<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/4.6.0">
</HEAD>
<BODY>
On Mon, 2012-11-12 at 11:28 +0100, Robin Smidsrød wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
On 12.11.2012 09:47, Richard Moore wrote:
<FONT COLOR="#737373">> Attached are the two dumps requested from Robin. </FONT>
<FONT COLOR="#737373">> </FONT>
<FONT COLOR="#737373">> [The laptop is directly wired to my machine running dnsmasq so only</FONT>
<FONT COLOR="#737373">> traffic between them both is there i.e. left it unfiltered] </FONT>
Perfect setup. Very easy to debug. :)
<FONT COLOR="#737373">> Version from Nov 2nd (of git clone git://git.ipxe.org/ipxe.git) with no</FONT>
<FONT COLOR="#737373">> modifications to source.</FONT>
<FONT COLOR="#737373">> </FONT>
<FONT COLOR="#737373">> I did have a script embedded in the .lkrn to speedup testing which just</FONT>
<FONT COLOR="#737373">> sets dhcp options 209/210 and pulls pxelinux.0 down.</FONT>
I notice the .lkrn pulls down pxelinux.0 on the first DHCP request,
which is consistent with a chainloading setup. How do you load it? From
USB or CD using Grub or ISOLINUX? You are aware of ipxe.usb and ipxe.iso
that are specifically designed for that purpose? Just want to make sure
I understand your setup correctly.
</PRE>
</BLOCKQUOTE>
<BR>
yes it is chainloaded from extlinux(syslinux), from my bootable utils <BR>
USB stick that does lots of other things too <IMG SRC="cid:1352718974.11712.20.camel@8200elite" ALIGN="middle" ALT=":)" BORDER="0"><BR>
<BR>
<BLOCKQUOTE TYPE=CITE>
<PRE>
One question: Any particular reason you're using undionly.kkpxe instead
of undionly.kpxe? The .kkpxe version is usually only used in cases where
people have buggy BIOSes.
</PRE>
</BLOCKQUOTE>
<BR>
Sorry just happened to have been testing with kkpxe and forgot to change it to kpxe, <BR>
but makes no difference in this case. It is now back to kpxe.<BR>
<BR>
<BLOCKQUOTE TYPE=CITE>
<PRE>
It does seem like you're having problems receiving packets when using
undionly.kkpxe. Adding DEBUG=undinet to the make command-line might
reveal some further information about what's happening to those packets.
You might have to enable serial debugging to get them, or use a camera
to take a picture of the screen.
</PRE>
</BLOCKQUOTE>
<BR>
sorry I need a new phone, but I think it is legible enough :)<BR>
<BR>
<IMG SRC="cid:1352718884.11712.18.camel@8200elite" ALIGN="bottom" BORDER="0"><BR>
<BR>
<BLOCKQUOTE TYPE=CITE>
<PRE>
Hopefully with this information someone else can chime in with some
suggestions on what might be wrong...
-- Robin
</PRE>
</BLOCKQUOTE>
<BR>
</BODY>
</HTML>