[ipxe-devel] Boot in IPv6

[Wissam Shoukair]

Thanks Oliver.
I flashed my ipxe-binary, compiled with the build option NET_PROTO_IPV6.
What do I need to do now, in order to get the ipxe to boot (or even get an IP) over IPv6 protocol?

-----Original Message-----
From: ipxe-devel-bounces at lists.ipxe.org [mailto:ipxe-devel-bounces at lists.ipxe.org] On Behalf Of Oliver Rath
Sent: Tuesday, 09 September, 2014 11:26 AM
To: ipxe-devel at lists.ipxe.org
Subject: Re: [ipxe-devel] Boot in IPv6

Hi Wissam,

there is no official standard yet for pxe-booting over IPv6. So you have to look into your Bios for IPv6-pxe-availability and configure it for loading a i.e. undionly.kpxe-file via IPv6 over tftp.

Then you can proceed with ipxe in the new IPv6-way.

If your network cards supports flashing an ipxe-binary, you can try generating a bootrom for your card.

Hth,
Oliver


Am 09.09.2014 um 10:18 schrieb Wissam Shoukair:
> Hi all,
> 
> I'm new to the IPv6 interface in iPXE. How I can boot only over IPv6 ?
> 
>  
> 
> Thanks,
> 
> Wissam Shoukair
> 
> 
> 
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
> 


--
GreenUnit.UG
Agnes-Pockels-Bogen 1
D - 80992 München
Tel.: +49 89 8905729-15
Fax:  +49 89 8905729-29
mailto:oliver.rath at greenunit.de

Geschäftsführer: Dipl.-Ing. Günter Rath
Amtsgericht München, HRB 187881
Internet: www.greenunit.de
_______________________________________________
ipxe-devel mailing list
ipxe-devel at lists.ipxe.org
https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel