[ipxe-devel] pausing wimboot for debugging?

Brian Rak brak at gameservers.com
Fri Mar 21 15:46:10 GMT 2014


Ah, I'm using WinPE 5.0 (from the 2012R2 ADK).  Interestingly enough, 
the same font list works with WinPE 3.1.  I don't have anything using 
4.0 right now though.

On 3/21/2014 11:42 AM, Hummel Frank wrote:
>
> As far as I know the necessary set of fonts depends on the version of 
> bootmgr.
>
> I use bootmgr.exe V6.3.9431.0 which is PE4.0 I think.
>
> Win8.1 contains PE4.1 as far as I remember.
>
> But my PE Build system (winbuilder) does not work with Win8.1 sources 
> -- so I still use Win8.0x64 sources.
>
> mit freundlichen Grüßen
> with kind regards
>
> i. A. Dipl.Ing. (FH) Frank Hummel
> Systementwicklung
> System development
>
> ads-tec GmbH
> Raiffeisenstr.14
> 70771 Leinfelden-Echterdingen
> Germany
>
> Tel.:    +49 711 45894-220
> Fax:    +49 711 45894-987
> E-Mail: F.Hummel at ads-tec.de <mailto:F.Hummel at ads-tec.de>
> Web: www.ads-tec.de <http://www.ads-tec.de/>
>
> *Von:*ipxe-devel-bounces at lists.ipxe.org 
> [mailto:ipxe-devel-bounces at lists.ipxe.org] *Im Auftrag von *Brian Rak
> *Gesendet:* Freitag, 21. März 2014 16:31
> *An:* ipxe-devel at lists.ipxe.org
> *Betreff:* Re: [ipxe-devel] pausing wimboot for debugging?
>
> That's interesting, because my working config doesn't use that font at 
> all :)  I only use the four I mentioned plus 'wgl4_boot.ttf'.
>
> I think the font list you need varies depending on what version of 
> WinPE you're booting.
>
> On 3/21/2014 11:27 AM, Hummel Frank wrote:
>
>     Hi list,
>
>     according to my working config only this font is missing:
>
>     segoen_slboot.ttf
>
>     mit freundlichen Grüßen
>     with kind regards
>
>     i. A. Dipl.Ing. (FH) Frank Hummel
>     Systementwicklung
>     System development
>
>     ads-tec GmbH
>     Raiffeisenstr.14
>     70771 Leinfelden-Echterdingen
>     Germany
>
>     Tel.:    +49 711 45894-220
>     Fax:    +49 711 45894-987
>     E-Mail: F.Hummel at ads-tec.de <mailto:F.Hummel at ads-tec.de>
>     Web: www.ads-tec.de <http://www.ads-tec.de/>
>
>     *Von:*ipxe-devel-bounces at lists.ipxe.org
>     <mailto:ipxe-devel-bounces at lists.ipxe.org>
>     [mailto:ipxe-devel-bounces at lists.ipxe.org] *Im Auftrag von *Brian Rak
>     *Gesendet:* Freitag, 21. März 2014 16:15
>     *An:* ipxe-devel at lists.ipxe.org <mailto:ipxe-devel at lists.ipxe.org>
>     *Betreff:* Re: [ipxe-devel] pausing wimboot for debugging?
>
>     You're missing a few fonts it seems:
>
>     chs_boot.ttf
>     cht_boot.ttf
>     jpn_boot.ttf
>     kor_boot.ttf
>
>     I seem to recall seeing similar issues when there were missing fonts.
>
>     On 3/21/2014 7:41 AM, Oliver Rath wrote:
>
>         Hi list,
>
>         is it possible to pause the wimboot-process after extractiing
>         the bootmgr?
>
>         Here happens the following at the moment:
>
>           * ipxe boots
>           * ipxe loads following
>
>               o kernel /wimboot
>               o initrd /bootmgr
>               o initrd /boot/bcd
>               o initrd /boot/fonts/segmono_boot.ttf
>               o initrd /boot/fonts/segoe_slboot.ttf
>               o initrd /boot/fonts/wgl4_boot.ttf
>               o initrd /boot/boot.sdi
>               o initrd /sources/boot.wim
>
>           * ipxe start wimboot
>           * wimboot extracts bootmgr.exe from bootmgr (if i see right
>             in the short time) <- here pausing would be great
>           * screen gets dark and nothing happens anymore
>
>         Is it possoble to pause wimboot, before it gives control to
>         bootmgr.exe ?
>
>         Regards
>         Oliver
>
>
>
>
>
>         _______________________________________________
>
>         ipxe-devel mailing list
>
>         ipxe-devel at lists.ipxe.org  <mailto:ipxe-devel at lists.ipxe.org>
>
>         https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>
>     _______________________________________________
>     ads-tec GmbH
>     Sitz: 70771 Leinfelden-Echterdingen
>     Registergericht Stuttgart HRB 224527
>
>     Geschaeftsfuehrer:
>     Dipl.-Ing. Thomas Speidel
>     _______________________________________________
>     Diese E-Mail enthaelt vertrauliche und/oder rechtlich
>     geschuetzte Informationen. Wenn Sie nicht der richtige
>     Adressat sind oder diese E-Mail irrtuemlich erhalten
>     haben, informieren Sie bitte sofort den Absender und
>     vernichten Sie diese E-Mail. Das unerlaubte Kopieren,
>     jegliche anderweitige Verwendung sowie die unbefugte
>     Weitergabe dieser Mail sind nicht gestattet.
>     _______________________________________________
>
>     This e-mail may contain confidential and/or privileged
>     information. If you are not the intended recipient (or have
>     received this e-mail in error) please notify the sender
>     immediately and destroy this e-mail. Any unauthorized
>     copying, disclosure, distribution or other use of the
>     material or parts thereof are strictly forbidden.
>     _______________________________________________
>
> _______________________________________________
> ads-tec GmbH
> Sitz: 70771 Leinfelden-Echterdingen
> Registergericht Stuttgart HRB 224527
>
> Geschaeftsfuehrer:
> Dipl.-Ing. Thomas Speidel
> _______________________________________________
> Diese E-Mail enthaelt vertrauliche und/oder rechtlich
> geschuetzte Informationen. Wenn Sie nicht der richtige
> Adressat sind oder diese E-Mail irrtuemlich erhalten
> haben, informieren Sie bitte sofort den Absender und
> vernichten Sie diese E-Mail. Das unerlaubte Kopieren,
> jegliche anderweitige Verwendung sowie die unbefugte
> Weitergabe dieser Mail sind nicht gestattet.
> _______________________________________________
>
> This e-mail may contain confidential and/or privileged
> information. If you are not the intended recipient (or have
> received this e-mail in error) please notify the sender
> immediately and destroy this e-mail. Any unauthorized
> copying, disclosure, distribution or other use of the
> material or parts thereof are strictly forbidden.
> _______________________________________________
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ipxe.org/pipermail/ipxe-devel/attachments/20140321/47abfca1/attachment-0001.html>


More information about the ipxe-devel mailing list