hw) Failure\n");
+ return rc;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igbvf_irq_disable ( adapter );
+
+ return 0;
+}
+
+/**
+ * igbvf_setup_srrctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void igbvf_setup_srrctl ( struct igbvf_adapter *adapter )
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 srrctl = 0;
+
+ DBG ( "igbvf_setup_srrctl\n" );
+
+ srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK |
+ E1000_SRRCTL_BSIZEHDR_MASK |
+ E1000_SRRCTL_BSIZEPKT_MASK);
+
+ /* Enable queue drop to avoid head of line blocking */
+ srrctl |= E1000_SRRCTL_DROP_EN;
+
+ /* Setup buffer sizes */
+ srrctl |= 2048 >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+
+ ew32 ( SRRCTL(0), srrctl );
+}
+
+/**
+ * igbvf_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igbvf_configure_rx ( struct igbvf_adapter *adapter )
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rxdctl;
+
+ DBG ( "igbvf_configure_rx\n" );
+
+ /* disable receives */
+ rxdctl = er32 ( RXDCTL(0) );
+ ew32 ( RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE );
+ msleep ( 10 );
+
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ ew32 ( RDBAL(0), virt_to_bus (adapter->rx_base) );
+ ew32 ( RDBAH(0), 0 );
+ ew32 ( RDLEN(0), adapter->rx_ring_size );
+ adapter->rx_curr = 0;
+ ew32 ( RDH(0), 0 );
+ ew32 ( RDT(0), 0 );
+
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ rxdctl &= 0xFFF00000;
+ rxdctl |= IGBVF_RX_PTHRESH;
+ rxdctl |= IGBVF_RX_HTHRESH << 8;
+ rxdctl |= IGBVF_RX_WTHRESH << 16;
+
+ igbvf_rlpml_set_vf ( hw, adapter->max_frame_size );
+
+ /* enable receives */
+ ew32 ( RXDCTL(0), rxdctl );
+ ew32 ( RDT(0), NUM_RX_DESC );
+}
+
+/**
+ * igbvf_setup_rx_resources - allocate Rx resources (Descriptors)
+ *
+ * @v adapter e1000 private structure
+ **/
+int igbvf_setup_rx_resources ( struct igbvf_adapter *adapter )
+{
+ int i;
+ union e1000_adv_rx_desc *rx_curr_desc;
+ struct io_buffer *iob;
+
+ DBG ( "igbvf_setup_rx_resources\n" );
+
+ /* Allocate receive descriptor ring memory.
+ It must not cross a 64K boundary because of hardware errata
+ */
+
+ adapter->rx_base =
+ malloc_dma ( adapter->rx_ring_size, adapter->rx_ring_size );
+
+ if ( ! adapter->rx_base ) {
+ return -ENOMEM;
+ }
+ memset ( adapter->rx_base, 0, adapter->rx_ring_size );
+
+ for ( i = 0; i < NUM_RX_DESC; i++ ) {
+ rx_curr_desc = adapter->rx_base + i;
+ iob = alloc_iob ( MAXIMUM_ETHERNET_VLAN_SIZE );
+ adapter->rx_iobuf[i] = iob;
+ rx_curr_desc->wb.upper.status_error = 0;
+ if ( ! iob ) {
+ DBG ( "alloc_iob failed\n" );
+ return -ENOMEM;
+ } else {
+ rx_curr_desc->read.pkt_addr = virt_to_bus ( iob->data );
+ rx_curr_desc->read.hdr_addr = 0;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * igbvf_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int igbvf_open ( struct net_device *netdev )
+{
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+ int err;
+
+ DBG ("igbvf_open\n");
+
+ /* allocate transmit descriptors */
+ err = igbvf_setup_tx_resources ( adapter );
+ if (err) {
+ DBG ( "Error setting up TX resources!\n" );
+ goto err_setup_tx;
+ }
+
+ igbvf_configure_tx ( adapter );
+
+ igbvf_setup_srrctl( adapter );
+
+ err = igbvf_setup_rx_resources( adapter );
+ if (err) {
+ DBG ( "Error setting up RX resources!\n" );
+ goto err_setup_rx;
+ }
+
+ igbvf_configure_rx ( adapter );
+
+ return 0;
+
+err_setup_rx:
+ DBG ( "err_setup_rx\n" );
+ igbvf_free_tx_resources ( adapter );
+ return err;
+
+err_setup_tx:
+ DBG ( "err_setup_tx\n" );
+ igbvf_reset ( adapter );
+
+ return err;
+}
+
+/**
+ * igbvf_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static void igbvf_close ( struct net_device *netdev )
+{
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t rxdctl;
+ uint32_t icr;
+
+ DBG ( "igbvf_close\n" );
+ icr = er32(EICR);
+
+ igbvf_irq_disable ( adapter );
+
+ /* disable receives */
+ rxdctl = er32 ( RXDCTL(0) );
+ ew32 ( RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE );
+ mdelay ( 10 );
+
+ igbvf_reset ( adapter );
+
+ igbvf_free_tx_resources( adapter );
+ igbvf_free_rx_resources( adapter );
+}
+
+/**
+ * igbvf_transmit - Transmit a packet
+ *
+ * @v netdev Network device
+ * @v iobuf I/O buffer
+ *
+ * @ret rc Returns 0 on success, negative on failure
+ */
+static int igbvf_transmit ( struct net_device *netdev, struct io_buffer *iobuf )
+{
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t tx_curr = adapter->tx_tail;
+ union e1000_adv_tx_desc *tx_curr_desc;
+
+ DBGP ("igbvf_transmit\n");
+
+ if ( adapter->tx_fill_ctr == NUM_TX_DESC ) {
+ DBG ("TX overflow\n");
+ return -ENOBUFS;
+ }
+
+ /* Save pointer to iobuf we have been given to transmit,
+ netdev_tx_complete() will need it later
+ */
+ adapter->tx_iobuf[tx_curr] = iobuf;
+
+ tx_curr_desc = ( void * ) ( adapter->tx_base ) +
+ ( tx_curr * sizeof ( *adapter->tx_base ) );
+
+ DBG ( "tx_curr_desc = %#08lx\n", virt_to_bus ( tx_curr_desc ) );
+ DBG ( "tx_curr_desc + 16 = %#08lx\n", virt_to_bus ( tx_curr_desc ) + 16 );
+ DBG ( "iobuf->data = %#08lx\n", virt_to_bus ( iobuf->data ) );
+
+ /* Add the packet to TX ring
+ */
+ tx_curr_desc->read.buffer_addr = virt_to_bus ( iobuf->data );
+ tx_curr_desc->read.cmd_type_len = adapter->txd_cmd |(iob_len ( iobuf )) ;
+ // minus hdr_len ????
+ tx_curr_desc->read.olinfo_status = ((iob_len ( iobuf )) << E1000_ADVTXD_PAYLEN_SHIFT);
+
+ DBG ( "TX fill: %d tx_curr: %d addr: %#08lx len: %zd\n", adapter->tx_fill_ctr,
+ tx_curr, virt_to_bus ( iobuf->data ), iob_len ( iobuf ) );
+
+ /* Point to next free descriptor */
+ adapter->tx_tail = ( adapter->tx_tail + 1 ) % NUM_TX_DESC;
+ adapter->tx_fill_ctr++;
+
+ /* Write new tail to NIC, making packet available for transmit
+ */
+ ew32 ( TDT(0), adapter->tx_tail );
+ e1e_flush ();
+
+ return 0;
+}
+
+/** igbvf net device operations */
+static struct net_device_operations igbvf_operations = {
+ .open = igbvf_open,
+ .close = igbvf_close,
+ .transmit = igbvf_transmit,
+ .poll = igbvf_poll,
+ .irq = igbvf_irq,
+};
+
+/**
+ * igbvf_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded.
+ *
+ **/
+void igbvf_get_hw_control ( struct igbvf_adapter *adapter )
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = er32 ( CTRL_EXT );
+ ew32 ( CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD );
+}
+
+/**
+ * igbvf_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igbvf_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igbvf_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+int igbvf_probe ( struct pci_device *pdev,
+ const struct pci_device_id *ent __unused )
+{
+ int err;
+ struct net_device *netdev;
+ struct igbvf_adapter *adapter;
+ unsigned long mmio_start, mmio_len;
+ struct e1000_hw *hw;
+
+ DBG ( "igbvf_probe\n" );
+
+ err = -ENOMEM;
+
+ /* Allocate net device ( also allocates memory for netdev->priv
+ and makes netdev-priv point to it ) */
+ netdev = alloc_etherdev ( sizeof ( struct igbvf_adapter ) );
+ if ( ! netdev )
+ goto err_alloc_etherdev;
+
+ /* Associate igbvf-specific network operations operations with
+ * generic network device layer */
+ netdev_init ( netdev, &igbvf_operations );
+
+ /* Associate this network device with given PCI device */
+ pci_set_drvdata ( pdev, netdev );
+ netdev->dev = &pdev->dev;
+
+ /* Initialize driver private storage */
+ adapter = netdev_priv ( netdev );
+ memset ( adapter, 0, ( sizeof ( *adapter ) ) );
+
+ adapter->pdev = pdev;
+
+ adapter->ioaddr = pdev->ioaddr;
+ adapter->hw.io_base = pdev->ioaddr;
+
+ hw = &adapter->hw;
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+
+ adapter->irqno = pdev->irq;
+ adapter->netdev = netdev;
+ adapter->hw.back = adapter;
+
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+ adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+ adapter->tx_ring_size = sizeof ( *adapter->tx_base ) * NUM_TX_DESC;
+ adapter->rx_ring_size = sizeof ( *adapter->rx_base ) * NUM_RX_DESC;
+
+ /* Fix up PCI device */
+ adjust_pci_device ( pdev );
+
+ err = -EIO;
+
+ mmio_start = pci_bar_start ( pdev, PCI_BASE_ADDRESS_0 );
+ mmio_len = pci_bar_size ( pdev, PCI_BASE_ADDRESS_0 );
+
+ DBG ( "mmio_start: %#08lx\n", mmio_start );
+ DBG ( "mmio_len: %#08lx\n", mmio_len );
+
+ adapter->hw.hw_addr = ioremap ( mmio_start, mmio_len );
+ DBG ( "adapter->hw.hw_addr: %p\n", adapter->hw.hw_addr );
+
+ if ( ! adapter->hw.hw_addr ) {
+ DBG ( "err_ioremap\n" );
+ goto err_ioremap;
+ }
+
+ /* setup adapter struct */
+ err = igbvf_sw_init ( adapter );
+ if (err) {
+ DBG ( "err_sw_init\n" );
+ goto err_sw_init;
+ }
+
+ /* reset the controller to put the device in a known good state */
+ err = hw->mac.ops.reset_hw ( hw );
+ if ( err ) {
+ DBG ("PF still in reset state, assigning new address\n");
+ netdev->hw_addr[0] = 0x21;
+ netdev->hw_addr[1] = 0x21;
+ netdev->hw_addr[2] = 0x21;
+ netdev->hw_addr[3] = 0x21;
+ netdev->hw_addr[4] = 0x21;
+ netdev->hw_addr[5] = 0x21;
+ netdev->hw_addr[6] = 0x21;
+ } else {
+ err = hw->mac.ops.read_mac_addr(hw);
+ if (err) {
+ DBG ("Error reading MAC address\n");
+ goto err_hw_init;
+ }
+ }
+
+ memcpy ( netdev->hw_addr, adapter->hw.mac.addr, ETH_ALEN );
+
+ if ( ! is_valid_ether_addr( netdev->hw_addr ) ) {
+ DBG ("Invalid MAC Address: "
+ "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->hw_addr[0], netdev->hw_addr[1],
+ netdev->hw_addr[2], netdev->hw_addr[3],
+ netdev->hw_addr[4], netdev->hw_addr[5]);
+ err = -EIO;
+ goto err_hw_init;
+ }
+
+ /* reset the hardware with the new settings */
+ igbvf_reset ( adapter );
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver. */
+ igbvf_get_hw_control ( adapter );
+
+ /* Mark as link up; we don't yet handle link state */
+ netdev_link_up ( netdev );
+
+ if ( ( err = register_netdev ( netdev ) ) != 0) {
+ DBG ( "err_register\n" );
+ goto err_register;
+ }
+
+ DBG ("igbvf_probe_succeeded\n");
+
+ return 0;
+
+err_register:
+err_hw_init:
+err_sw_init:
+ iounmap ( adapter->hw.hw_addr );
+err_ioremap:
+ netdev_put ( netdev );
+err_alloc_etherdev:
+ return err;
+}
+
+/**
+ * igbvf_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igbvf_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+void igbvf_remove ( struct pci_device *pdev )
+{
+ struct net_device *netdev = pci_get_drvdata ( pdev );
+ struct igbvf_adapter *adapter = netdev_priv ( netdev );
+
+ DBG ( "igbvf_remove\n" );
+
+ if ( adapter->hw.flash_address )
+ iounmap ( adapter->hw.flash_address );
+ if ( adapter->hw.hw_addr )
+ iounmap ( adapter->hw.hw_addr );
+
+ unregister_netdev ( netdev );
+ igbvf_reset ( adapter );
+ netdev_nullify ( netdev );
+ netdev_put ( netdev );
+}
+
+static struct pci_device_id igbvf_pci_tbl[] = {
+ PCI_ROM(0x8086, 0x10CA, "igbvf", "E1000_DEV_ID_82576_VF", 0)
+};
+
+
+struct pci_driver igbvf_driver __pci_driver = {
+ .ids = igbvf_pci_tbl,
+ .id_count = (sizeof(igbvf_pci_tbl) / sizeof(igbvf_pci_tbl[0])),
+ .probe = igbvf_probe,
+ .remove = igbvf_remove,
+};
diff --git a/src/drivers/net/igbvf/igbvf_mbx.c b/src/drivers/net/igbvf/igbvf_mbx.c
new file mode 100644
index 0000000..6580938
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_mbx.c
@@ -0,0 +1,404 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+#include "igbvf_mbx.h"
+
+/**
+ * igbvf_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+static s32 igbvf_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ DEBUGFUNC("igbvf_poll_for_msg");
+
+ if (!countdown || !mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ usec_delay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ * igbvf_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 igbvf_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ DEBUGFUNC("igbvf_poll_for_ack");
+
+ if (!countdown || !mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ usec_delay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ * igbvf_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 igbvf_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ DEBUGFUNC("igbvf_read_posted_mbx");
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = igbvf_poll_for_msg(hw, mbx_id);
+
+ /* if ack received read message, otherwise we timed out */
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * igbvf_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 igbvf_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ DEBUGFUNC("igbvf_write_posted_mbx");
+
+ /* exit if either we can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg */
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = igbvf_poll_for_ack(hw, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * igbvf_init_mbx_ops_generic - Initialize NVM function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Setups up the function pointers to no-op functions
+ **/
+void igbvf_init_mbx_ops_generic(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ mbx->ops.read_posted = igbvf_read_posted_mbx;
+ mbx->ops.write_posted = igbvf_write_posted_mbx;
+}
+
+/**
+ * igbvf_read_v2p_mailbox - read v2p mailbox
+ * @hw: pointer to the HW structure
+ *
+ * This function is used to read the v2p mailbox without losing the read to
+ * clear status bits.
+ **/
+static u32 igbvf_read_v2p_mailbox(struct e1000_hw *hw)
+{
+ u32 v2p_mailbox = E1000_READ_REG(hw, E1000_V2PMAILBOX(0));
+
+ v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox;
+ hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS;
+
+ return v2p_mailbox;
+}
+
+/**
+ * igbvf_check_for_bit_vf - Determine if a status bit was set
+ * @hw: pointer to the HW structure
+ * @mask: bitmask for bits to be tested and cleared
+ *
+ * This function is used to check for the read to clear bits within
+ * the V2P mailbox.
+ **/
+static s32 igbvf_check_for_bit_vf(struct e1000_hw *hw, u32 mask)
+{
+ u32 v2p_mailbox = igbvf_read_v2p_mailbox(hw);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (v2p_mailbox & mask)
+ ret_val = E1000_SUCCESS;
+
+ hw->dev_spec.vf.v2p_mailbox &= ~mask;
+
+ return ret_val;
+}
+
+/**
+ * igbvf_check_for_msg_vf - checks to see if the PF has sent mail
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the PF has set the Status bit or else ERR_MBX
+ **/
+static s32 igbvf_check_for_msg_vf(struct e1000_hw *hw, u16 mbx_id __unused)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ DEBUGFUNC("igbvf_check_for_msg_vf");
+
+ if (!igbvf_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igbvf_check_for_ack_vf - checks to see if the PF has ACK'd
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
+ **/
+static s32 igbvf_check_for_ack_vf(struct e1000_hw *hw, u16 mbx_id __unused)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ DEBUGFUNC("igbvf_check_for_ack_vf");
+
+ if (!igbvf_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igbvf_check_for_rst_vf - checks to see if the PF has reset
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns true if the PF has set the reset done bit or else false
+ **/
+static s32 igbvf_check_for_rst_vf(struct e1000_hw *hw, u16 mbx_id __unused)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ DEBUGFUNC("igbvf_check_for_rst_vf");
+
+ if (!igbvf_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
+ E1000_V2PMAILBOX_RSTI))) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igbvf_obtain_mbx_lock_vf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 igbvf_obtain_mbx_lock_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ DEBUGFUNC("igbvf_obtain_mbx_lock_vf");
+
+ /* Take ownership of the buffer */
+ E1000_WRITE_REG(hw, E1000_V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
+
+ /* reserve mailbox for vf use */
+ if (igbvf_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
+ ret_val = E1000_SUCCESS;
+
+ return ret_val;
+}
+
+/**
+ * igbvf_write_mbx_vf - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 igbvf_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id __unused)
+{
+ s32 ret_val;
+ u16 i;
+
+
+ DEBUGFUNC("igbvf_write_mbx_vf");
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igbvf_obtain_mbx_lock_vf(hw);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ igbvf_check_for_msg_vf(hw, 0);
+ igbvf_check_for_ack_vf(hw, 0);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(0), i, msg[i]);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+ /* Drop VFU and interrupt the PF to tell it a message has been sent */
+ E1000_WRITE_REG(hw, E1000_V2PMAILBOX(0), E1000_V2PMAILBOX_REQ);
+
+out_no_write:
+ return ret_val;
+}
+
+/**
+ * igbvf_read_mbx_vf - Reads a message from the inbox intended for vf
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to read
+ *
+ * returns SUCCESS if it successfuly read message from buffer
+ **/
+static s32 igbvf_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id __unused)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 i;
+
+ DEBUGFUNC("igbvf_read_mbx_vf");
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igbvf_obtain_mbx_lock_vf(hw);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message from the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(0), i);
+
+ /* Acknowledge receipt and release mailbox, then we're done */
+ E1000_WRITE_REG(hw, E1000_V2PMAILBOX(0), E1000_V2PMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+/**
+ * igbvf_init_mbx_params_vf - set initial values for vf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+s32 igbvf_init_mbx_params_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+
+ /* start mailbox as timed out and let the reset_hw call set the timeout
+ * value to begin communications */
+ mbx->timeout = 0;
+ mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
+
+ mbx->size = E1000_VFMAILBOX_SIZE;
+
+ mbx->ops.read = igbvf_read_mbx_vf;
+ mbx->ops.write = igbvf_write_mbx_vf;
+ mbx->ops.read_posted = igbvf_read_posted_mbx;
+ mbx->ops.write_posted = igbvf_write_posted_mbx;
+ mbx->ops.check_for_msg = igbvf_check_for_msg_vf;
+ mbx->ops.check_for_ack = igbvf_check_for_ack_vf;
+ mbx->ops.check_for_rst = igbvf_check_for_rst_vf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ return E1000_SUCCESS;
+}
+
diff --git a/src/drivers/net/igbvf/igbvf_mbx.h b/src/drivers/net/igbvf/igbvf_mbx.h
new file mode 100644
index 0000000..c21af6c
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_mbx.h
@@ -0,0 +1,87 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+#ifndef _IGBVF_MBX_H_
+#define _IGBVF_MBX_H_
+
+#include "igbvf_vf.h"
+
+/* Define mailbox specific registers */
+#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
+#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
+
+/* Define mailbox register bits */
+#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
+#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
+#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
+#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
+#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
+#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
+#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
+
+#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
+ * this are the ACK */
+#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
+ * this are the NACK */
+#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
+ clear to send requests */
+#define E1000_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET 0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
+#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */
+
+void igbvf_init_mbx_ops_generic(struct e1000_hw *hw);
+s32 igbvf_init_mbx_params_vf(struct e1000_hw *);
+
+#endif /* _IGBVF_MBX_H_ */
diff --git a/src/drivers/net/igbvf/igbvf_osdep.h b/src/drivers/net/igbvf/igbvf_osdep.h
new file mode 100644
index 0000000..259b9ec
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_osdep.h
@@ -0,0 +1,121 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+/* glue for the OS-dependent part of igbvf
+ * includes register access macros
+ */
+
+#ifndef _IGBVF_OSDEP_H_
+#define _IGBVF_OSDEP_H_
+
+#define u8 unsigned char
+#define bool boolean_t
+#define dma_addr_t unsigned long
+#define __le16 uint16_t
+#define __le32 uint32_t
+#define __le64 uint64_t
+
+#define __iomem
+#define __devinit
+#define ____cacheline_aligned_in_smp
+
+#define msleep(x) mdelay(x)
+
+#define ETH_FCS_LEN 4
+
+typedef int spinlock_t;
+typedef enum {
+ false = 0,
+ true = 1
+} boolean_t;
+
+#define TRUE 1
+#define FALSE 0
+
+#define usec_delay(x) udelay(x)
+#define msec_delay(x) mdelay(x)
+#define msec_delay_irq(x) mdelay(x)
+
+#define PCI_COMMAND_REGISTER PCI_COMMAND
+#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
+#define ETH_ADDR_LEN ETH_ALEN
+
+
+#define DEBUGOUT(S) if (0) { printf(S); }
+#define DEBUGOUT1(S, A...) if (0) { printf(S, A); }
+
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
+#define DEBUGOUT2 DEBUGOUT1
+#define DEBUGOUT3 DEBUGOUT2
+#define DEBUGOUT7 DEBUGOUT3
+
+#define E1000_WRITE_REG(a, reg, value) do { \
+ writel((value), ((a)->hw_addr + reg)); } while (0)
+
+#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + reg))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) do { \
+ writel((value), ((a)->hw_addr + reg + ((offset) << 2))); } while (0)
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + reg + ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+ writew((value), ((a)->hw_addr + reg + ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+ readw((a)->hw_addr + reg + ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+ writeb((value), ((a)->hw_addr + reg + (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+ readb((a)->hw_addr + reg + (offset)))
+
+#define E1000_WRITE_REG_IO(a, reg, offset) do { \
+ outl(reg, ((a)->io_base)); \
+ outl(offset, ((a)->io_base + 4)); } while(0)
+
+#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS)
+
+#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
+ writel((value), ((a)->flash_address + reg)))
+
+#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \
+ writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg))
+
+#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg))
+
+#endif /* _IGBVF_OSDEP_H_ */
diff --git a/src/drivers/net/igbvf/igbvf_regs.h b/src/drivers/net/igbvf/igbvf_regs.h
new file mode 100644
index 0000000..21603d3
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_regs.h
@@ -0,0 +1,338 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+#ifndef _IGBVF_REGS_H_
+#define _IGBVF_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FEXT 0x0002C /* Future Extended - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* Rx Control - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* Tx Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */
+#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* Tx Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
+#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */
+#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */
+#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDFPCQ(_n) (0x02430 + (0x4 * (_n)))
+#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */
+#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
+/* Split and Replication Rx Control - RW */
+#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */
+#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */
+#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */
+#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */
+#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */
+#define E1000_RXCTL(_n) (0x0C014 + (0x40 * (_n)))
+#define E1000_RQDPC(_n) (0x0C030 + (0x40 * (_n)))
+#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */
+#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */
+/*
+ * Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
+ (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
+ (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
+ (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
+ (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
+ (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
+ (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
+ (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
+ (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
+ (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
+ (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
+ (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
+ (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
+ (0x0E028 + ((_n) * 0x40)))
+#define E1000_TARC(_n) (0x03840 + (_n << 8))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
+#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \
+ (0x0E038 + ((_n) * 0x40)))
+#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \
+ (0x0E03C + ((_n) * 0x40)))
+#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* Tx DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
+#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */
+#define E1000_TDPUMB 0x0357C /* DMA Tx Descriptor uC Mail Box - RW */
+#define E1000_TDPUAD 0x03580 /* DMA Tx Descriptor uC Addr Command - RW */
+#define E1000_TDPUWD 0x03584 /* DMA Tx Descriptor uC Data Write - RW */
+#define E1000_TDPURD 0x03588 /* DMA Tx Descriptor uC Data Read - RW */
+#define E1000_TDPUCTL 0x0358C /* DMA Tx Descriptor uC Control - RW */
+#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */
+#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */
+#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+
+#define E1000_VFGPRC 0x00F10
+#define E1000_VFGORC 0x00F18
+#define E1000_VFMPRC 0x00F3C
+#define E1000_VFGPTC 0x00F14
+#define E1000_VFGOTC 0x00F34
+#define E1000_VFGOTLBC 0x00F50
+#define E1000_VFGPTLBC 0x00F44
+#define E1000_VFGORLBC 0x00F48
+#define E1000_VFGPRLBC 0x00F40
+#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
+#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
+#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */
+#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
+#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */
+#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */
+#define E1000_RPTHC 0x04104 /* Rx Packets To Host */
+#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */
+#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */
+#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
+#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
+#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
+#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
+#define E1000_LENERRS 0x04138 /* Length Errors Count */
+#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
+#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */
+#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
+#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
+#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
+#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */
+#define E1000_1GSTAT_RCV 0x04228 /* 1GSTAT Code Violation Packet Count - RW */
+#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */
+#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
+#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */
+#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
+#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
+#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_SWSM2 0x05B58 /* Driver-only SW semaphore (not used by BOOT agents) */
+#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */
+#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Interface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
+#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
+#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt Rx VLAN Priority - RW */
+#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Allocation Register
+ * (_i) - RW */
+#define E1000_MSIXTADD(_i) (0x0C000 + ((_i) * 0x10)) /* MSI-X Table entry addr
+ * low reg - RW */
+#define E1000_MSIXTUADD(_i) (0x0C004 + ((_i) * 0x10)) /* MSI-X Table entry addr
+ * upper reg - RW */
+#define E1000_MSIXTMSG(_i) (0x0C008 + ((_i) * 0x10)) /* MSI-X Table entry
+ * message reg - RW */
+#define E1000_MSIXVCTRL(_i) (0x0C00C + ((_i) * 0x10)) /* MSI-X Table entry
+ * vector ctrl reg - RW */
+#define E1000_MSIXPBA 0x0E000 /* MSI-X Pending bit array */
+#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */
+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+
+#endif /* _IGBVF_REGS_H_ */
diff --git a/src/drivers/net/igbvf/igbvf_vf.c b/src/drivers/net/igbvf/igbvf_vf.c
new file mode 100644
index 0000000..0b811e5
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_vf.c
@@ -0,0 +1,454 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+#include "igbvf_vf.h"
+
+
+static s32 igbvf_init_mac_params_vf(struct e1000_hw *hw);
+static s32 igbvf_check_for_link_vf(struct e1000_hw *hw);
+static s32 igbvf_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+static s32 igbvf_init_hw_vf(struct e1000_hw *hw);
+static s32 igbvf_reset_hw_vf(struct e1000_hw *hw);
+static void igbvf_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *, u32);
+static void igbvf_rar_set_vf(struct e1000_hw *, u8 *, u32);
+static s32 igbvf_read_mac_addr_vf(struct e1000_hw *);
+
+/**
+ * igbvf_init_mac_params_vf - Inits MAC params
+ * @hw: pointer to the HW structure
+ **/
+static s32 igbvf_init_mac_params_vf(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
+ DEBUGFUNC("igbvf_init_mac_params_vf");
+
+ /* VF's have no MTA Registers - PF feature only */
+ mac->mta_reg_count = 128;
+ /* VF's have no access to RAR entries */
+ mac->rar_entry_count = 1;
+
+ /* Function pointers */
+ /* reset */
+ mac->ops.reset_hw = igbvf_reset_hw_vf;
+ /* hw initialization */
+ mac->ops.init_hw = igbvf_init_hw_vf;
+ /* check for link */
+ mac->ops.check_for_link = igbvf_check_for_link_vf;
+ /* link info */
+ mac->ops.get_link_up_info = igbvf_get_link_up_info_vf;
+ /* multicast address update */
+ mac->ops.update_mc_addr_list = igbvf_update_mc_addr_list_vf;
+ /* set mac address */
+ mac->ops.rar_set = igbvf_rar_set_vf;
+ /* read mac address */
+ mac->ops.read_mac_addr = igbvf_read_mac_addr_vf;
+
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * igbvf_init_function_pointers_vf - Inits function pointers
+ * @hw: pointer to the HW structure
+ **/
+void igbvf_init_function_pointers_vf(struct e1000_hw *hw)
+{
+ DEBUGFUNC("igbvf_init_function_pointers_vf");
+
+ hw->mac.ops.init_params = igbvf_init_mac_params_vf;
+ hw->mbx.ops.init_params = igbvf_init_mbx_params_vf;
+}
+
+/**
+ * igbvf_get_link_up_info_vf - Gets link info.
+ * @hw: pointer to the HW structure
+ * @speed: pointer to 16 bit value to store link speed.
+ * @duplex: pointer to 16 bit value to store duplex.
+ *
+ * Since we cannot read the PHY and get accurate link info, we must rely upon
+ * the status register's data which is often stale and inaccurate.
+ **/
+static s32 igbvf_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 status;
+
+ DEBUGFUNC("igbvf_get_link_up_info_vf");
+
+ status = E1000_READ_REG(hw, E1000_STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ DEBUGOUT("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ DEBUGOUT("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ DEBUGOUT("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ DEBUGOUT("Half Duplex\n");
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * igbvf_reset_hw_vf - Resets the HW
+ * @hw: pointer to the HW structure
+ *
+ * VF's provide a function level reset. This is done using bit 26 of ctrl_reg.
+ * This is all the reset we can perform on a VF.
+ **/
+static s32 igbvf_reset_hw_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 timeout = E1000_VF_INIT_TIMEOUT;
+ s32 ret_val = -E1000_ERR_MAC_INIT;
+ u32 ctrl, msgbuf[3];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ DEBUGFUNC("igbvf_reset_hw_vf");
+
+ DEBUGOUT("Issuing a function level reset to MAC\n");
+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+ /* we cannot reset while the RSTI / RSTD bits are asserted */
+ while (!mbx->ops.check_for_rst(hw, 0) && timeout) {
+ timeout--;
+ usec_delay(5);
+ }
+
+ if (timeout) {
+ /* mailbox timeout can now become active */
+ mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT;
+
+ msgbuf[0] = E1000_VF_RESET;
+ mbx->ops.write_posted(hw, msgbuf, 1, 0);
+
+ msec_delay(10);
+
+ /* set our "perm_addr" based on info provided by PF */
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+ if (!ret_val) {
+ if (msgbuf[0] == (E1000_VF_RESET |
+ E1000_VT_MSGTYPE_ACK))
+ memcpy(hw->mac.perm_addr, addr, 6);
+ else
+ ret_val = -E1000_ERR_MAC_INIT;
+ }
+ }
+
+ return ret_val;
+}
+
+/**
+ * igbvf_init_hw_vf - Inits the HW
+ * @hw: pointer to the HW structure
+ *
+ * Not much to do here except clear the PF Reset indication if there is one.
+ **/
+static s32 igbvf_init_hw_vf(struct e1000_hw *hw)
+{
+ DEBUGFUNC("igbvf_init_hw_vf");
+
+ /* attempt to set and restore our mac address */
+ igbvf_rar_set_vf(hw, hw->mac.addr, 0);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * igbvf_rar_set_vf - set device MAC address
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index receive address array register
+ **/
+static void igbvf_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index __unused)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, 12);
+ msgbuf[0] = E1000_VF_SET_MAC_ADDR;
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
+ /* if nacked the address was rejected, use "perm_addr" */
+ if (!ret_val &&
+ (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
+ igbvf_read_mac_addr_vf(hw);
+}
+
+/**
+ * igbvf_hash_mc_addr_vf - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * igbvf_mta_set_generic()
+ **/
+static u32 igbvf_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ DEBUGFUNC("igbvf_hash_mc_addr_generic");
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /*
+ * The bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * igbvf_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates the Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igbvf_update_mc_addr_list_vf(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[E1000_VFMAILBOX_SIZE];
+ u16 *hash_list = (u16 *)&msgbuf[1];
+ u32 hash_value;
+ u32 i;
+
+ DEBUGFUNC("igbvf_update_mc_addr_list_vf");
+
+ /* Each entry in the list uses 1 16 bit word. We have 30
+ * 16 bit words available in our HW msg buffer (minus 1 for the
+ * msg type). That's 30 hash values if we pack 'em right. If
+ * there are more than 30 MC addresses to add then punt the
+ * extras for now and then add code to handle more than 30 later.
+ * It would be unusual for a server to request that many multi-cast
+ * addresses except for in large enterprise network environments.
+ */
+
+ DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count);
+
+ if (mc_addr_count > 30) {
+ msgbuf[0] |= E1000_VF_SET_MULTICAST_OVERFLOW;
+ mc_addr_count = 30;
+ }
+
+ msgbuf[0] = E1000_VF_SET_MULTICAST;
+ msgbuf[0] |= mc_addr_count << E1000_VT_MSGINFO_SHIFT;
+
+ for (i = 0; i < mc_addr_count; i++) {
+ hash_value = igbvf_hash_mc_addr_vf(hw, mc_addr_list);
+ DEBUGOUT1("Hash value = 0x%03X\n", hash_value);
+ hash_list[i] = hash_value & 0x0FFF;
+ mc_addr_list += ETH_ADDR_LEN;
+ }
+
+ mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE, 0);
+}
+
+/**
+ * igbvf_vfta_set_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vid: determines the vfta register and bit to set/unset
+ * @set: if true then set bit, else clear bit
+ **/
+void igbvf_vfta_set_vf(struct e1000_hw *hw, u16 vid, bool set)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+
+ msgbuf[0] = E1000_VF_SET_VLAN;
+ msgbuf[1] = vid;
+ /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+ if (set)
+ msgbuf[0] |= E1000_VF_SET_VLAN_ADD;
+
+ mbx->ops.write_posted(hw, msgbuf, 2, 0);
+}
+
+/** igbvf_rlpml_set_vf - Set the maximum receive packet length
+ * @hw: pointer to the HW structure
+ * @max_size: value to assign to max frame size
+ **/
+void igbvf_rlpml_set_vf(struct e1000_hw *hw, u16 max_size)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+
+ msgbuf[0] = E1000_VF_SET_LPE;
+ msgbuf[1] = max_size;
+
+ mbx->ops.write_posted(hw, msgbuf, 2, 0);
+}
+
+/**
+ * igbvf_promisc_set_vf - Set flags for Unicast or Multicast promisc
+ * @hw: pointer to the HW structure
+ * @uni: boolean indicating unicast promisc status
+ * @multi: boolean indicating multicast promisc status
+ **/
+s32 igbvf_promisc_set_vf(struct e1000_hw *hw, enum e1000_promisc_type type)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf = E1000_VF_SET_PROMISC;
+ s32 ret_val;
+
+ switch (type) {
+ case e1000_promisc_multicast:
+ msgbuf |= E1000_VF_SET_PROMISC_MULTICAST;
+ break;
+ case e1000_promisc_enabled:
+ msgbuf |= E1000_VF_SET_PROMISC_MULTICAST;
+ case e1000_promisc_unicast:
+ msgbuf |= E1000_VF_SET_PROMISC_UNICAST;
+ case e1000_promisc_disabled:
+ break;
+ default:
+ return -E1000_ERR_MAC_INIT;
+ }
+
+ ret_val = mbx->ops.write_posted(hw, &msgbuf, 1, 0);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, &msgbuf, 1, 0);
+
+ if (!ret_val && !(msgbuf & E1000_VT_MSGTYPE_ACK))
+ ret_val = -E1000_ERR_MAC_INIT;
+
+ return ret_val;
+}
+
+/**
+ * igbvf_read_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 igbvf_read_mac_addr_vf(struct e1000_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < ETH_ADDR_LEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * igbvf_check_for_link_vf - Check for link for a virtual interface
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see if the underlying PF is still talking to the VF and
+ * if it is then it reports the link state to the hardware, otherwise
+ * it reports link down and returns an error.
+ **/
+static s32 igbvf_check_for_link_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = E1000_SUCCESS;
+ u32 in_msg = 0;
+
+ DEBUGFUNC("igbvf_check_for_link_vf");
+
+ /*
+ * We only want to run this if there has been a rst asserted.
+ * in this case that could mean a link change, device reset,
+ * or a virtual function reset
+ */
+
+ /* If we were hit with a reset drop the link */
+ if (!mbx->ops.check_for_rst(hw, 0))
+ mac->get_link_status = true;
+
+ if (!mac->get_link_status)
+ goto out;
+
+ /* if link status is down no point in checking to see if pf is up */
+ if (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU))
+ goto out;
+
+ /* if the read failed it could just be a mailbox collision, best wait
+ * until we are called again and don't report an error */
+ if (mbx->ops.read(hw, &in_msg, 1, 0))
+ goto out;
+
+ /* if incoming message isn't clear to send we are waiting on response */
+ if (!(in_msg & E1000_VT_MSGTYPE_CTS)) {
+ /* message is not CTS and is NACK we have lost CTS status */
+ if (in_msg & E1000_VT_MSGTYPE_NACK)
+ ret_val = -E1000_ERR_MAC_INIT;
+ goto out;
+ }
+
+ /* at this point we know the PF is talking to us, check and see if
+ * we are still accepting timeout or if we had a timeout failure.
+ * if we failed then we will need to reinit */
+ if (!mbx->timeout) {
+ ret_val = -E1000_ERR_MAC_INIT;
+ goto out;
+ }
+
+ /* if we passed all the tests above then the link is up and we no
+ * longer need to check for link */
+ mac->get_link_status = false;
+
+out:
+ return ret_val;
+}
+
diff --git a/src/drivers/net/igbvf/igbvf_vf.h b/src/drivers/net/igbvf/igbvf_vf.h
new file mode 100644
index 0000000..94cf53a
--- /dev/null
+++ b/src/drivers/net/igbvf/igbvf_vf.h
@@ -0,0 +1,345 @@
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics at intel.com>
+ e1000-devel Mailing List <e1000-devel at lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+FILE_LICENCE ( GPL2_ONLY );
+
+#ifndef _IGBVF_VF_H_
+#define _IGBVF_VF_H_
+
+#include <stddef.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <byteswap.h>
+#include <errno.h>
+#include <ipxe/pci.h>
+#include <ipxe/malloc.h>
+#include <ipxe/if_ether.h>
+#include <ipxe/io.h>
+#include <ipxe/ethernet.h>
+#include <ipxe/iobuf.h>
+#include <ipxe/netdevice.h>
+
+#include "igbvf_osdep.h"
+#include "igbvf_regs.h"
+#include "igbvf_defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576_VF 0x10CA
+
+#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
+
+/* Additional Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000
+#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
+
+#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
+
+/* Interrupt Defines */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + ((_n) << 2))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+#define E1000_IVAR_VALID 0x80
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+ struct {
+ u64 pkt_addr; /* Packet buffer address */
+ u64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ union {
+ u32 data;
+ struct {
+ u16 pkt_info; /* RSS type, Packet type */
+ u16 hdr_info; /* Split Header,
+ * header buffer length */
+ } hs_rss;
+ } lo_dword;
+ union {
+ u32 rss; /* RSS Hash */
+ struct {
+ u16 ip_id; /* IP id */
+ u16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ u32 status_error; /* ext status/error */
+ u16 length; /* Packet length */
+ u16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+ struct {
+ u64 buffer_addr; /* Address of descriptor's data buf */
+ u32 cmd_type_len;
+ u32 olinfo_status;
+ } read;
+ struct {
+ u64 rsvd; /* Reserved */
+ u32 nxtseq_seed;
+ u32 status;
+ } wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+ u32 vlan_macip_lens;
+ u32 seqnum_seed;
+ u32 type_tucmd_mlhl;
+ u32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+
+enum e1000_mac_type {
+ e1000_undefined = 0,
+ e1000_vfadapt,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
+};
+
+struct e1000_vf_stats {
+ u64 base_gprc;
+ u64 base_gptc;
+ u64 base_gorc;
+ u64 base_gotc;
+ u64 base_mprc;
+ u64 base_gotlbc;
+ u64 base_gptlbc;
+ u64 base_gorlbc;
+ u64 base_gprlbc;
+
+ u32 last_gprc;
+ u32 last_gptc;
+ u32 last_gorc;
+ u32 last_gotc;
+ u32 last_mprc;
+ u32 last_gotlbc;
+ u32 last_gptlbc;
+ u32 last_gorlbc;
+ u32 last_gprlbc;
+
+ u64 gprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 mprc;
+ u64 gotlbc;
+ u64 gptlbc;
+ u64 gorlbc;
+ u64 gprlbc;
+};
+
+#include "igbvf_mbx.h"
+
+struct e1000_mac_operations {
+ /* Function pointers for the MAC. */
+ s32 (*init_params)(struct e1000_hw *);
+ s32 (*check_for_link)(struct e1000_hw *);
+ void (*clear_vfta)(struct e1000_hw *);
+ s32 (*get_bus_info)(struct e1000_hw *);
+ s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
+ void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ s32 (*setup_link)(struct e1000_hw *);
+ void (*write_vfta)(struct e1000_hw *, u32, u32);
+ void (*mta_set)(struct e1000_hw *, u32);
+ void (*rar_set)(struct e1000_hw *, u8*, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+};
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum e1000_mac_type type;
+
+ u16 mta_reg_count;
+ u16 rar_entry_count;
+
+ bool get_link_status;
+};
+
+enum e1000_bus_type {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_5000,
+ e1000_bus_speed_reserved
+};
+
+enum e1000_bus_width {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_pcie_x1,
+ e1000_bus_width_pcie_x2,
+ e1000_bus_width_pcie_x4 = 4,
+ e1000_bus_width_pcie_x8 = 8,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+};
+
+struct e1000_bus_info {
+ enum e1000_bus_type type;
+ enum e1000_bus_speed speed;
+ enum e1000_bus_width width;
+
+ u16 func;
+ u16 pci_cmd_word;
+};
+
+struct e1000_mbx_operations {
+ s32 (*init_params)(struct e1000_hw *hw);
+ s32 (*read)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*check_for_msg)(struct e1000_hw *, u16);
+ s32 (*check_for_ack)(struct e1000_hw *, u16);
+ s32 (*check_for_rst)(struct e1000_hw *, u16);
+};
+
+struct e1000_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct e1000_mbx_info {
+ struct e1000_mbx_operations ops;
+ struct e1000_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u16 size;
+};
+
+struct e1000_dev_spec_vf {
+ u32 vf_number;
+ u32 v2p_mailbox;
+};
+
+struct e1000_hw {
+ void *back;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ unsigned long io_base;
+
+ struct e1000_mac_info mac;
+ struct e1000_bus_info bus;
+ struct e1000_mbx_info mbx;
+
+ union {
+ struct e1000_dev_spec_vf vf;
+ } dev_spec;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+};
+
+enum e1000_promisc_type {
+ e1000_promisc_disabled = 0, /* all promisc modes disabled */
+ e1000_promisc_unicast = 1, /* unicast promiscuous enabled */
+ e1000_promisc_multicast = 2, /* multicast promiscuous enabled */
+ e1000_promisc_enabled = 3, /* both uni and multicast promisc */
+ e1000_num_promisc_types
+};
+
+/* These functions must be implemented by drivers */
+s32 igbvf_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+void igbvf_vfta_set_vf(struct e1000_hw *, u16, bool);
+void igbvf_rlpml_set_vf(struct e1000_hw *, u16);
+s32 igbvf_promisc_set_vf(struct e1000_hw *, enum e1000_promisc_type);
+#endif /* _IGBVF_VF_H_ */
diff --git a/src/include/ipxe/errfile.h b/src/include/ipxe/errfile.h
index 7472414..2d0422e 100644
--- a/src/include/ipxe/errfile.h
+++ b/src/include/ipxe/errfile.h
@@ -135,6 +135,7 @@ FILE_LICENCE ( GPL2_OR_LATER );
#define ERRFILE_jme ( ERRFILE_DRIVER | 0x005b0000 )
#define ERRFILE_virtio_net ( ERRFILE_DRIVER | 0x005c0000 )
#define ERRFILE_tap ( ERRFILE_DRIVER | 0x005d0000 )
+#define ERRFILE_igbvf_main ( ERRFILE_DRIVER | 0x005e0000 )
#define ERRFILE_scsi ( ERRFILE_DRIVER | 0x00700000 )
#define ERRFILE_arbel ( ERRFILE_DRIVER | 0x00710000 )
More information about the ipxe-devel
mailing list