<div dir="ltr"><div>I'm trying to use iPXE with an LACP setup on a Foundry GS648P switch. The switch is setup in active mode (a requirement for iPXE if I understand correct). I'm not exactly sure what's going on because I'm not sure how to determine what packets are getting sent back and forth, but the switch reports the LACP links as being inactive (not down which is what happens when nothing's plugged in).<br><br></div>Any suggestions? In particular what can I do to further diagnose this issue (can I watch packets that iPXE is sending/receiving)? I'm using the iPXE cdrom at the moment.<br><div><br>Alex<br></div></div>