[ipxe-devel] Win8 reboot fails after sysprep

Oliver Rath rath at mglug.de
Fri Aug 16 01:48:37 UTC 2013


Hi list,

i work here with win8, which is created on an iscsi-volume (lio-target).
The installation runs fine. Now i wantet to clone this to a similar pc,
so ich sysprepped it and restarted for test on the same pc.

ipxe starts well, win8 _starts_ well, but after a few seconds it hangs,
then it reboots with a failure "inacessible boot device"

wireshark logged as last action an iscsi-command, followed by an "nop
in", repeated several times.

Has anybody experience with sysprepping on an iscsi-device? In the net
there are no experienes found.

btw, first i had the same issue like hech with the zeroed mac-address,
but this was able to be solved by new nics.

Im using undionly.kkpxe with poweroff and reboot enabled.

Any experience here with sysprepping on a iscsi-target?

Tfh!

Oliver





More information about the ipxe-devel mailing list