[ipxe-devel] some problem when initial devices in ipxe.efi

[Robin Smidsrød]

iPXE as an UEFI app doesn't yet work. You'll need to load it as a driver
or rom, AFAIK.

-- Robin

On 10.07.2013 09:56, Yixuan Huang wrote:
> when I used snponly.efi, (make bin-x86-64/snponly.efi) same issue.
> 
> Thanks,
> yixuan
> 
> 
> On Wed, Jul 10, 2013 at 3:27 PM, Yixuan Huang <yixuan178 at gmail.com
> <mailto:yixuan178 at gmail.com>> wrote:
> 
>     Hello,
>     I built ipxe.efi in my rhel6.4 platform with git clone that latest
>     code level.
>     And I enable ftp/https protocols.
> 
>     my system is ibm x3650m4, last time when i used pre-build binary
>     ipxe.iso,
>     network cards can be set and http can work.
> 
>     But this time, it seems no nic worked. i first boot from uefi-shell,
>     then run ipxe.efi.
> 
>     screen like following:
>     ipxe 1.0.0+(9361) ...
>     Features: FTP HTTP HTTPS DNS TFTP EFI Menu
>     No more network devices
>     iPXE initialsing device...
> 
>     it will hang...
> 
>     question:
>     * how can i build other nic drivers or which one can support all nics?
> 
> 
>     Thanks,
>     yixuan
> 
> 
> 
> 
> _______________________________________________
> ipxe-devel mailing list
> ipxe-devel at lists.ipxe.org
> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
>