[ipxe-devel] tg3 broken on compaq nc6320.

Denis 'GNUtoo' Carikli GNUtoo at no-log.org
Sun Jan 13 11:54:15 UTC 2013


Hi,

With HEAD on master, ipxe is stuck at initializing devices...

I bisected and it gives that commit as guilty:
f6840ba83e60631e6561a957f11867b206edd7d9 is the first bad commit
commit f6840ba83e60631e6561a957f11867b206edd7d9
Author: Thomas Miletich <thomas.miletich at gmail.com>
Date:   Mon Jan 30 23:10:52 2012 +0000

    [tg3] New tg3 driver
    
    Replace the old Etherboot tg3 driver with a more up-to-date driver
    using the iPXE API.
    
    Signed-off-by: Thomas Miletich <thomas.miletich at gmail.com>
    Modified-by: Michael Brown <mcb30 at ipxe.org>
    Signed-off-by: Michael Brown <mcb30 at ipxe.org>

:040000 040000 546b1b5f584d4699dd3e33a34f33c1abce254408
70478d0c1836f6fc69885e7636dcd88249ddd172 M	src

Here's my setup detail:
02:0e.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5788 Gigabit Ethernet [14e4:169c] (rev 03) Subsystem:
Hewlett-Packard Company Device [103c:30aa] Flags: bus master, 66MHz,
medium devsel, latency 64, IRQ 16 Memory at e8110000 (32-bit,
non-prefetchable) [size=64K] Capabilities: [48] Power Management
version 2 Capabilities: [50] Vital Product Data
	Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
	Kernel driver in use: tg3
	Kernel modules: tg3
The computer is a compaq nc6320.

Denis.



More information about the ipxe-devel mailing list