<HTML><HEAD>
<META content="text/html; charset=utf-8" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19170"></HEAD>
<BODY style="MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">
<DIV>Hello</DIV>
<DIV> </DIV>
<DIV>I have to fake the mac address for ipxe-boot. </DIV>
<DIV>For this I will do in the ipxe script:</DIV>
<DIV>ifclose net0</DIV>
<DIV>set net0/mac 00:30:59:08:00:4C</DIV>
<DIV>ifopen net0</DIV>
<DIV>dhcp net0</DIV>
<DIV> </DIV>
<DIV>Then I become an Connection timed out. But before I do this, the dhcp works.</DIV>
<DIV>Can you help me please</DIV>
<DIV> </DIV>
<DIV>Regards</DIV>
<DIV>Robin</DIV>
<DIV> </DIV>
<DIV>This are the debug message of this:</DIV>
<DIV> </DIV>
<DIV>PCI 00:00.0 (8086:8100) has no driver<BR>PCI 00:02.0 (8086:8108) has no driver<BR>PCI 00:1b.0 (8086:811b) has no driver<BR>PCI 00:1c.0 (8086:8110) has no driver<BR>PCI 00:1c.1 (8086:8112) has no driver<BR>PCI 00:1d.0 (8086:8114) has no driver<BR>PCI 00:1d.1 (8086:8115) has no driver<BR>PCI 00:1d.2 (8086:8116) has no driver<BR>PCI 00:1d.7 (8086:8117) has no driver<BR>PCI 00:1f.0 (8086:8119) has no driver<BR>PCI 00:1f.1 (8086:811a) has no driver<BR>PCI 02:00.0 (1095:3132) has no driver<BR>PCI 03:00.0 (10b5:8505) has no driver<BR>PCI 04:01.0 unhandled 64-bit BAR 0000313100050504<BR>PCI 04:01.0 (10b5:8505) has no driver<BR>PCI 04:02.0 unhandled 64-bit BAR 000001f100060604<BR>PCI 04:02.0 (10b5:8505) has no driver<BR>PCI 04:03.0 unhandled 64-bit BAR 000001f100080704<BR>PCI 04:03.0 (10b5:8505) has no driver<BR>PCI 04:04.0 unhandled 64-bit BAR 0000414100090904<BR>PCI 04:04.0 (10b5:8505) has no driver<BR>PCI 05:00.0 (8086:10d3) has driver "E1000_DEV_ID_82574L"<BR>PCI 05:00.0 has mem d0320000 io 3000 irq 5<BR>PCI 05:00.0 latency timer is unreasonably low at 0. Setting to 32.<BR>Masking off all interrupts<BR>Issuing a global reset to MAC<BR>Masking off all interrupts<BR>Issuing a global reset to MAC<BR>Initializing the IEEE VLAN<BR>Programming MAC Address into RAR[0]<BR>Clearing RAR[1-u]<BR>Zeroing the MTA<BR>After fix-ups FlowControl is now = 0<BR>Reconfiguring auto-neg advertisement params<BR>autoneg_advertised 2f<BR>Advertise 10mb Half duplex<BR>Advertise 10mb Full duplex<BR>Advertise 100mb Half duplex<BR>Advertise 100mb Full duplex<BR>Advertise 1000mb Full duplex<BR>Auto-Neg Advertising 1e1<BR>Restarting Auto-Neg<BR>Valid link established!!!<BR>hw->fc.current_mode = u<BR>Flow Control = NONE.<BR>1000 Mbs, Full Duplex<BR>hw->fc.current_mode = u<BR>Initializing the Flow Control address, type and timer regs<BR>PCI 07:00.0 (10b5:8112) has no driver<BR>PCI 09:00.0 (8086:10d3) has driver "E1000_DEV_ID_82574L"<BR>PCI 09:00.0 has mem d0420000 io 4000 irq 5<BR>PCI 09:00.0 latency timer is unreasonably low at 0. Setting to 32.<BR>Masking off all interrupts<BR>Issuing a global reset to MAC<BR>Masking off all interrupts<BR>Issuing a global reset to MAC<BR>Initializing the IEEE VLAN<BR>Programming MAC Address into RAR[0]<BR>Clearing RAR[1-u]<BR>Zeroing the MTA<BR>After fix-ups FlowControl is now = 0<BR>Reconfiguring auto-neg advertisement params<BR>autoneg_advertised 2f<BR>Advertise 10mb Half duplex<BR>Advertise 10mb Full duplex<BR>Advertise 100mb Half duplex<BR>Advertise 100mb Full duplex<BR>Advertise 1000mb Full duplex<BR>Auto-Neg Advertising 1e1<BR>Restarting Auto-Neg<BR>Valid link established!!!<BR>hw->fc.current_mode = u<BR>Flow Control = NONE.<BR>1000 Mbs, Full Duplex<BR>hw->fc.current_mode = u<BR>Initializing the Flow Control address, type and timer regs<BR>ok</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>iPXE 1.0.0+ -- Open Source Network Boot Firmware -- <A href="http://ipxe.org">http://ipxe.org</A><BR>Features: VLAN HTTP iSCSI DNS TFTP AoE SRP bzImage COMBOOT ELF MBOOT PXE PXEXT</DIV>
<DIV> </DIV>
<DIV>net0: 00:30:59:08:00:62 using E1000_DEV_ID_82574L on PCI05:00.0 (open)<BR> [Link:up, TX:0 TXE:0 RX:0 RXE:0]<BR>DHCP (net0 00:30:59:08:00:62)...... ok<BR>net0: 192.168.71.149/255.255.255.0<BR>Next server: 192.168.71.10<BR>Filename: <A href="http://192.168.71.10/cgi-bin/ipxeboot.py">http://192.168.71.10/cgi-bin/ipxeboot.py</A><BR><A href="http://192.168.71.10/cgi-bin/ipxeboot.py">http://192.168.71.10/cgi-bin/ipxeboot.py</A>... ok<BR>iPXE> ifclose net0<BR>Masking off all interrupts<BR>Issuing a global reset to MAC<BR>Initializing the IEEE VLAN<BR>Programming MAC Address into RAR[0]<BR>Clearing RAR[1-u]<BR>Zeroing the MTA<BR>After fix-ups FlowControl is now = 0<BR>Reconfiguring auto-neg advertisement params<BR>autoneg_advertised 2f<BR>Advertise 10mb Half duplex<BR>Advertise 10mb Full duplex<BR>Advertise 100mb Half duplex<BR>Advertise 100mb Full duplex<BR>Advertise 1000mb Full duplex<BR>Auto-Neg Advertising 1e1<BR>Restarting Auto-Neg<BR>Valid link established!!!<BR>hw->fc.current_mode = u<BR>Flow Control = NONE.<BR>1000 Mbs, Full Duplex<BR>hw->fc.current_mode = u<BR>Initializing the Flow Control address, type and timer regs<BR>iPXE> set net0/mac 00:30:59:08:00:62<BR>iPXE> ifopen net0<BR>iPXE> dhcp net0<BR>DHCP (net0 00:30:59:08:00:62).................. Connection timed out (<A href="http://ipx">http://ipx</A><BR>e.org/4c106035)<BR>Could not configure net0: Connection timed out (<A href="http://ipxe.org/4c106035">http://ipxe.org/4c106035</A>)<BR>Masking off all interrupts<BR>Issuing a global reset to MAC<BR>Initializing the IEEE VLAN<BR>Programming MAC Address into RAR[0]<BR>Clearing RAR[1-u]<BR>Zeroing the MTA<BR>After fix-ups FlowControl is now = 0<BR>Reconfiguring auto-neg advertisement params<BR>autoneg_advertised 2f<BR>Advertise 10mb Half duplex<BR>Advertise 10mb Full duplex<BR>Advertise 100mb Half duplex<BR>Advertise 100mb Full duplex<BR>Advertise 1000mb Full duplex<BR>Auto-Neg Advertising 1e1<BR>Restarting Auto-Neg<BR>Valid link established!!!<BR>hw->fc.current_mode = u<BR>Flow Control = NONE.<BR>1000 Mbs, Full Duplex<BR>hw->fc.current_mode = u<BR>Initializing the Flow Control address, type and timer regs<BR>iPXE></DIV>
<DIV>iPXE> ifstat net0<BR>net0: 00:30:59:08:00:62 using E1000_DEV_ID_82574L on PCI05:00.0 (closed)<BR> [Link:up, TX:16 TXE:1 RX:20 RXE:5]<BR> [TXE: 1 x "No such file or directory (<A href="http://ipxe.org/2d01603b">http://ipxe.org/2d01603b</A>)"]<BR> [RXE: 1 x "Network unreachable (<A href="http://ipxe.org/28056011">http://ipxe.org/28056011</A>)"]<BR> [RXE: 1 x "The socket is not connected (<A href="http://ipxe.org/380f6001">http://ipxe.org/380f6001</A>)"]<BR> [RXE: 3 x "Invalid argument (<A href="http://ipxe.org/1c056002">http://ipxe.org/1c056002</A>)"]<BR>iPXE></DIV>
<DIV>iPXE> ifopen net0<BR>iPXE> ifstat net0<BR>net0: 00:30:59:08:00:62 using E1000_DEV_ID_82574L on PCI05:00.0 (open)<BR> [Link:up, TX:16 TXE:1 RX:20 RXE:5]<BR> [TXE: 1 x "No such file or directory (<A href="http://ipxe.org/2d01603b">http://ipxe.org/2d01603b</A>)"]<BR> [RXE: 1 x "Network unreachable (<A href="http://ipxe.org/28056011">http://ipxe.org/28056011</A>)"]<BR> [RXE: 1 x "The socket is not connected (<A href="http://ipxe.org/380f6001">http://ipxe.org/380f6001</A>)"]<BR> [RXE: 3 x "Invalid argument (<A href="http://ipxe.org/1c056002">http://ipxe.org/1c056002</A>)"]<BR>iPXE> dhcp net0<BR>DHCP (net0 00:30:59:08:00:62).................. Connection timed out (<A href="http://ipx">http://ipx</A><BR>e.org/4c106035)<BR>Could not configure net0: Connection timed out (<A href="http://ipxe.org/4c106035">http://ipxe.org/4c106035</A>)<BR>Masking off all interrupts<BR>Issuing a global reset to MAC<BR>Initializing the IEEE VLAN<BR>Programming MAC Address into RAR[0]<BR>Clearing RAR[1-u]<BR>Zeroing the MTA<BR>After fix-ups FlowControl is now = 0<BR>Reconfiguring auto-neg advertisement params<BR>autoneg_advertised 2f<BR>Advertise 10mb Half duplex<BR>Advertise 10mb Full duplex<BR>Advertise 100mb Half duplex<BR>Advertise 100mb Full duplex<BR>Advertise 1000mb Full duplex<BR>Auto-Neg Advertising 1e1<BR>Restarting Auto-Neg<BR>Valid link established!!!<BR>hw->fc.current_mode = u<BR>Flow Control = NONE.<BR>1000 Mbs, Full Duplex<BR>hw->fc.current_mode = u<BR>Initializing the Flow Control address, type and timer regs<BR>iPXE></DIV><BR>
<div>
<font size="1" face="Arial">The information contained in this document
is CONFIDENTIAL and property of Kontron. Any unauthorized review, use,
disclosure or distribution is prohibited without express written consent
of Kontron. If you are not the intended recipient, please contact the
sender and destroy all copies of the original message and enclosed
attachments.</font>
</div>
</BODY></HTML>