[ipxe-devel] Rhel Wrong Mac address problem

Volkan BULBUL vbulbul at NETAS.com.tr
Fri Jul 20 13:51:28 UTC 2012


iPXE> ifstat
net0: 00:02:bb:ab:04:a4 on PCI01:00.0 (closed)
  [Link:down, TX:0 TXE:0 RX:0 RXE:0]
  [Link status: Unknown]
net1: 00:02:bb:ab:04:a5 on PCI01:00.0 (closed)
  [Link:down, TX:0 TXE:0 RX:0 RXE:0]
  [Link status: Unknown]

-----Original Message-----
From: Michael Brown [mailto:mbrown at fensystems.co.uk] 
Sent: Friday, July 20, 2012 4:49 PM
To: ipxe-devel at lists.ipxe.org
Cc: Volkan BULBUL
Subject: Re: [ipxe-devel] Rhel Wrong Mac address problem

On Friday 20 Jul 2012 14:45:02 Volkan BULBUL wrote:
> I am trying to install Rhel to system using PXE. We have a shelf and
> there are 16 blades on it. One of these set the network address
> informations and these all blades normally have 5 eth port and eth0
and
> eth1 are alwasy used for base Network and installation and
communication
> between blades are complete from these interfaces. When we set pxe
> server and restart the blade it starts the system from DHCP with
> ..:..:a2(eth0) and ..:..:a3(eth1) MAC addresses. However, ipxe or Rhel
> anaconda show us the MAC addresses as ..:..:a4(eth1) and
..:..:a5(eth1).
> For this reason system can not continue to installation because of
wrong
> MAC addresses.

Thanks.  As I asked previously, what output do you get from the "ifstat"

command in iPXE?

Michael


Bu e-posta mesajı ve ekleri gönderildiği kişi ya da kuruma özeldir ve gizlidir. Ayrıca hukuken de gizli olabilir. Hiçbir şekilde üçüncü kişilere açıklanamaz ve yayınlanamaz. Eğer mesajın gönderildiği alıcı değilseniz bu elektronik postanın içeriğini açıklamanız, kopyalamanız, yönlendirmeniz ve kullanmanız kesinlikle yasaktır ve bu elektronik postayı ve eklerini derhal silmeniz gerekmektedir. NETAŞ TELEKOMÜNİKASYON A.Ş.  bu mesajın içerdiği bilgilerin doğruluğu veya eksiksiz olduğu konusunda herhangi bir garanti vermemektedir. Bu nedenle bu bilgilerin ne şekilde olursa olsun içeriğinden, iletilmesinden, alınmasından, saklanmasından ve kullanılmasından sorumlu değildir. Bu mesajdaki görüşler gönderen kişiye ait olup, NETAŞ TELEKOMÜNİKASYON A.Ş.’nin görüşlerini yansıtmayabilir. 

This e-mail and its attachments are private and confidential and intended for the exclusive use of the individual or entity to whom it is addressed. It may also be legally confidential. Any disclosure, distribution or other dissemination of this message to any third party is strictly prohibited. If you are not the intended recipient you are hereby notified that any dissemination, forwarding, copying or use of any of the information is strictly prohibited, and the e-mail should immediately be deleted. NETAŞ TELEKOMÜNİKASYON A.Ş. makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the transmission, reception, storage or use of such information in any way whatsoever. The opinions expressed in this message are those of the sender and may not necessarily reflect the opinions of NETAŞ TELEKOMÜNİKASYON A.Ş.





More information about the ipxe-devel mailing list