<p dir="ltr">I´m on the go so quick reply... undionly.kpxe and ipxe.pxe are both pxe NBPs so you can switch them for each other.. prebuilt ones can be found at <a href="http://boot.ipxe.org">boot.ipxe.org</a></p>
<div class="gmail_quote">On 20 Dec 2016 12:59, "Esben Storgaard Nielsen" <<a href="mailto:esn@solar.dk">esn@solar.dk</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Again,<br>
<br>
First, I'm sorry, Forgot to inform you about the bios versions.<br>
I have try it with two version<br>
<br>
Lenovo T460P 20FX-S08L00 - With Bios 2.12 (R07ET72W) ECP 1.04 (R07HT14W)<br>
Lenovo T460P 20FX-S17500 - With Bios 2.11 (R07ET71W) ECP 1.04 (R07HT14W)<br>
<br>
A the moment, I don't have access to an image sharing site, but if necessary I can created one temporally.<br>
<br>
If I shall switch to ipxe.pxe, can I still have my menu for chainloading?<br>
And on (h)ttp://<a href="http://ipxe.org" rel="noreferrer" target="_blank">ipxe.org</a> I can't find any documentation how to use ipxe.pxe instead undionly.ipxe<br>
<br>
On (h)ttp://<a href="http://ipxe.org/download" rel="noreferrer" target="_blank">ipxe.org/download</a>, can I only find a link to the iso file, and the source code, for the .usb file, it tells me to build by myself!<br>
<br>
I can create a virtual computer, but I don't know how to build, so I have used you build.<br>
I have attached a screen shot, from a pxe boot with you kpxe file, and reduced the size to lowest possible.<br>
<br>
I don't know where you are located physically, but if you need access to a virtual computer, then I have access the following remote sharing tools<br>
WebEx, TeamViewer and Skype.<br>
<br>
<br>
<br>
Med venlig hilsen / Kind regards,<br>
<br>
Esben Storgaard Nielsen<br>
Systems Administrator, Server<br>
<br>
Solar A/S<br>
Industrivej Vest 43<br>
6600 Vejen<br>
<br>
Phone Direct <a href="tel:%2B45%2079300314" value="+4579300314">+45 79300314</a><br>
Fax<br>
Mobile <a href="tel:%2B45%2040342836" value="+4540342836">+45 40342836</a><br>
E-mail <a href="mailto:esn@solar.dk">esn@solar.dk</a><br>
Internet <a href="http://www.solar.eu" rel="noreferrer" target="_blank">www.solar.eu</a><br>
-----Original Message-----<br>
From: Christian Nilsson [mailto:<a href="mailto:nikize@gmail.com">nikize@gmail.com</a>]<br>
Sent: 19. december 2016 19:01<br>
To: Esben Storgaard Nielsen <<a href="mailto:esn@solar.dk">esn@solar.dk</a>><br>
Cc: Richard Moore <<a href="mailto:rich@richud.com">rich@richud.com</a>>; iPXE Developer List <<a href="mailto:ipxe-devel@ipxe.org">ipxe-devel@ipxe.org</a>><br>
Subject: RE: [ipxe-devel] I have a trouble booting iPXE from a specific laptop<br>
<br>
Hi again,<br>
The list is limited to a few hundred kb, so we should keep emails below that, images are super helpful, but if possible put them on some image sharing site if possible.<br>
<br>
We can see that undionly.kpxe are unable to receive anything (we see that on the [Link:up, TX:4 TXE:1 RX:0 RXE:0] line due to 0 on RX:)<br>
<br>
We can also see that ipxe.lkrn that is loaded via iso works just fine.<br>
(because dhcp is ok and TX and RX is not zero) The "errors" you see from ifstat in this is more informational then errors.<br>
<br>
I would suggest you test and switch to ipxe.pxe instead which seems to work at-least on this machine, the question is if you have something else where it does not work. (where ipxe has no native drivers for the nic and there is only UNDI to use)<br>
<br>
To debug the original issue you should build with make bin/undionly.kpxe DEBUG=undi,undinet (this is why i earlier mentioned that you should have a build machine, it could be a virtual machine so not much effort is really needed - but for ease of access if you are unable to to do so i built one which you can find at <a href="https://b800.org/undionly.undidbg.kpxe" rel="noreferrer" target="_blank">https://b800.org/undionly.<wbr>undidbg.kpxe</a> )<br>
<br>
So far we know that the NIC works just fine with iPXE intel driver (DHCP fine), and it is quite certain that Lenovo has a bug in their BIOS/firmware/NIC ROM build. With the output from above debug build iPXE might be able to implement a workaround.<br>
<br>
I personally can't get hold of a T460P which I was hoping for, but it would still be interesting to know which version of the bios this machine has?<br>
<br>
<br>
As a side note, to use the .usb file for usb you could use something like Win32DiskImager, but likely the same tool you used to "copy" the iso to usb supports raw .usb copy as well.<br>
<br>
/Christian<br>
<br>
On 15 Dec 2016 14:58, "Esben Storgaard Nielsen" <<a href="mailto:esn@solar.dk">esn@solar.dk</a>> wrote:<br>
><br>
> Hi Christian<br>
><br>
> I have attached a picture where I press CTRL-B -> DHCP -> IFSTAT<br>
><br>
> I'm a windows user, and not familiar with Linux, so I can't create a USB drive from the source files.<br>
><br>
> And there is no CD-Rom drive in the computer, but I have created a USB boot drive from the iPXE.iso file.<br>
> And that boot seems to work!<br>
><br>
><br>
> Med venlig hilsen / Kind regards,<br>
><br>
> Esben Storgaard Nielsen<br>
> Systems Administrator, Server<br>
><br>
> Solar A/S<br>
> Industrivej Vest 43<br>
> 6600 Vejen<br>
><br>
> Phone Direct <a href="tel:%2B45%2079300314" value="+4579300314">+45 79300314</a><br>
> Fax<br>
> Mobile <a href="tel:%2B45%2040342836" value="+4540342836">+45 40342836</a><br>
> E-mail <a href="mailto:esn@solar.dk">esn@solar.dk</a><br>
> Internet <a href="http://www.solar.eu" rel="noreferrer" target="_blank">www.solar.eu</a><br>
> -----Original Message-----<br>
> From: Christian Nilsson [mailto:<a href="mailto:nikize@gmail.com">nikize@gmail.com</a>]<br>
> Sent: 14. december 2016 19:17<br>
> To: Esben Storgaard Nielsen <<a href="mailto:esn@solar.dk">esn@solar.dk</a>><br>
> Cc: Richard Moore <<a href="mailto:rich@richud.com">rich@richud.com</a>>; iPXE Developer List<br>
> <<a href="mailto:ipxe-devel@ipxe.org">ipxe-devel@ipxe.org</a>><br>
> Subject: Re: [ipxe-devel] I have a trouble booting iPXE from a<br>
> specific laptop<br>
><br>
> Hi,<br>
> Your picture shows "Configuring (net0 xx:xx:xx:xx:xx:xx)....", while<br>
> in the forum post the nic is not detected at all (at least the<br>
> included text does not show it, maybe that was just not included in<br>
> the forum post, other then that it looks similar - but nic found or<br>
> not is a big difference)<br>
><br>
> Official build shows (26050) which is as of right now the latest so that is good.<br>
><br>
> You wrote that they are on slow link, it should not matter but is it connected to a gigabit port or 100mbit? could you try the other?<br>
><br>
> in that image we also see ifstat with "[Link:up, TX:0 TXE:1 RX:0 RXE:0]"<br>
> Could we get a pure undionly.kpxe chain boot where ctrl-b is used to get into shell instead of using any script followed by typing dhcp and then ifstat - that way we see what gives what. The interesting part is whater or not we get any kind of RX or RXE at all.<br>
><br>
> it would also be interesting if you could test official ipxe.pxe or ipxe.usb and see whether or not that works, just to narrow down where the issue is.<br>
><br>
> I will also try to see if i can get my hands on a T460P and test this myself. - could you get which bios version your machines is loaded with?<br>
><br>
> /Christian<br>
><br>
> On Wed, Dec 14, 2016 at 10:34 AM, Esben Storgaard Nielsen <<a href="mailto:esn@solar.dk">esn@solar.dk</a>> wrote:<br>
> > Hi All<br>
> ><br>
> > Thank you for trying helping me, solving this issue.<br>
> ><br>
> > I will try to answer all of you mails, I'm from Denmark, I just arrived at my job today.<br>
> ><br>
> > @ Christians first mail<br>
> ><br>
> > I our environment we have about 100 different subnets, and lot of them are on slow link.<br>
> > We use Microsoft SCCM for handling client OS, so to ensure we use<br>
> > http instead of tftp we use undionly.kpxe We also use it for adding<br>
> > other boot options, I have attached a menu sample, used on<br>
> > rom-o-matic<br>
> ><br>
> > @ the specific Lenovo model, it is a Lenovo T460P 20FX-S08L00 and<br>
> > 20FX-S17500<br>
> ><br>
> > @ the link I posted <a href="http://forum.ipxe.org/showthread.php?tid=7713&highlight=i219" rel="noreferrer" target="_blank">http://forum.ipxe.org/<wbr>showthread.php?tid=7713&<wbr>highlight=i219</a> it look exact the same on my computer, I have attached a picture of the boot screen.<br>
> ><br>
> > @ Officially build undionly.kpxe have I attached a picture<br>
> ><br>
> > @ I have a machine for testing, and a subnet where I can change the pxe boot options, but I'm a technician so I'm not expert on building software by myself.<br>
> ><br>
> > @ Richards mail<br>
> > I have tried to fully discharge the computer.<br>
> ><br>
> ><br>
> > Med venlig hilsen / Kind regards,<br>
> ><br>
> > Esben Storgaard Nielsen<br>
> > Systems Administrator, Server<br>
> ><br>
> > Solar A/S<br>
> > Industrivej Vest 43<br>
> > 6600 Vejen<br>
> ><br>
> > Phone Direct <a href="tel:%2B45%2079300314" value="+4579300314">+45 79300314</a><br>
> > Fax<br>
> > Mobile <a href="tel:%2B45%2040342836" value="+4540342836">+45 40342836</a><br>
> > E-mail <a href="mailto:esn@solar.dk">esn@solar.dk</a><br>
> > Internet <a href="http://www.solar.eu" rel="noreferrer" target="_blank">www.solar.eu</a><br>
> > -----Original Message-----<br>
> > From: Christian Nilsson [mailto:<a href="mailto:nikize@gmail.com">nikize@gmail.com</a>]<br>
> > Sent: 13. december 2016 20:39<br>
> > To: Richard Moore <<a href="mailto:rich@richud.com">rich@richud.com</a>><br>
> > Cc: Esben Storgaard Nielsen <<a href="mailto:esn@solar.dk">esn@solar.dk</a>>; iPXE Developer List<br>
> > <<a href="mailto:ipxe-devel@ipxe.org">ipxe-devel@ipxe.org</a>><br>
> > Subject: Re: [ipxe-devel] I have a trouble booting iPXE from a<br>
> > specific laptop<br>
> ><br>
> > Just in case it was unclear: if undionly.kpxe is used then what is in the intel.c driver does not matter since undionly means what it says, only the PXE UNDI stack is use.<br>
> ><br>
> > in case ipxe.pxe is used instead than that flag can make a difference but so far I have only seen that flag affect link speed and not link up, so on some intel nic that flag is needed to enable gigabit linkup (sometimes but not always), otherwise it might end up on only 10mbit link instead.<br>
> ><br>
> > On Tue, Dec 13, 2016 at 8:13 PM, Richard Moore <<a href="mailto:rich@richud.com">rich@richud.com</a>> wrote:<br>
> >> Hi Esben,<br>
> >><br>
> >> The git master (rom-o-matic) uses has this in intel.c<br>
> >><br>
> >> PCI_ROM ( 0x8086, 0x15b7, "i219lm-2", "I219-LM (2)", 0 ),<br>
> >><br>
> >> it probably needs to be<br>
> >><br>
> >> PCI_ROM ( 0x8086, 0x15b7, "i219lm-2", "I219-LM (2)",<br>
> >> INTEL_NO_PHY_RST ),<br>
> >><br>
> >><br>
> >> ...otherwise it wont work in some machines with that chip (out of 4<br>
> >> different types of HP machines I tested with, one needs<br>
> >> INTEL_NO_PHY_RST and other three are ok)<br>
> >><br>
> >><br>
> >> You will need to build yours from source (changing that line) and<br>
> >> try it, rather than use rom-o-matic.<br>
> >><br>
> >><br>
> >><br>
> >> Cheers<br>
> >><br>
> >> Rich<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> On Tue, 2016-12-13 at 15:08 +0000, Esben Storgaard Nielsen wrote:<br>
> >><br>
> >> Hi again<br>
> >><br>
> >><br>
> >> If i look in the net card setup menu, I can see a small diference<br>
> >><br>
> >> T460P PCI ID 8086/15B7/17AA/5050/31 Don't work<br>
> >> T460 PCI ID 8086/156F/17AA/2233/21 Works<br>
> >><br>
> >><br>
> >> Med venlig hilsen / Kind regards,<br>
> >><br>
> >> Esben Storgaard Nielsen<br>
> >> Systems Administrator, Server<br>
> >><br>
> >> Solar A/S<br>
> >> Industrivej Vest 43<br>
> >> 6600 Vejen<br>
> >><br>
> >> Phone Direct +45 79300314<br>
> >> Fax<br>
> >> Mobile +45 40342836<br>
> >> E-mail <a href="mailto:esn@solar.dk">esn@solar.dk</a><br>
> >> Internet <a href="http://www.solar.eu" rel="noreferrer" target="_blank">www.solar.eu</a><br>
> >><br>
> >> -----Original Message-----<br>
> >> From: Richard Moore [mailto:<a href="mailto:rich@richud.com">rich@richud.com</a>]<br>
> >> Sent: 13. december 2016 15:18<br>
> >> To: Esben Storgaard Nielsen <<a href="mailto:esn@solar.dk">esn@solar.dk</a>><br>
> >> Subject: Re: [ipxe-devel] I have a trouble booting iPXE from a<br>
> >> specific laptop<br>
> >><br>
> >> Check the net card's hardware dev/ven are in here,<br>
> >> src/drivers/net/intel.c<br>
> >><br>
> >> Should be something like<br>
> >><br>
> >><br>
> >> PCI_ROM ( 0x8086, 0x15a0, "i218lm-2", "I218-LM", INTEL_NO_PHY_RST ),<br>
> >> PCI_ROM ( 0x8086, 0x15a1, "i218v-2", "I218-V", 0 ),<br>
> >> PCI_ROM ( 0x8086, 0x15a2, "i218lm-3", "I218-LM", INTEL_NO_PHY_RST ),<br>
> >> PCI_ROM ( 0x8086, 0x15a3, "i218v-3", "I218-V", INTEL_NO_PHY_RST ),<br>
> >> PCI_ROM ( 0x8086, 0x15b7, "i219lm-2", "I219-LM (2)", INTEL_NO_PHY_RST ),<br>
> >> PCI_ROM ( 0x8086, 0x15b8, "i219v-2", "I219-V (2)", 0 ),<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> Cheers<br>
> >><br>
> >> Rich<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> Hi Again<br>
> >><br>
> >> I still have some trouble bootin iPXE from 1 type of computer.<br>
> >> Lenovo tells me, that they can’t help because the net card<br>
> >> isn’t on a compatibility list from iPXE.<br>
> >> That’s correct, <a href="http://ipxe.org/appnote/hardware_drivers" rel="noreferrer" target="_blank">http://ipxe.org/appnote/<wbr>hardware_drivers</a><br>
> >><br>
> >> The net card used is an “Intel i219LM“<br>
> >><br>
> >> I use undionly.kpxe and use the site <a href="https://rom-o-matic.eu/" rel="noreferrer" target="_blank">https://rom-o-matic.eu/</a> for<br>
> >> building my file, and here is the net card is presented on the net<br>
> >> card list.<br>
> >> So I think that the compatibility list isn’t updated.<br>
> >><br>
> >> I can see on the FAQ forum that the problem has being reported once<br>
> >> before.<br>
> >> <a href="http://forum.ipxe.org/showthread.php?tid=7713&highlight=i219" rel="noreferrer" target="_blank">http://forum.ipxe.org/<wbr>showthread.php?tid=7713&<wbr>highlight=i219</a><br>
> >><br>
> >> I can’t see where I can try the suggestion, there is no option in<br>
> >> the advance section on <a href="http://rom-o-matic.eu" rel="noreferrer" target="_blank">rom-o-matic.eu</a><br>
> >><br>
> >><br>
> >> Could you came with some suggestions, so I can get further with<br>
> >> this task.<br>
> >><br>
> >><br>
> >> Med venlig hilsen / Kind regards,<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> Esben Storgaard Nielsen<br>
> >> Systems Administrator, Server<br>
> >><br>
> >> [<a href="http://emailsignature.solar.eu/General/Solar_Logo.jpg" rel="noreferrer" target="_blank">http://emailsignature.solar.<wbr>eu/General/Solar_Logo.jpg</a>]<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> Phone Direct <a href="tel:%2B45%2079300314" value="+4579300314">+45 79300314</a><br>
> >> Mobile <a href="tel:%2B45%2040342836" value="+4540342836">+45 40342836</a><br>
> >> E-mail <a href="mailto:esn@solar.dk">esn@solar.dk</a><mailto:<a href="mailto:esn@solar.dk">esn@solar.<wbr>dk</a>><br>
> >> Internet <a href="http://www.solar.eu" rel="noreferrer" target="_blank">www.solar.eu</a><<a href="http://www.solar.eu/" rel="noreferrer" target="_blank">http://www.solar.<wbr>eu/</a>><br>
> >><br>
> >><br>
> >><br>
> >> Solar A/S<br>
> >> Industrivej Vest 43<br>
> >> 6600 Vejen<br>
> >> Phone 79 30 00 00<br>
> >><br>
> >><br>
> >> From: Christian Nilsson [mailto:<a href="mailto:nikize@gmail.com">nikize@gmail.com</a>]<br>
> >> Sent: 25. november 2016 01:11<br>
> >> To: Esben Storgaard Nielsen <<a href="mailto:esn@solar.dk">esn@solar.dk</a>><br>
> >> Cc: <a href="mailto:ipxe-devel@lists.ipxe.org">ipxe-devel@lists.ipxe.org</a><br>
> >> Subject: Re: [ipxe-devel] I have a trouble booting iPXE from a<br>
> >> specific laptop<br>
> >><br>
> >> In the image it looks like you have BIOS doing PXE DHCP request,<br>
> >> getting response and loading some version of ipxe.<br>
> >> After that you should have another DHCP request but this time from<br>
> >> iPXE, is this second dhcp request seen by the dhcp server?<br>
> >><br>
> >> The ipxe in the image is missing the "git version id" please make<br>
> >> sure you have the latest version of ipxe git master and that the<br>
> >> git version id is shown when booting.<br>
> >><br>
> >> One thing that might be interesting is if you press ctrl-b to get<br>
> >> the iPXE shell and then type dhcp enter followed by ifstat to get<br>
> >> some info about nic driver and how it looks in regards to packets<br>
> >> received and sent and any possible error.<br>
> >><br>
> >> You are using ipxe.pxe? have you tried undionly.kpxe instead?<br>
> >><br>
> >> /Christian<br>
> >><br>
> >> On Thu, Nov 24, 2016 at 11:37 AM, Esben Storgaard Nielsen<br>
> >> <<a href="mailto:esn@solar.dk">esn@solar.dk</a><mailto:<a href="mailto:esn@solar.dk">esn@<wbr>solar.dk</a>>> wrote:<br>
> >> Hi<br>
> >><br>
> >> We using IPXE to boot our SCCM boot image, and its works very fine.<br>
> >><br>
> >> But now we got at strange issue, with a new Lenovo T460P laptop.<br>
> >><br>
> >> When we try booting PXE, I got a ip address, and it contact the<br>
> >> iPXE server, and on the tftp log, we can see it sends the boot menu<br>
> >> file, but nothing happens on the laptop.<br>
> >> When we use the T460 there is no problems.<br>
> >> And both computers have the same net card.<br>
> >><br>
> >> Any suggestions to solve my issue?<br>
> >><br>
> >> I have attached a picture of the failure computer.<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> Med venlig hilsen / Kind regards,<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> Esben Storgaard Nielsen<br>
> >> Systems Administrator, Server<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> Phone Direct <a href="tel:%2B45%2079300314" value="+4579300314">+45 79300314</a><tel:%2B45%2079300314><br>
> >> Mobile <a href="tel:%2B45%2040342836" value="+4540342836">+45 40342836</a><tel:%2B45%2040342836><br>
> >> E-mail <a href="mailto:esn@solar.dk">esn@solar.dk</a><mailto:<a href="mailto:esn@solar.dk">esn@solar.<wbr>dk</a>><br>
> >> Internet <a href="http://www.solar.eu" rel="noreferrer" target="_blank">www.solar.eu</a><<a href="http://www.solar.eu/" rel="noreferrer" target="_blank">http://www.solar.<wbr>eu/</a>><br>
> >><br>
> >><br>
> >><br>
> >> Solar A/S<br>
> >> Industrivej Vest 43<br>
> >> 6600 Vejen<br>
> >> Phone 79 30 00 00<br>
> >><br>
> >> <<a href="http://www.linkedin.com/company/14368?trk=tyah&trkInfo=tas%3Asolar" rel="noreferrer" target="_blank">http://www.linkedin.com/<wbr>company/14368?trk=tyah&<wbr>trkInfo=tas%3Asolar</a><br>
> >> %2<br>
> >> 0<br>
> >> A%2FS%2Cidx%3A1-1-1><br>
> >><br>
> >><br>
> >> <<a href="http://www.linkedin.com/company/14368?trk=tyah&trkInfo=tas%3Asolar" rel="noreferrer" target="_blank">http://www.linkedin.com/<wbr>company/14368?trk=tyah&<wbr>trkInfo=tas%3Asolar</a><br>
> >> %2<br>
> >> 0<br>
> >> A%2FS%2Cidx%3A1-1-1><br>
> >><br>
> >><br>
> >> <<a href="http://www.linkedin.com/company/14368?trk=tyah&trkInfo=tas%3Asolar" rel="noreferrer" target="_blank">http://www.linkedin.com/<wbr>company/14368?trk=tyah&<wbr>trkInfo=tas%3Asolar</a><br>
> >> %2<br>
> >> 0<br>
> >> A%2FS%2Cidx%3A1-1-1><br>
> >><br>
> >><br>
> >><br>
> >> <<a href="http://www.linkedin.com/company/14368?trk=tyah&trkInfo=tas%3Asolar" rel="noreferrer" target="_blank">http://www.linkedin.com/<wbr>company/14368?trk=tyah&<wbr>trkInfo=tas%3Asolar</a><br>
> >> %2<br>
> >> 0<br>
> >> A%2FS%2Cidx%3A1-1-1><br>
> >><br>
> >> ______________________________<wbr>_________________<br>
> >> ipxe-devel mailing list<br>
> >> <a href="mailto:ipxe-devel@lists.ipxe.org">ipxe-devel@lists.ipxe.org</a><br>
> >> <a href="https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel" rel="noreferrer" target="_blank">https://lists.ipxe.org/<wbr>mailman/listinfo.cgi/ipxe-<wbr>devel</a><<a href="http://www.l" rel="noreferrer" target="_blank">http://www.l</a><br>
> >> in<br>
> >> k<br>
> >> <a href="http://edin.com/company/14368?trk=tyah&trkInfo=tas%3Asolar%20A%2FS%2Cidx%3" rel="noreferrer" target="_blank">edin.com/company/14368?trk=<wbr>tyah&trkInfo=tas%3Asolar%20A%<wbr>2FS%2Cidx%3</a><br>
> >> A1<br>
> >> -<br>
> >> 1-1><br>
> >> <<a href="http://www.linkedin.com/company/14368?trk=tyah&trkInfo=tas%3Asolar" rel="noreferrer" target="_blank">http://www.linkedin.com/<wbr>company/14368?trk=tyah&<wbr>trkInfo=tas%3Asolar</a><br>
> >> %2<br>
> >> 0 A%2FS%2Cidx%3A1-1-1><br>
> >> ______________________________<wbr>_________________<br>
> >> ipxe-devel mailing list<br>
> >> <a href="mailto:ipxe-devel@lists.ipxe.org">ipxe-devel@lists.ipxe.org</a><br>
> >> <a href="https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel" rel="noreferrer" target="_blank">https://lists.ipxe.org/<wbr>mailman/listinfo.cgi/ipxe-<wbr>devel</a><br>
> >><br>
> >><br>
> >><br>
> >><br>
</blockquote></div>